Jump to content
SAU Community

Recommended Posts

Hi all,

I am sure this question has come up here a hundred times, so if you couldn't be bothered answering, I'd greatly appreciate if you could supply LINKS

to sites that will answer the question.

I'm looking at buying an R34 GT Vspec II but I'm not 100% sure that the differences are between the:

R34 GTR

R34 GTR Vspec

R34 GTR Vspec II

When I go to inspect the car, what are some pointers I should look for that tell me that it really is a Vspec II and not a Vspec or normal GTR?

Thanks all!!

Link to comment
https://www.sau.com.au/forums/topic/267422-r34-gtr-vspec-vspec-ii/
Share on other sites

COURTESY OF GOOGLE AND WIKIPEDIA

5th generation (1999–2002)

Fifth generation An R34-generation Skyline GT-R V-Spec

Production 1999-2002

Assembly Tochigi, Tochigi, Japan

Body style(s) 2-door coupe

Layout Front engine, rear-wheel drive / all-wheel drive

Engine(s) 2.6 L I6

Transmission(s) 6-speed manual

The GT-BNR34 (R34) Skyline GT-R and GT-R V-spec models were released in January 1999. The R34 GT-R was also made to be shorter (from front to rear), and the front wheels were made closer to the front. The valve covers were also painted glossy red, rather than dull black.

A new feature on the R34 GT-R is a 5.8" LCD multifunction display on the center of the dashboard, which shows seven different live readings of engine and vehicle statistics such as turbocharger pressure (1.2 bar max), oil and water temperature, among others. The GT-R V-spec model added two extra features to the display: intake and exhaust gas temperatures. Nismo Multi-function Displays (MFD)can be bought at an extra cost, they include a lap timer and an increase in boost pressure measurement to 2 bar. R34 rears are longer than previous models.

Like the R33, the new R34 GT-R V-spec models come equipped with the ATTESA E-TS Pro system and an Active LSD at the rear, while standard GT-R models come with the non-Pro system and a conventional mechanical differential. The V-spec model also had firmer suspension, and lower ground clearance. The V-spec model also included a plastic front air diffuser (covering the underside of the engine), and also a rear carbon fiber air diffuser, designed to keep air flowing smoothly under the car.

Another special model of the R34 GT-R is the M-spec. It was similar to the V-spec, but had special "Ripple control" dampers and a leather interior with heated front seats.

At the time of the R34's release, like the R32 and R33, Nissan released an R34 N1 model. The R34 GT-R N1 was equipped similar to the R32 and R33 N1 models - a homologation special. It was sold without ABS, air conditioning, audio equipment, rear wiper, or carpet in the trunk. The new R34 N1 was also given the new R34 N1 engine. Only 45 R34 N1 models were produced from the factory, 12 of which were used by Nismo for Super Taikyu racing. The rest were sold to various customers, mostly racing teams, and tuning garages.

In August 2000, Nissan released a newer V-Spec II GT-R model. The V-Spec II has increased stiffness in the suspension (even stiffer than the original V-spec) and had larger brake rotors on the rear. It also comes equipped with a carbon fiber hood, which is lighter than the aluminum that all other GT-R hoods are made from. Also different on the V-Spec II was an iridium center console and aluminium pedals. The seats were also made with black cloth rather than the gray cloth used on previous R34 GT-R models, and the amber turn lenses were replaced with white versions. From this point on the standard trim level GT-Rs and V-Specs also received these updates, with the exception of the carbon fiber bonnet.

In February 2002 Nissan released a final production model of the R34 GT-R called the Nür. Nissan also released a limited Manufacturer Special model designated the M-Spec. This came in two forms, the base M-Spec, and the Nür. The Nür was sold in 2 different models: the Skyline GT-R V-spec II Nür and the previously mentioned Skyline GT-R M-spec Nür. The Nür was named after the famous German Nürburgring racetrack, where the Skyline was developed. The Nür model featured an improved RB26DETT based on the N1 racing engine, used by Nismo in Motorsports. The V-spec II Nür is based on the regular V-spec II model, and the M-spec Nür was based on the regular M-spec model. Other than the addition of the Nür engine, the Nür models also included a different color of stitching on the interior trim, as well as a speedometer reading up to 300 km/h (186 mph).

http://www.skylinesaustralia.com/forums/Ni...GTR+DIFFERENCES

Read that =)

Also this is from Sewids post -

The GTR is the base model while the GTR and V-Spec were being made most cars came out of the factory as V-Specs.

V-Spec has added fruit such as:

- Carbon fibre rear underbody tray

- Intercooler intake temp sensor

- Exhaust temp sensor

- Upgraded MFD to show data for these two extra sensors

- Slightly different tacho (cant remember how exactly)

- Active rear diff (maybe on all R34 GTRs?)

