Jump to content
SAU Community

R34 100k Service

Pandoraa

By Pandoraa,
in Engines & Forced Induction

 Share

Recommended Posts

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted

Timing Belt is a MUST at 100,000kms.

Might as well do your fan belts.

The usual things,

Oil (Which you have done)

Oil Filter (Which you have done)

Fuel Filter

Air Filter / Air Pod (Just a clean will do)

Spark plugs (Which you have done)

Radiator Coolant flush

You could do your Gear Box and Diff Oils...

Check Brakes (Pads / Rotors / Calipers)

Your Tyres would need a check (tread level and air pressure level)

Tighten up bolts and over general check over of the car in and out.

The main things anyway, but if still unsure, take it to your mechanic and see what they say as they should know what is fully required at 100,000 kms.

Pandoraa Contributor

Pandoraa

Posted
  • Author
Posted
Timing Belt is a MUST at 100,000kms.

Might as well do your fan belts.

The usual things,

Oil (Which you have done)

Oil Filter (Which you have done)

Fuel Filter

Air Filter / Air Pod (Just a clean will do)

Spark plugs (Which you have done)

Radiator Coolant flush

You could do your Gear Box and Diff Oils...

Check Brakes (Pads / Rotors / Calipers)

Your Tyres would need a check (tread level and air pressure level)

Tighten up bolts and over general check over of the car in and out.

The main things anyway, but if still unsure, take it to your mechanic and see what they say as they should know what is fully required at 100,000 kms.

Alright thanks...

It is a good start.. I will take a look over everything and do what i can then take it into Nissan to complete the ods and ends..

83CKS Proficient

83CKS

Posted
Posted
as stated, do the timing belt, mine is at 96000 now and the timing belt is starting to look a bit cracked and perished (got the new gear on the way)

kudos motorsport sell a 100,000km service kit.

How much do they sell the Kit for??

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted
Awesome!!

Sorry to hijack the thread, But do you know whats included in the kit?? (Off the top of your head)

http://www.skylinesaustralia.com/forums/Ni...0,000km+service

Nissan RB25DET (R34, C34 Neo Engine)

Price: Starting From Only $567.60

Standard Kit Components:

Genuine Nissan Timing Belt

NSK/NTN Idler & NSK/NTN Tension Bearing, Tensioner Spring

Genuine Nissan Cam Seals

Genuine Nissan Front Main Seal

Genuine Nissan Water Pump

Genuine Nissan Thermostat

Genuine Nissan Oil Filter

*Please note that NSK & NTN are the original equipment manufacture (OEM) of the Nissan timing belt idler & tensioner bearings.

Silver_GT Collaborator

Silver_GT

Posted
Posted

100,000km Service Kit, Nissan R34 25GT (RB25DE, Neo 6) $455.40

Contained within this service kit are the following:

1 x Genuine Nissan Timing Belt (Option to Upgrade to Heavy Duty Trust/GReddy Item, Please Select Below)

1 x Trust/GReddy Cam Gear, Intake, Adjustable (Optional, Please Select Below)

1 x Trust/GReddy Cam Gear, Exhaust, Adjustable (Optional, Please Select Below)

1 x Genuine Nissan Water Pump

1 x Genuine Nissan Thermostat

2 x Genuine Nissan Cam Seal

1 x Genuine Nissan Crank Seal

1 x Genuine Nissan Tensioner Bearing Spring

1 x Genuine Nissan Oil Filter

1 x NSK/NTN Timing Belt Idler Bearing

1 x NSK/NTN Timing Belt Tensioner Bearing

  • 1 year later...
nushtek Enthusiast

nushtek

Posted
Posted

is this kit still available?

100,000km Service Kit, Nissan R34 25GT (RB25DE, Neo 6) $455.40

Contained within this service kit are the following:

1 x Genuine Nissan Timing Belt (Option to Upgrade to Heavy Duty Trust/GReddy Item, Please Select Below)

1 x Trust/GReddy Cam Gear, Intake, Adjustable (Optional, Please Select Below)

1 x Trust/GReddy Cam Gear, Exhaust, Adjustable (Optional, Please Select Below)

1 x Genuine Nissan Water Pump

1 x Genuine Nissan Thermostat

2 x Genuine Nissan Cam Seal

1 x Genuine Nissan Crank Seal

1 x Genuine Nissan Tensioner Bearing Spring

1 x Genuine Nissan Oil Filter

1 x NSK/NTN Timing Belt Idler Bearing

1 x NSK/NTN Timing Belt Tensioner Bearing

jrm Veteran

jrm

Posted
Posted

100,000km Service Kit, Nissan R34 25GT (RB25DE, Neo 6) $455.40

Contained within this service kit are the following:

1 x Genuine Nissan Timing Belt (Option to Upgrade to Heavy Duty Trust/GReddy Item, Please Select Below)

1 x Trust/GReddy Cam Gear, Intake, Adjustable (Optional, Please Select Below)

1 x Trust/GReddy Cam Gear, Exhaust, Adjustable (Optional, Please Select Below)

1 x Genuine Nissan Water Pump

1 x Genuine Nissan Thermostat

2 x Genuine Nissan Cam Seal

1 x Genuine Nissan Crank Seal

1 x Genuine Nissan Tensioner Bearing Spring

1 x Genuine Nissan Oil Filter

1 x NSK/NTN Timing Belt Idler Bearing

1 x NSK/NTN Timing Belt Tensioner Bearing

is this kit still available?

