Jump to content
SAU Community

Stagea Nm35 Mod Parts

Nick Bailey
 Share

Recommended Posts

Bis-e Bee Mentor

Bis-e Bee

Posted
Posted
Hi

Any-one have any info on mod parts for the NM35. I am trying to find coilovers, intercooler kit, pod set-up, ecu, exhaust etc.

Have you had a look through the M35 Info topic to see if some of these are covered there?

Most of these things have been discussed at some point over the past few months, do a search of the topics and you may find most of the answers.

iamhe77 Grand Master

iamhe77

Posted
Posted
Hi

Any-one have any info on mod parts for the NM35. I am trying to find coilovers, intercooler kit, pod set-up, ecu, exhaust etc.

Hi Nick,

Welcome to the forum.

What kind of info are you after?

Company names? Product names? Product numbers?

Nothing special about the NM35 in regards to mods.

Just your usual suspects such as ARC, HKS, Bilstein, Nismo, Blitz etc.

Don't bother looking in Aus unless you are after filters, wheels or brakes.

Almost everything else will have to come from Japan of the US.

Nick Bailey Apprentice

Nick Bailey

Posted
  • Author
Posted
Hi Nick,

Welcome to the forum.

What kind of info are you after?

Company names? Product names? Product numbers?

Nothing special about the NM35 in regards to mods.

Just your usual suspects such as ARC, HKS, Bilstein, Nismo, Blitz etc.

Don't bother looking in Aus unless you are after filters, wheels or brakes.

Almost everything else will have to come from Japan of the US.

Nick Bailey Apprentice

Nick Bailey

Posted
  • Author
Posted
Hi Nick,

Welcome to the forum.

What kind of info are you after?

Company names? Product names? Product numbers?

Nothing special about the NM35 in regards to mods.

Just your usual suspects such as ARC, HKS, Bilstein, Nismo, Blitz etc.

Don't bother looking in Aus unless you are after filters, wheels or brakes.

Almost everything else will have to come from Japan of the US.

Thanks for the help, just picked up my MN35 in Sydney, fresh of the boat. Drove it back to Brisbane, great wagon, can't wait to spend some money on it.

The first thing I am doing is the wheels and coil-overs. I have all the info on who makes them, but am trying to find a decent price.

If any-one has any connections or advice on where to get a the best price on Tein or HKS it would be greatly appreciated.

Could any-one also tell me how to get the auto gear knob of so I can remove the console. Also need to get the dash cover/trim of to remove the CD Player. I have had a look and it is not obvious and I don't want to damage anything.

Thanks

iamhe77 Grand Master

iamhe77

Posted
Posted (edited)
If any-one has any connections or advice on where to get a the best price on Tein or HKS it would be greatly appreciated.

Could any-one also tell me how to get the auto gear knob of so I can remove the console. Also need to get the dash cover/trim of to remove the CD Player. I have had a look and it is not obvious and I don't want to damage anything.

Thanks

Coilovers would be cheaper to get shipped over than to try to get a Tein or HKS Australian supplier to get them in.

Ain't going to be a cheap exercise.

Yep, as stated the gear knob is basic stuff. Just pull the grey plastic base down (you won't break it), pop the u shaped clip out and pull the main part of the knob up (Iain & Stephen - No need to comment).

HERE is how to remove the rest of the console to get behind the cd player

Edited by iamhe77
Bis-e Bee Mentor

Bis-e Bee

Posted
Posted
Yep, as stated the gear knob is basic stuff. Just pull the grey plastic base down (you won't break it), pop the u shaped clip out and pull the main part of the knob up (Iain & Stephen - No need to comment).

Oh sheesh! you just like to spoil all our fun. :cool:

knobs and flanges......

dude youre just leaving it open for me :P

Hmmmm... Knobs and openings, someone is frustrated :happy:

Bis-e Bee Mentor

Bis-e Bee

Posted
Posted
Don't know you that well mate!

But I suppose if that is what floats your boat, than fantasize all you want!

I would be keeping Iain well and truly away from your dump pipe if I was you man :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 GTR EV? The leaf of the Godzilla's!

      By GTSBoy · Posted

      Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Butters
      UniClutch

      By Butters · Posted

      Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • joshuaho96
      R32 GTR EV? The leaf of the Godzilla's!

      By joshuaho96 · Posted

      Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • RB2533
      UniClutch

      By RB2533 · Posted

      Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • Duncan
      Rv37 400r questions

      By Duncan · Posted

      My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...