- Faster ATTESSA computer (maybe on all R34 GTRs?)

The V-Spec II has all of the above plus:

- Carbon fibre bonnet

- Different rear brakes (very slightly different apparently)

- Black cloth seats (as opposed to grey in the earlier models)

- Aluminium pedal set

- Aluminium map pocket

- Aluminium faced CD player

- Firmer suspension (probably not 100% on this)

- Different radiator (plastic topped)

- Larger rear Nissan badge

- Updated MFD with extra functions such as a lap counter and possible data logging?

- Different front bar?

- Probably more

The M-Spec is basically a V-Spec II except for the following:

- Aluminium bonnet (same as V-Spec) with carbon bonnet option

- Different paint options

- Improved ride quality due to softer suspension

- Black Leather seats, hand stitched, heated

- a few other things that wrxhoon could probably add - I've compared my V-Spec to his M-Spec before but im sure im missing some bits

The Nur cars are different again.

The Z-Tune is nothing really to do with R34 GTR models.

What about weights, does anyone have any accurate info on the difference in weight between these models

not alot has been mentioned about weight between the models...

there isnt much difference at all between........

Series 1

Skyline R34 GT-R: 1540kg

Skyline R34 GT-R V-Spec: 1560kg

Series 2

Skyline R34 GT-R: 1540kg

Skyline R34 GT-R V-Spec II: 1560kg

however, There are specs on the M-spec, M-spec NUR & V-spec 2 NUR have a fair difference in weight

im not sure if this is a misprint or true weight, but this is whats been stated.

Skyline R34 GT-R M-spec: 1800kg

Skyline R34 GT-R M-spec NUR: 1800kg

Skyline R34 GT-R V-spec II NUR: 1780kg

not sure how much the N1 weighs though

I reckon it should be as follows.

Skyline R34 GT-R M-spec: 1600kg

Skyline R34 GT-R M-spec NUR: 1600kg

Skyline R34 GT-R V-spec II NUR: 1580kg

There's no way 200+kg was added.

yeah thats what i was thinking

i had an article on the M-spec model on the HPI magazine but i must of thrown it out. it probably said on there...

yeah 300kg is a bit way too much

  • 3 months later...
i've been constanly told by my customer that my v-spec 2 is a fake because its black and they dont come in this colour???

Your customer doesn't know the difference between his head and his arse because there were definitely black V Spec II's made.

Your customer doesn't know the difference between his head and his arse because there were definitely black V Spec II's made.

Badzzz huh +1 on black vs2's but jst in case ill go to my garage and double check mine lolz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey everyone, I recently bought myself a 2001 Nissan Stegea M35, and I've had a few issues that I had to fix, my car would start intermittently and I had a bad rocker cover leak, after a couple days of looking I finally found a part number that interchanges with the OEM starter as the OEM starters at $1300 and I can't afford that, this starter was only $270 and I replaced the start and still had the same issues, I posted a video asking for help online and it went very well, some guy said it was probably a bad ignition switch so I took my dash apart and turns out my ignition switch was half screwed in and was loose, once it was tightened it fired right up, I found a local place called "Boost factory" and they sold me a part of OEM Nissan rocker covers, they were $600 which was a shocker but I couldn't find them anywhere else, so I installed them and fixed my oil leak as the old rocker cover was cracked and warped, I now need to replace my boost air inlet hoses as they have some cracks.
    • I am being real ocd and do not want to make amy mistakes so appreciate all help provided. I am overly cautious so asking for opinion even if i know the answer   few questions,   1.re tensioner, should spring be greased lightly?    2.tensioner has two washers , one pressure washer and other has recessed/ seat. I am going to put the recessed one facing tensioner where edges are cut out and pressure washer on top   3. my car has custom triger kit sold few years ago by guy who initially built the engine. I moved the crank gear and it moved in and out easy, only way to remove belt is to slide the crankshaft gear forward which I did. I have seen these being very tough to move , anything to do with my woodruff key?   it has a crank sensor shown in purple which I assume reads from the 12 teeth position mounted to the crankcase gear   4. timing belt doesn’t have arrow stating front or back just a arrow which I think is direction of rotation . Do you agree?   5.i figured out why my crankcase cover was worn as there was no washer installed over the crankcase cover before the harmonic balancer was put in place. It is missing, anyone knows the part number? It looks like this https://justjap.com/products/genuine-nissan-crankshaft-timing-gear-rear-plate-washer-nissan-s13-ca18-a31-r32-rb20-r33-r34-c33-c34-c35-rb25?currency=USD   https://tinypic.host/image/IMG-4535.382Zy2 https://tinypic.host/image/IMG-4537.382dSz https://tinypic.host/image/IMG-4534.382q4U  
    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
×
×
  • Create New...