Jump to content
SAU Community

Recommended Posts

any more info on these? they look nice. jap stuff? forged? etc

they have a jap badge, but my guess is thats as far as it goes. u can only hope that weighing as much as they do means they have enough metal on them to keep them from breaking like glass, but u never know, just look at drift teks for an example.

CE28N my absolute favourite wheel. But 5k for a set of wheels atm is out of my budget. I agree with Fineline for the gtsts you need something with some dish to enhance the rest of the car. Flat faced TE37s & LMGT4s look arse. Get some tough offset meisters or some Volk GTCs and you are set.

dt05r aren't forged. they are pretty much drift teks but have a dish lip but the dish doesn't come out if you know what i mean. good jap stuff though. theres a set going for about 1800 on the nissan silvia forum in chrome. they look tuff. 18x9 +20 will need lip at the front but rears should be o.k depending on how low you are where u might also need roll.

i use to have a r32 gtst and had meisters 17x9 +38 fronts and +37 rears. they were just inline with the guards with the rears poking out a tad. i chucked them on my r33 gtst and they were so sucken in the guard. i'm very sure r33s can take 17x9 or even 18x9 +20 pretty well.

have a look. hot as wheels for sure.

http://www.m2-hanbai.com/m2_new/M2_HP/whee...D-18/04-v1.html

BBS Lms are also hot but yeh need good offset.

and regamasters.

regamaster.JPG

na, TE-37's look shite on gts-t's / gtt's, not enough offset to get depth into the spokes. GTR only, same with LM-GT4's

No, its just when people put weak offsets on GTS-t/GT-t's are too weak to do any guard mods or put any effort into making good offset wheels fit. Low offset (or GTR offset, god i hate that term!) TE37's can easily fit a R33/R34, check out the S13 below. It runs 17x9.5 +12 front and 17X10 +18 rears and a S13 has much smaller guards than a R33/R34

P1080921.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...