Jump to content
SAU Community

What Is This -> Black Plastic Cover Where Rear Mud Flap Should Be?

mario
 Share

Recommended Posts

mario Contributor

mario

Posted
Posted

hey guys,

Giving the car a good ol' detail the other day and while I'm washing I get to the rear wheel wells, and notice at the back of the

sideskirt where you would imagine a mudflap to located, that general area, there is a small black plastic cover/casing that seems

to serve no purpose other than to hold up to the last 6months of driving worth of dirt / glass / bits n pieces of whatever you ever

drive over and from wherever.

I didnt try get under the car to remove it, but there seems to be no hole so it doesnt act as a drain, its literally just there for what

seems to me, to catch dirt and make my cleaning job longer than what I had anticipated due to the amount of dirt that came out

of it.

Anyone able to shed some light on what this might actually be there for ?

You can almost bend it 120degree's to try remove the dirt it holds, and it wont snap or break and will just go straight back to its

original position also.

Be interesting to see what other people say/ think or even knew if it was there..

mario Contributor

mario

Posted
  • Author
Posted

time is limiting factor here with photos unfortunately, that and the fact it would be all black on black if I took something..

quite simple really... go to the rear wheel well of your car, you can see where the side skirt finishes, put your hand inside the wheel well

right behind the skirt and you will feel this big black plastic cover that is open at the top..

you can stick your fingers into the hole it creates, then you realise you can bend it back and all of a sudden you notice all the dirt n crap

it holds in it....

rs73 Grand Master

rs73

Posted
Posted

how would that work?

I didn't remember seeing anything around the door jamb when the doors were opened that could indicate some path of air to escape if that's to equalise the pressure...

maybe just a bad design, and they decided to put a plastic cover on top to reduce the whole crap load of sh1t it would have collected without the cover?

boodsGtr Enthusiast

boodsGtr

Posted
Posted
how would that work?

I didn't remember seeing anything around the door jamb when the doors were opened that could indicate some path of air to escape if that's to equalise the pressure...

Not necessarily from the door jam. Some cars have them so when you close the doors, the cabin pressure that builds up when you close the door is released through a vent at the rear, enabling the door to be closed easier.

Might not be the case for this, but a possibility.

Boods.

  • 2 weeks later...
scathing Grand Master

scathing

Posted
Posted (edited)

Is it behind the wheel? Almost like a L-shape when viewed from side on (a vertical piece, with a flat horizontal tray) where the horizontal bit is a quarter circle?

There'll be one on either side of the car, but have different shapes.

Edited by scathing
BLISTC Experienced

BLISTC

Posted
Posted
Is it behind the wheel? Almost like a L-shape when viewed from side on (a vertical piece, with a flat horizontal tray) where the horizontal bit is a quarter circle?

There'll be one on either side of the car, but have different shapes.

you still have not helped us solve the mystery... what does it do!?

mario Contributor

mario

Posted
  • Author
Posted
Is it behind the wheel? Almost like a L-shape when viewed from side on (a vertical piece, with a flat horizontal tray) where the horizontal bit is a quarter circle?

There'll be one on either side of the car, but have different shapes.

yeah thats it, no idea wtf it does or why it there though

scathing Grand Master

scathing

Posted
Posted (edited)
you still have not helped us solve the mystery... what does it do!?

Just making sure I'm talking about the right thing first. :(

yeah thats it, no idea wtf it does or why it there though

It is probably the OEM rear diffusers. They smooth the airflow leaving the rear wheel well.

On the Australian delivered 350Z, it's standard on the Track and optional on the Touring (I ended up picking up a set for my Touring from the USA). Apparently the Touring has a Cd of 0.30, and the Track (with a small chin spoiler, rear bootlid spoiler, and these rear diffusers) drop the Cd to 0.29.

When I spoke to Pro Concept about it they told me they took theirs off their race car. Like you, Josh said the only thing they were good for is collecting dirt whenever they came off the track. If it takes those 3 items above to drop the drag co-efficient by only 0.01, taking them off will probably do sweet f**k all.

Edited by scathing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      New Stegea Owner

      By PranK · Posted

      Welcome Thomas! Sounds like you've made some progress. Are you able to drive it and enjoy it a bit now ? 
    • The Bogan
      New fix for low tyre pressure from bmw

      By The Bogan · Posted

      HUMVEE are fine in big open areas, but they are problematic on the street and tight areas As for reliability, some of the  US Army guys I have chatted with have said that when they were working they were fine, but, the do spend alot of time in workshops for multiple reasons, admittedly, they did get a hard time by the boys and girls who drove them I would definitely put them in the "buyer beware" category  They do look tough as nails though 
    • GTSBoy
      R34 gtt rb25det neo timing belt kit

      By GTSBoy · Posted

      Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • GTSBoy
      Another little story of weird shit happening

      By GTSBoy · Posted

      I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • GTSBoy
      braided lines for the turbos

      By GTSBoy · Posted

      For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
×
×
  • Create New...