Jump to content
SAU Community

I Want More Power

fletch63

By fletch63,
in Western Australia

 Share

Recommended Posts

reNEGaDe88 Proficient

reNEGaDe88

Posted
Posted

But those LS3 Clubby's weight 1800kg+. with 317Kw and more torque than a telemarketer.

Power to weight is 170kw per tonne.

So a R33 with 1400kg would need 250kw, =~250rwhp. Which is double. Just traction issues for both. More for 33.

Char Experienced

Char

Posted
Posted

yeah but wikipedia and red book says this stat and that stat and blah blah blah lol, power is a question of money, someone will always be faster.

a budget u've set of like $500-$1000 on a basically stock R33 isnt gonna get u far.

once u start upgrading things on ur car, its like pringles once u pop u cant stop.

reNEGaDe88 Proficient

reNEGaDe88

Posted
Posted

Well PFC's are discontinued. Great ECU's. But they are expensive 2nd hand and new from overseas. The wolf 3d v500 has huge capabilities and parameters. Top racing has been tuning them for ages. The ECU may have been average a few years ago, but that would have been V2 or V3 not V500.

The ecu's are Plugin Kits for Nissan R32,R33 GTST for $2,095. More people have gotten exposure to them in the last few years. So, its ur call.

reNEGaDe88 Proficient

reNEGaDe88

Posted
Posted
your forgetting 317kw at the flywheel.

so thats ~240kw atw considering 25% drivetrain loss.

However the torque is alot more in an LS3 than your 25 thats for sure.

Were u talking to me? 250kw at the flywheel is around 250hp at the rears, with tha 25% drivetrain loss's, and the conversion from HP to kW.

fletch63 Collaborator

fletch63

Posted
  • Author
Posted
Oh yeap, my mistake didnt see what you did there.

Converting from kw to hp half way through the post threw me off :down:

I'm more confused than ever now

If I may can I refine my original question now I have more info.

I reckon alot of guys have to me in my situation

I have a car that goes pretty quick

I just want it to go a bit quicker

I am sure I don't want an all out race car

just this one mod will do

I have about 180rwkw and want to go to 220-230 AND THAT WOULD BE IT !!!

I know it has to be a turbo upgrade and so an ECU upgrade (my stock ceramic is at its limit ...10-11lbs)

What can I do for $1500

will a piggy-back do if I am absolutely sure there will be NO MORE MODS

I have the exhuast, the intake and the FMIC

I know I won't need injectors for this HP (have the in tank 500HP pump tho)

I really don't want to go the dyno/tuning route if I don't have to....is this poss???....with piggy-back maybe????

But I will do it if I have to (maybe once!!!)

Pls help someone

rev210 Grand Master

rev210

Posted
Posted
I have about 180rwkw and want to go to 220-230 AND THAT WOULD BE IT !!!

Pls help someone

Why 220-230rwkw?

If all you want is a dyno readout then photoshop one.

On the other hand you can squeeze more 'go' out of your car but, sometimes there are compromises.

Tell us what it is you like about the car and exactly (as best you can) describe what you want the car to 'do' better. Set an actual goal.

This lessens the dollar waste and increases satisfaction because you have a design plan, not some half assed thought.

fletch63 Collaborator

fletch63

Posted
  • Author
Posted
Why 220-230rwkw?

If all you want is a dyno readout then photoshop one.

On the other hand you can squeeze more 'go' out of your car but, sometimes there are compromises.

Tell us what it is you like about the car and exactly (as best you can) describe what you want the car to 'do' better. Set an actual goal.

This lessens the dollar waste and increases satisfaction because you have a design plan, not some half assed thought.

I don't want a dyno readout at all !

As I said I don't even want to dyno my car

I like everything about how the 33 drives (my first turbo)

It is fast and I love the way it drives now

But I want that extra bit of grunt

Maybe 60-70 horses....just pull harder..a nice turbo hit and then pull hard

No burnouts or crap...

Does that answer your question????

dnbosiris Enthusiast

dnbosiris

Posted
Posted (edited)

SECONDED!!

that site is a friggin good no-nonsense resource..

but in short

a) as someone already said how are you gonna know how much power you will have unless you get it dyno'ed

b) if you highflow your turbo and increase the boost then the ecu is more than likely going to make the engine run rich so you're going to need some sort of ECU piggyback or replacement combined with a dyno tune to correct this.

