Jump to content
SAU Community

Recommended Posts

Would it be a mistake to fit pilot sport cup tires to my skyline that is only a fair weather

and occasional driver training / casual track day car?

A mistake as in .. not worth the bucks, too noisy on the road, wear too fast vs the next

best semi-slick?

I have potenza RE01-R now, which were decent, but are nearing the end of their life.

(Getting new tires sourced in australia even average ones are expensive but I can get

a set of 265 pilot sport cups via fedex for about $1600).

Link to comment
https://www.sau.com.au/forums/topic/267446-pilot-sport-cups/
Share on other sites

I had The pilot sports (granted not the cup) on the front for a while, was a 225 40 r17 on a 9"rim and the amount of flex was horible and they had almost no grip, squeeled horibly in hard corners to. Was so bad that I actualy took them off and got someting else...

By comparison, I had RE 050 bridgestones on the front before that in the same size and they were excelent...

I had The pilot sports (granted not the cup) on the front for a while, was a 225 40 r17 on a 9"rim and the amount of flex was horible and they had almost no grip, squeeled horibly in hard corners to. Was so bad that I actualy took them off and got someting else...

By comparison, I had RE 050 bridgestones on the front before that in the same size and they were excelent...

I had PS2s on an audi and liked them. But the Cups are something else again, they are basically

a road legal slick. Absolutely impossible in the wet. They were standard fitment on the M3 CSL and

scared the bejeesus out of drivers who thought a bit of rain would be ok.. I read they are

popular with porsche cup drivers on track days.

I'm not really in doubt over their track performance, just wondering if they'd been tried and rejected

by other skyline drivers for one reason or another.

f1clc_1062625480_pilot_sport_cup.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Unlikely, as per Greg's post. This is not helical diff behaviour unless one wheel is up off the ground. Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion. In case it isn't clear, I consider the process to be stupid. Nike.
    • How much does the shifter move when the car is in gear with the engine off? If it is more than about 1cm you need to replace your shifter bush. Your shifts will just get crunchier, not faster, with a short shifter unless you also rebuild the whole box
    • I should video mine, will prob do it tomorrow    Between 1st and 3rd, you could fit another two gears. That is how loose and wobbly it is   horrible:(
    • Throws on the FS5R30A in most Nissans of this era are actually quite short and direct compared to any remotely modern BMW with the S6-53 transmission. Those things have throws a mile long with rubbery vague everything. Synchro issues combined with a short shifter is just going to break everything even faster.
    • Only thing I'd add...is on recommendation from a good diff shop, I've used mineral oil in my diff including the race car for years. The synthetics can be too slippery and glaze the gears
×
×
  • Create New...