Jump to content
SAU Community

Recommended Posts

Hi Guys,

Need a bit of help on fuel pump setup..

I dont want to go surge tank so im looking for an intank pump that will be able to flow enough to pump out 350awkw roughly

will a bosch 023 do it?

Iv got all supporting mods, nismo FPR and sard 800cc injectors.

Opinions please? would rather hear from guys who have setups making this kind of power and what they used to get there.. Ideally i want to go more then 350awkw however i think that will require a turbo upgrade again...

Thanks

Mass

Link to comment
https://www.sau.com.au/forums/topic/267715-r34-gtr-power-output/
Share on other sites

yeh iv already got the FPR from previous mods, now upgrading the injectors hence why i have an fpr and 800cc inj....

I was just a little hesitant with using the 044 intank.. Iv decided to drop in the 044, and yes iv got the -5's so im looking at pumping out 350.

One more question for those that know,

What do the stock AFM's run out of puff at?

Do i need to go for Z32's? i was looking at getting them but unsure as to wat the stockies flow awkw wise????

What boost are you gonna run Mass? Your still on stock internals like me, correct?

My set up is similar to yours but with different ECU. Ive got ~300AWKW at 1.2 Bar.

Im far from an expert but in the research I did, most people with 350AWKW upgraded their air flow metres to Z32s

I bet its at least x3 the cost of the 044.

I made 326 on 17psi with standard afms...you will require about 20psi to make 350odd, so depending on your tuner the afms may need upgrading.

I have a single Z32 afm and did make 380. Dont know how the tuner did it but he did...its all in the tune!!

hey guys,

thanks for the input so far....

Not stock internals anymore... engine is currently stripped and being built... its having the full treatment, forged internals, cams and sump etc.....

i was looking at a pfc d jetro instead of the Z32's but i think i might play it safe and just go Z32's with the pfc iv already got...

Only other thing i need to look at now is coil packs... tossing up between JJR and Splitfires??? not sure on the differences?

Hey guys, just a question out of curiosity as I begin stage 1 mods, but what are most of you running, 80mm or 90mm exhausts on your GTR's? I have an R34 GTR Nur with the N1 engine etc. Does the extra size really make that much difference in power?

Cheers,

Ed

Only other thing i need to look at now is coil packs... tossing up between JJR and Splitfires??? not sure on the differences?

Whats wrong with stock coil packs? Buy the HKS Twin Spark and you will have no issues!

Thanks guys....

As far as i know my coils are fine, not failing, but i dont want to throw it on the dyno up the boost and find its suffering coz of coils....

So i thought the JJR's are a good cheap alternative, however unsure on quality???

Dunno bout the HKS twin spark? wat is it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...