It is - but doesn't doesn't include as much and costs more

Nissan RB25DET (R34, C34 Neo Engine) - Starting From Only$492.80

Standard Kit Components:

* Genuine Nissan Timing Belt (Optional Upgrade to Trust/GReddy or Gates Racing)

* Genuine Nissan Water Pump (Optional Upgrade to Nissan N1 Item, Where Applicable)

* NSK Timing Belt Idler Bearing (Ex RB20E)

* NSK Tension Belt Idler Bearing

* Genuine Nissan Tensioner Spring

* Genuine Nissan, or Aftermarket, Cam Seals

* Genuine Nissan, or Aftermarket, Front Main Crank Seal

Ref: http://www.skylinesaustralia.com/forums/Ni...vi-t137554.html

nushtek Enthusiast

nushtek

Posted
Posted

thanks man, i will check it out

is this kit still available?

It is - but doesn't doesn't include as much and costs more

Nissan RB25DET (R34, C34 Neo Engine) - Starting From Only$492.80

Standard Kit Components:

* Genuine Nissan Timing Belt (Optional Upgrade to Trust/GReddy or Gates Racing)

* Genuine Nissan Water Pump (Optional Upgrade to Nissan N1 Item, Where Applicable)

* NSK Timing Belt Idler Bearing (Ex RB20E)

* NSK Tension Belt Idler Bearing

* Genuine Nissan Tensioner Spring

* Genuine Nissan, or Aftermarket, Cam Seals

* Genuine Nissan, or Aftermarket, Front Main Crank Seal

Ref: http://www.skylinesaustralia.com/forums/Ni...vi-t137554.html

  • 6 months later...
Blue Dog Newbie

Blue Dog

Posted
Posted

Just wondering how you went with your service? I'm attempting it on my 34 also and I have found leaky cam seals. Problem is I need to get the VVT actuator off. Do you know if the nut is reverse thread or not?

There is a notch on the Allen key head which sometimes means reverse thread, either way it's bloody tight. Like to know how you went?

Cheers

Mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Shifting questions

      By MBS206 · Posted

      Sell it and buy something newer? 😛
    • Predator1
      Shifting questions

      By Predator1 · Posted

      Better then PooPooG... or is it PeePeeG? 
    • PotatoCake
      Is r33 gtr steering wheel the same as the gtst?

      By PotatoCake · Posted

      The steering wheel on my 97 s3 gtr is a little bit worn out, so im on the hunt for something mint. I notice that this type of steering wheel is on several other nissan's of the era.  Does anyone know if their all identical, or are there slight differences? I feel like gtr tax applies to anyone selling one, but if it comes from any other car the price is much less, even though its the same design.  Chat gpt says the material for the gtr is slightly different and it says gtr on the wheel, but every pic ive seen it just says nissan. 
    • GTSBoy
      Shifting questions

      By GTSBoy · Posted

      I might have to say it.
    • dbm7
      Shifting questions

      By dbm7 · Posted

      Ahh... it's an early RE5R01A box, that means the pinouts I gave are wrong (they were for the RE4R01A 4-speed box)... I'll have to dig around in my docs to see if I've got that schematic (they used the same gearbox plug, with the vacant pin wired to the direct drive clutch solenoid)...prolly hidden away in a supplement somewhere... ...there were 3 variants of the RE5R01A ~ this early schema was what we called the 'dumb' 5 speed ; it's what jatco called a 'medium duty' box, with torque holding up roughly ~200ft/lbs or so, which was good for NA from RB20/25DE and up to around VG30 output spec. With the RB25DET (and VG33/35 mills), the only options they had was the 4-speed 4AX00 box, which had been beefed up to handle the extra torque (primarily for the VG35, but it also suited the RB25DET mill and others)...and the RE4R03 box in large 4WDs a lot of the time... ...the next variant of 5-speed was redesigned, stronger, and 'smart'...first ones had external TCU with internal (on valvebody) Shift Control Unit, pressure switches, and 2 x TSS...and the last ones had internal TCU+SCU setup, with CANbus control etc etc. @DRoc81 On the RHS of the box towards the rear, there should be a stamped silver ID tag -- what's the model number? Oh...and with the early 5-speeds, the torque converter control solenoid assembly should be replaced as well (31940-60X00)...it's a bit Murphy's Law ....if one has failed, bet on the rest not being far behind ...
×
×
  • Create New...