Jump to content
SAU Community

Recommended Posts

It's 5 minutes between PMs, and is currently being trialled as a solution. I might knock it down to 3 after the bot plague has settled down a bit more. But for now I'm gonna keep it at 5 mins as we're still getting signups from uncommon IP's which then don't become active on the forum.

just bear with it for a while.

You've got it half right...

But see one of the many threads on it (funnily enough, a few threads below this one!)

http://www.skylinesaustralia.com/forums/Sp...re-t265283.html

http://www.skylinesaustralia.com/forums/Ba...kz-t264737.html

:cool:

now that people are spamming to get up the 10 posts needed to pm I have a new policy. Anyone caught spamming to get up their 10 posts gets their post count reset to 0 and a suspension with warning note. or we can just flat out ban them. but surely some people will be actual genuine members who are just impatient. so we can do reset to 0, suspension/warning, and then if they do it a second time - ban.

I've been watching those spamming - seems many are dodgy - its actually exposed thing even better

I've banned a few accounts because of useless spam attempts that clearly offer nothing.

I say we make it 100 posts and limit it to certain areas!

I've been watching those spamming - seems many are dodgy - its actually exposed thing even better

I've banned a few accounts because of useless spam attempts that clearly offer nothing.

I say we make it 100 posts and limit it to certain areas!

great idea 10 is a little too low, and someone who has just joined the site and community really doesn't need to PM people as they wouldn't know anyone

since there are admins in this thread i will ask my 2nd question here, rather than start a new thread >_<

2) have adding trader comments been disabled for a bit or just mine, can a Admin please look into it, thank you

I could make it so if your post count is over 100 then it drops the time limit. If you haven't been caught out by 100 posts then I'm fairly confident that you're a regular.

  • 9 months later...
I could make it so if your post count is over 100 then it drops the time limit. If you haven't been caught out by 100 posts then I'm fairly confident that you're a regular.

can you at least set it up so if you have over 100 posts its only 30 seconds or a minute to send another PM.... not the 4-5 minutes it is now :laugh: 

  • 5 weeks later...

Hey

Any chance some of the members that have been here a while (ie. me :P ) could get this PM thing dropped? I'm PMing every one in the group buy at the moment for details and the 5 minute thing is killing me :(

Does making a donation get rid of it?

Edited by PM-R33
  • 1 month later...

Is there a way to drop this delay for paying Traders such as myself who have also been on the forum for a while now?

Running a business, i dont get alot of time to check the forum, and when i do, i can get the other forums all replied within 10 minutes, meanwhile i have to wait 5 minutes for each pm i send which is impossible.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...