Hid Install Issues

[TENSE]

installed a kaixen hid xenon kit H3 into a 32gtr with projectors today,

wasnt exactly a plug'n'play affair but .. we managed

anyhow my issue is my cutoff point is good and all, but the actually light beam that is bright actually points down towards the ground .. while the cutoff is on the wall at a good height ..

went for a drive and had real bad problems seeing more than 10-20metres ahead as the bright light seemed to direct itself to the ground infront of the front bumper

second, there seems to be spots that appear above the cutoff point?

image of what i mean below

http://tinyurl.com/df8qfq

http://tinyurl.com/dzvfk6

(i am away the passenger side cutoff can go higher than the right side)

anyone had this issue?how did you go about fixing/correct the light ?

[__PhaseShiftDown]

There are 2 screw at the back of the headlight sticking out, and you can adjust where the projector is pointing by those.

[TENSE]

i have done that, the cutoff is all good, but the super bright patch of light seems to still shine towards the ground

you can see the bright patch of light just infrond of the car as opposed to the dimmer light up at the cutoff

[ali-turko]

never seen anything like that you have a real issue there

[TENSE]

someone has told me R32 projectors are old and crap ...

so .. how much/where can i get another set of projectors retrofitted to the BNR32 headlights? as i am willing to chop up a brand new set of late model subaru outback headlights and pull the projectors out