Jump to content
SAU Community

Recommended Posts

As we all probably know by now, those of us who have installed head units,

the r30 is a horrible car to fit a stereo to. The deck does not quite fit all the way in

and once the old one is removed there is a wide open gap that has to be filled with

something so there is no big gaps.

What have you done to overcome this, and has anyone got any different ideas

or a different location for a head unit?

Link to comment
https://www.sau.com.au/forums/topic/268540-head-units-in-the-old-r30/
Share on other sites

I'm using an OLD SCHOOL retro look POST mount radio cassette in a poverty pack centre panel & a 1/4 DIN equalizer in the ashtray and an FM modulated 10 stacker in the boot.

Looks a bit original and nobody is gunna want to steal my radio cassette eh?

The hole to the left is going to have a plastic pocket from an N12 pulsar or a gauge or 2.

Cheers, D

this is a neat setup, does give the thieves a good look at it though

Here is my setup. It is offset to the right. Easier to reach the controls.

2019157250041313032isLALx_th.jpg

I also have redone the boot with a shallow mount sub on one side and the amp on the back of the seat.

2322450670041313032ihkepc_th.jpg

Im not a fan of the glovebox job.

I think its good for classics that are worth 50k plus or for people that dont like using their stereos heaps.

Its not practical enough, just to turn the volume up or down or select another track.

Here is my setup. It is offset to the right. Easier to reach the controls.

2019157250041313032isLALx_th.jpg

I also have redone the boot with a shallow mount sub on one side and the amp on the back of the seat.

2322450670041313032ihkepc_th.jpg

I thought of offsetting it, i should of gone with it.

whats that sub like?

I need to get me one of them steering wheels, or perhaps a whole black dash!

so you drive around with the glove box open? or you get one of them

thumb controller thingys?

Had a similar setup once before and the unit came with a little hand held unit that controlled enough functions.

Glovebox could stay closed. I don't fiddle with the radio anyway usually...just have it on a station and leave it.

i removed my antenna from the roof when i painted the car, so i got no radio.

i keep wanting to go buy an electric in car one but i dont really like the radio anyway.

i just got a new deck with a usb input so it works like a giant ipod,

so i need to see the face so i can read the folder names.

hence the glovebox is not a good spot for my needs.

Ravenoak... Your's looks great... Is it just me or is your clock and climate settings different???

My car already had a deck installed when i got it and sits in the middle like Andrew's.. but mine doesnt sit in flush :P

I have seen some photos somewhere before where someone has offset the cd deck and had an aftermarket EQ to the right, thats always an idea for you Nick.

the decks dont fit flush coz there is no depth in the cavity for a standard size deck!

Ive fitted mine already in the center. i installed a volt guage and battery light to the left of it.

Made up an MDF panel to cover all the gaps.

Ill take a photo and post it up.

I thought of offsetting it, i should of gone with it.

whats that sub like?

I need to get me one of them steering wheels, or perhaps a whole black dash!

The sub is great. It is a special design from Clarion to fit in shallow depths. Plenty of punch but not doof doof. Clean, crisp and tight bass.

Ravenoak... Your's looks great... Is it just me or is your clock and climate settings different???

My car already had a deck installed when i got it and sits in the middle like Andrew's.. but mine doesnt sit in flush :D

I have seen some photos somewhere before where someone has offset the cd deck and had an aftermarket EQ to the right, thats always an idea for you Nick.

The clock and climate controls are black as opposed to the silver finish. I think this was the case on some of the RS's. My old Paul Newman had the silver finish.

cheers

07052009095.jpg

light is alternator light, forgot to wire it into the dash when changing the wiring loom.

Used MDF to make the panel around the deck, gonna laminate it matt black.

Edited by skybt1
07052009095.jpg

light is alternator light, forgot to wire it into the dash when changing the wiring loom.

Used MDF to make the panel around the deck, gonna laminate it matt black.

That is where I'm going. Thanks Nick.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSBoy on your suggestion on another thread I had a look at those injectors and ended up getting them because of the quality.  Got the expensive ones.  
    • Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
×
×
  • Create New...