Jump to content
SAU Community

Recommended Posts

ok, well bombtrack and i are building a ke70 with an SR20det for a drift pig.

money is not huge on this build and we're aiming for around 200rwkw @ 950kgs stripped

planning on using an stock r34 turbo we have lying around and running e85

now a pfc is obviously the best cheapish option

BUT

could we get away with just a SAFC2 & an SITC?

e85 uses around 30% more fuel and is useless with out timing adjustment so an sitc would be needed, but will the safc be able to bend the signal far enough for the fuel? i dont have any real experience with safc's

i figure both could be had for around $500 second hand so its gonna be half the price of a pfc

Link to comment
https://www.sau.com.au/forums/topic/267728-sr20-ecu/
Share on other sites

$420 will get you a nistune chip + Tuner license ($220 for chip alone if some one else is going to tune it). $120 for a consult cable(Not needed if your not the tuner)

This will allow you to remap the stock ECU realtime. This will be just as good as a power FC and alot better than any piggy back system.

Link to comment
https://www.sau.com.au/forums/topic/267728-sr20-ecu/#findComment-4564853
Share on other sites

R34 turbo on SR20 ...

Aren't the flanges different???

You could make 200rwkw on E85 EASILY on a stock SR20 toooobo

Ben - dont get Trent into trouble and make him advertise, just send him a PM.

Although you know what Hamish - SR20 ECU's run pig rich, so running E85 on a stock ECU might lean it up nicely - sure it might ping a bit, but it would be free :P

Link to comment
https://www.sau.com.au/forums/topic/267728-sr20-ecu/#findComment-4568467
Share on other sites

ok, well bombtrack and i are building a ke70 with an SR20det for a drift pig.

money is not huge on this build and we're aiming for around 200rwkw @ 950kgs stripped

planning on using an stock r34 turbo we have lying around and running e85

now a pfc is obviously the best cheapish option

BUT

could we get away with just a SAFC2 & an SITC?

e85 uses around 30% more fuel and is useless with out timing adjustment so an sitc would be needed, but will the safc be able to bend the signal far enough for the fuel? i dont have any real experience with safc's

i figure both could be had for around $500 second hand so its gonna be half the price of a pfc

you can pick up a PFC without hand controller for under $700 if u shop around, and it has a better resale value than any of the other options when ur finished with it.

Link to comment
https://www.sau.com.au/forums/topic/267728-sr20-ecu/#findComment-4568676
Share on other sites

R34 turbo on SR20 ...

Aren't the flanges different???

You could make 200rwkw on E85 EASILY on a stock SR20 toooobo

Although you know what Hamish - SR20 ECU's run pig rich, so running E85 on a stock ECU might lean it up nicely - sure it might ping a bit, but it would be free :blink:

lol... d00d that is even too ghetto for teh pig...

yeah, was thinking of using an adaptor plate for the 34turbo, as we have one lying around (and a 33 one) but after speaking to trent i'm just gonna get a 2nd hand s15 turbo

you can pick up a PFC without hand controller for under $700 if u shop around, and it has a better resale value than any of the other options when ur finished with it.

true dat, but trent has hooked me up with a nistune board in ecu an case, so i'm stoked! deal DONE :)

Link to comment
https://www.sau.com.au/forums/topic/267728-sr20-ecu/#findComment-4568954
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...