Jump to content
SAU Community

Recommended Posts

  • Replies 186
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Soichi said he hasnt put it up on his page yet but he sent me a link to a tuner mate of his in wellington

http://www.speedtech...ent+System.html

and said all that you read there he can do

as in use the hks ecu as a piggy back install yet a stand alone ecu

and they have off the shelf harneses for the vq25det , he says look further down at make and model and ull see vq25det

Edited by Sidius

so why cant the nm35 run a stand alone ecu

wouldnt it be like any stand alone ecu

new ecu goes in and tuning , maping is done

all i know he said around 4g for full stand alone installed

beacuse like the gtr it has a whole lot of other shit to run off the factory ecu.

let him know its just a plug in loom with fcon and m35 and see what he says..

Haha, 2k for an install with a plug and play harness, I need to get on that gravy train... Even if it is tuned that's very expensive.

For 4k I would be putting a Motec M800 in I think.

At least you have an authorised HKS tuner around the corner, I would have to drive 1000k's

as scott said.

got the kakimoto R exhaust. i have not seen an exhaust where you can see straight through the 80mm of goodness(pipe) lol

for an exhaust shipped for $1000 i think its the best ive seen. cant guarantee it being quiet though :P

flames will definitely be happening. *looks at craig*

as scott said.

got the kakimoto R exhaust. i have not seen an exhaust where you can see straight through the 80mm of goodness(pipe) lol

for an exhaust shipped for $1000 i think its the best ive seen. cant guarantee it being quiet though :P

flames will definitely be happening. *looks at craig*

ph34r.gif

lol lets have a loudness competition when mines done :P

lol your using a flappy thing though arent you? or changed your mind? i have a feeling mines going to be louder than before, its seriously a straight through pipe. im amazed its beautiful lol.

^^lol show off

well heres some better and more accurate pics of the kakimoto system.

this is what came with it,

post-77654-0-34866700-1299615262_thumb.jpg

this is the mid pipe hotdog styled mufffler - straight through

post-77654-0-59174500-1299615273_thumb.jpg

and the tail pipe muffler - straight through.

post-77654-0-17714200-1299615278_thumb.jpg

can't wait to get this exhaust on.

^^lol show off

well heres some better and more accurate pics of the kakimoto system.

this is what came with it,

post-77654-0-34866700-1299615262_thumb.jpg

this is the mid pipe hotdog styled mufffler - straight through

post-77654-0-59174500-1299615273_thumb.jpg

and the tail pipe muffler - straight through.

post-77654-0-17714200-1299615278_thumb.jpg

can't wait to get this exhaust on.

scotty got any pics of ur front pipes, race cat and downpipe , my kaki n1 full mega is on its way

I don't even have the turbo yet buddy... Give me two weeks, unless you mean the old system? I fit it into Sage's car last night.

f**k i still want this 3.5 inch u ass.

Sidius, you wanna buy my dump off me? lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...