Jump to content
SAU Community

Recommended Posts

Well, the dream might be over before it started.. I need $$$ and am looking for interest on my Iron Mask coupe.

All mods were carried out in Japan, they include:

Bride fixed back seat

Side mount rail

Nardi 330mm wheel

Safety 21 1/2 cage

Pivot shift light

Speed/rev meter

Greddy boost controller

Greddy turbo timer

4x Omori/greddy gauges

Cusco strut brace

Cusco camber plates

Old FMIC kit

HKS POD

Grex Oil cooler + filter relocation

Kakimoto 3 inch exhaust with front pipe

Bilstein shocks

Lowered springs

15x6.5 SSR Formula mesh

IMG_0647.jpg

Picture089-1.jpg

Picture035.jpg

Picture027.jpg

Picture029.jpg

Picture097.jpg

Damage: Drivers door caught on something while reversing - 2 spare doors are included. Aus spec guards can be had for around $60

It is uncomplianced but falls under the pre 89 rule, so in theory it can be registered.

Like most DR's it has some rust.

The ECU was changed from a standard unit to a Mines one before it was picked up by the car carrier and now it won't start :banana:

Recent compression test came out fine.

It has the late DR30 bodykit complete in vgc.

$3000 as it sits, or closer to $4000 for it running good

Not looking at parting out yet.. Sorry!!

jarrydperkinson@gmail.com

Edited by D-limo
Link to comment
https://www.sau.com.au/forums/topic/267938-my-dr30-iron-mask-coupe/
Share on other sites

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Quite surprised in the interest generated. Price is revised to $3400 as is.. At that price I am just breaking even.

For $3400 I think its still alot of car for the money.

Car Now has a 350mm Nardi not pictured.

Is an Ex VIC car, Its featured on FJ20.com as well.

Ghostrider you have email.

Edited by D-limo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The more I think about it, the more I should probably go with a genuine Bride seat and rail set up. But damn the $$$ for a driver and passenger seat + rails!
    • From what I understand, stock internals should hold out for a while even if you run 500 at the crank, no? Especially if you don't run a modern turbo setup that reaches power and torque much earlier than the original twins. My engine isn't unopened either, it has N1 Pumps, head oil restrictor, new crank and cams, new piston rings, ARP head studs and Cometic headgasket along with 2860-5s. Considering everything is healthy this should run fine for a while I assume. Once my engine stops leaking shit everywhere, it'll be tuned to 370 crank first anyway, because I need to legalize the turbo setup. If I end up needing a new engine because my block actually has an issue, even though GTSboy was adamant that the whole porous block story is nonsense, before putting an engine in I'm probably gonna take care of the weakspots.
    • Hah, I have no issues with what you are doing whatsoever! You clearly know what you are getting yourself into. It's just funny reading things like this. "What's that noise?" "Oh, that's normal. That's just the engine not getting any oil. Nothing to worry about. It'll go away in a moment"  
    • Yeah I'm keeping an eye on it and might take it out as a once off if this doesn't fully charge. I did some research that said it's normal in equalisation charging. Voltage I thought was 20+ (faulty battery in multimeter) but now its on 15.9v, the max it should go to is 16.2v as per the manual. I'll provide an update once hopefully it's actually fully charged and in float mode. Waiting for it to go to 16.2v and not higher and see what happens. What I suspect has happened is that even though it's not an old battery, I did leave the car turned off for almost 4 weeks at one point then left it off for another 2 weeks which might have erroded the battery and is taking a long time to do this equlisation charge.
    • I wouldn't be using the seats a lot since it's on Historic rego and will not be driven a lot, however I also don't want to fork out 3k for something that won't last. Havent looked at BRZ seats, aiming for something of the same era I did speak to him on the phone once, and I do see your point haha. How many kms do you think you drove before they started wearing out? Just had a look at yours, certainly looking for a reclinable version. The Brides don't look too bad! I would still like to sit in one just to make sure it's what I'm after.    Thanks for the replies fellas. 
×
×
  • Create New...