Jump to content
SAU Community

My Rb25det Turbo And Manifold Upgrade

youbUTEy
 Share

Recommended Posts

youbUTEy Enthusiast

youbUTEy

Posted
Posted

ok, i am new to this forum, i have been on boostcruising before but have been told this is the place to be for help on skylines :(

now, i am upgrading my turbo and manifold, and indeed whole engine bay, and i have a few questions, i live in a remote country town so i have no services at my disposal, nor can i just pop into the shops and grab a silicon hose so i am doing i t from scratch and online lol. and i have just bought a new high mount manifold, turbo, and wastegate, and i just wanna make sure i have it right before putting it together. although there is a boilermaker who can weld for me :(

firstly, on the external wastegate, its a 38mm, i dont know what psi the spring is loaded at, but there is the barb at the top, and a threaded hole at the bottom and i dont know what they are forr, see pic, so if you could tell me that would be great.

IMG00371.jpg

and second, on the exhaust side of the turbo, do i just get a gasket made up to suit the plate, and get an exhaust (dump pipe) made to fit??? and wtf is that little hole? it just goes right thru to the intake, my old dump pipe has 2 pips into 1, do i just do the same thing with this?????????

i guess the question is how do i connect the turbo to the exhaust? ((and there really is not much room behind the manifold down to the exhaust, how have people overcome this??))

IMG00370.jpg

or, i have found these on ebay, but they dont have the 2nd little hole, can i just block up the hole with the flange and gasket????

or do i need to have the smaller hole coming into the big pipe?

fdgfsdfgsg.jpg

and 3rd, on the turbo itself, what is that little bolt at the end before where you connect the cooler piping? that little brass bolt?? what is supposed to go into there?

IMG00369.jpg

thanks heaps if you can help me out

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Noice. Mostly.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • GTSBoy
      I need more than help to finish my R33

      By GTSBoy · Posted

      Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • marni
      I need more than help to finish my R33

      By marni · Posted

      Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • joshuaho96
      My BMW 335i

      By joshuaho96 · Posted

      Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...