Powerduct. Who Has Fitted Or Made One?

[Clowndog]

Haven't found a specific thread yet for this cold air intake mod. Anyone care to share what they ave done to get colder air in, or if thy ae instaled the official "powerduct"?

Bet there's a bunch of people who've made there own.

Share your work/secrets!

[iamhe77]

Cueing Andy65b....

[andy65b]

Your request is my pleasure.

See this link of how I made mine and some pics of it.

http://www.skylinesaustralia.com/forums/M3...html&st=140

I fitted a piece of foam glued to a piece of L shaped plastic like the other plastic I used to seal off the front.

Cheers

Andy

[Clowndog]

Your request is my pleasure.

See this link of how I made mine and some pics of it.

http://www.skylinesaustralia.com/forums/M3...html&st=140

I fitted a piece of foam glued to a piece of L shaped plastic like the other plastic I used to seal off the front.

Cheers

Andy

I thought I saw that a while ago! Nice work; I like the home job coz thats what i wanna do. what about the air filter? What did you use there? Are you actually getting colder air u reckon?

[KiwiRS4T]

I made one by using a tub (like an icecream tub but actually had nails in it) about 140mm square behind the LH headlight cut a hole in the base near the top and fitted a one litre castrol oil container (so that it was also black) with the top and bottom cut off going into a hole cut in the front of the top of the standard airbox. Sealed all joints except the one going into the airbox to make it easier pull apart and remove when necesary.

Gave me an extra 20KW and cut a second off my 1/4 mile time. (Just kidding). No way of measuring the improvement really but plenty of air gets by the headlight at speed. Unfortunately the LH corner took the brunt when I wrote off my S1 so now I will have to start again. This time I also have an air diverter and scoop (from the group buy) to fit so that should help.

[andy65b]

I thought I saw that a while ago! Nice work; I like the home job coz thats what i wanna do. what about the air filter? What did you use there? Are you actually getting colder air u reckon?

I haven't actually measured the temp difference but I am sure I am getting more cold air. The difference is noticeable at the top end. A bit less breathless at higher RPM.

Along the leading edge of the bonnet there is a rubber seal that runs most of the width of the bonnet. You need to either cut off about 4 inches on the intake side to make sure the cold air can get in. Or you can do what I did and that is fit a piece of wire inside the rubber seal and bend the rubber with the wire inside 90 degrees so it is out of the way.

I am using a K&N filter. I am not sure there is any real difference with it but at least it isn't a reason to slow the air intake.

Cheers

Andy

[Jetwreck]

or you could just get lazy and buy one!!!!

be prepared to get bent over by Nissan though

[Bis-e Bee]

or you could just get lazy and buy one!!!!

be prepared to get bent over by Nissan though

I am ready and lubed up

I might get one put it when I take it for it's 60,000 km's service which is due in about 1500km's.

It's close to $200 isn't it?

I want to keep this thing genuine, has anyone got any pics of what the actual powerduct looks like?

[zei20l]

go check a V35 engine bay, its the vent guide where that piece i removed from your airbox goes.

im considering getting one also. genuine i mean

[Daleo]

Geniune, pfft. Genuine rip off... A little bit of your time, some pinchweld and some black spraypaint.

Spend some time making something for your car, it's good for the soul.

Save your money for petrol .

Either that or eoi for stainless steel structure, tig welded, bolts, pinchweld, ready to fit; $100.

The queue begins here, I'll post pics if people are interested.

Edited April 27, 2009 by Daleo

[Bis-e Bee]

Is this the thingy jig were talking about?

Has anyone gone down the "cold air induction" road? If so how much did it set you back, which system did you use, and what was the performance gain like?

[zei20l]

thats exactly it!

please note the airbox in those pics has a blitz panel filter

[[[d a n n y]]]

CAI

i had it on my ca for about 3-4 days

took it back off

it was loud and the turbo spooling and all that crap..

but seem to drink way more petrol than normal..

and it lost abit of bottom end power

[zei20l]

wanna sell it to me cheap?

got any pics of it danny?

[Daleo]

That is the item. The factory one is a very neat piece, I just used a piece of flat 1mm stainless, rolled the curve into it, tig'ed a lip around the edge, used a piece of pinchweld from Clark rubber. Rolling the compound curve was the hardest part of the whole exercise.

It was the first thing I did when I bought my car, so I'm not sure of the gain, but too much cold air never hurt an engine . Nice induction roar tho'.

[andy65b]

I agree with danny that it looses a small amount of bottom end power but the upside is the top end.

Consumption may be a bit worse. Maybe I will change it back and watch the economy for a while.

Edited April 27, 2009 by andy65b

[[[d a n n y]]]

I agree with danny that it looses a small amount of bottom end power but the upside is the top end.

Consumption may be a bit worse. Maybe I will change it back and watch the economy for a while.

actually good idea i might run a full tank with a pod filter and full tank with no filter and see the difference

[Jetwreck]

$174 from memory

[iamhe77]

or you could just get lazy and buy one!!!!

be prepared to get bent over by Nissan though

$174 from memory

LOL!!

I guess you are standing in front of your computer at the moment?

Must be a bit tender to sit, eh?

[Jetwreck]

LOL!!

I guess you are standing in front of your computer at the moment?

Must be a bit tender to sit, eh?

the only good thing that came out of it was that my wife didn't speak to me for a week....I didn't have to have 1 six pack holiday* all week!!!!

*Definition: Six pack holiday - Go to the closest bottle shop(1 minute away for me) - buy six pack - drink six pack before arriving home so the wife does not see - wait ten minutes - your on holiday! - e.g. wife's voice sounds a bit BLAH BLAH BLAH BLAH!!!....GOLD I say!!!!

Edited April 27, 2009 by Jetwreck