Jump to content
SAU Community

Recommended Posts

Hi mate,

Part Number is 18016 - AB000 if this part number dont come up on the fast at Nissan try this number 18015 - AB000 but im pretty sure its the first number.

there are some rubbers available with the parts but not sure if you will need them

these are part numbers for the rubbers 18014 - AB001

post-7461-1241057501_thumb.jpg

they are some sweet pedals are they easy to install, i want to get rid of the stock just rubber ones on my 33 s2 gtst

the clutch and brake pedals just go over your existing pedals these V-spec pedals have a rubber backing and pull/clip over the old ones

hi there,

there are 6 parts in the whole set:

1. Foot Rest Panel - 67845-AB000

2. Clutch pedal - 46531-AB000

3. Brake Pedal - 46531-AB00

4 Clutch pedal bush - 18014-AB001

5 Brake pedal bush - 18014-AB000

6 Accel pedal - 18016-AB000

total price should be $13,540 yen without shipping.

hope this help...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Me coming to check the thread to see if my manual boost controller was set up correct......  
    • Ah yes but were you responsible? In the time I've had it (just before Christmas) I spun off the track twice and drove into things twice, so four separate incidents.. in two outings. Luckily I have a full OEM GTR front end to put on which is hopefully not a precursor for further, future, more expensive mistakes to come. It is some consolation that anyone who would want to buy my Altia bar would have to paint it anyway, the guards, too. (if they can get over the asymmetry). Hopefully over the weekend I will disassemble and see how badly things are bent. From what it looks like, the headlight has actually just been pushed back and bent the headlight support (which .. somehow... crushed the guard in). I guess the headlight plastic is strong stuff.
    • These things happen And I believe "we, the people, who modify stuff, and actually use it, cannot have nice things" It's just a shame that it happened so soon after paint  I still win the award for quickly destroying newly painted panels I think, as my car came back from the paint shop all nice and shiny, until about 4 hours later when the boot was destroyed by a wayward locker that was blown around by the wind.... What doesn't kill you makes you stronger, and poorer.....dooh
    • This. And also, the rotor thickness is constrained by the calipers. Cannot be much thicker, if at all. Cannot be much thinner, if at all. New rotors are....fairly cheap. Turbo calipers can still be picked up for sensible money. Arguably, the best thing is to get R32 calipers and put them on mount spacers on 324mm discs. That's about the cheapest and easiest way to get quite large brakes that are essentially bolt on. And that's despite maintaining for years that the R32 calipers are not the best choice because they seem to be more flexy and creaky than the others. If you were prepared to put up with nasty little NA sliding calipers, these will still seem like Brembos by comparison.
    • A quick Google said 297mm..
×
×
  • Create New...