Edited by dnbosiris
jase444 Contributor

jase444

Posted
Posted

get the biggest drop in injectors you possibly can around 740cc with a bosch o44 and a nismo fuel reg with a good computer and u can run 15 psi into your stock turbo and push just a tad over 300rwhp alot of people will say its not possible and not safe but it has been done

rev210 Grand Master

rev210

Posted
Posted (edited)
I don't want a dyno readout at all !

As I said I don't even want to dyno my car

I like everything about how the 33 drives (my first turbo)

It is fast and I love the way it drives now

But I want that extra bit of grunt

Maybe 60-70 horses....just pull harder..a nice turbo hit and then pull hard

No burnouts or crap...

Does that answer your question????

Good.

Your budget is too small for a start.

You like the nature of a fairly stock car and why not.

Getting the extra power is however something that doesn't say why 60-70hp is the magic number.

Why 60-70hp? Well you could upgrade the car to give you this amount of addtional power without really impacting the way the car drives too badly.

A new 2530 sized turbo would do this and with minimal difference in lag. Assuming you also take care of the tyres and suspension setup you can stick the extra power down to the road better.

You will ideally want an upgraded ecu and fuel pump and a beefier clutch friction plate (the stock pressure plate pressure is quite fine).

That will keep everything you like about the car but, up the power and straight line speed.

You want to be making use of that on a track by the way for full benifit. :P

Edited by rev210
R32 Driver Mentor

R32 Driver

Posted
Posted
get the biggest drop in injectors you possibly can around 740cc with a bosch o44 and a nismo fuel reg with a good computer and u can run 15 psi into your stock turbo and push just a tad over 300rwhp alot of people will say its not possible and not safe but it has been done

overkill for 300hp?

standard turbo will be out of puff before the injectors

and 15psi is to much

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      R33 fuel setup

      By r32-25t · Posted

      I used the radium thing, makes the whole parallel assembly a lot more compact compared to any other way of doing it 
    • TurboTapin
      R33 fuel setup

      By TurboTapin · Posted

      Racetronix also sells those ethanol content sensor bypass blocks. Adapter, Flex-Fuel E85 Sensor High-Flow Bypass, In-line No Sensor (ADF-FLEX-NS): Adapters - Flex Fuel | Racetronix Ethanol content sensor are originally designed to be on the feed line. These bypass blocks are meant to be ran in the feed line and not return. The continental ethanol content sensors have a 3/8" ID and not 5/16". This is why they are ran on the return line directly in conjunction with a low threshold sampling value VS in the feed with one of these blocks.    Haha we think alike, I used both original feed/return for 8AN feed, and one of the Hicas lines as a 6AN return. I also capped off and left the other Hicas line as a spare. 
    • -Jimmy-
      R32 gtst speedo out by 10kph

      By -Jimmy- · Posted

      Interesting, I haven't read about the issue with oil getting into the speedo in the cluster before. I'll have to take more notice with mine. The speedo on my R32's when I've run factory diff and tyre size have never been accurate as far as I can remember. The non Type-M GTS-t did come with 15" 5 stud wheels and smaller brakes, but that's less than 5% of them.
    • -Jimmy-
      My R32 Money Pit & The Headaches That Come With It

      By -Jimmy- · Posted

      Good to hear the condenser you picked up off my brother worked all good. Do you think there could be an issue with your AC compressor itself or the clutch on it then? I don't know a lot about them so I can't really help but keen to hear what it ends up being. Keep the build thread going man, it's nice to look back on over time.
    • Lithium
      Shoota's R33 GT-R RB30/26

      By Lithium · Posted

      This is a story of my life things, I learned eventually (thanks to someone calling me out) that my enthusiasm for discussing and sharing ideas that it came across as arrogance and I'm like... WTF?!    One thing I'm pretty sure I justifiably pride myself on is knowing that everyone will have things they can teach you, and you're always going to find out that something you think you know turns out wrong - you just don't know what it is until you get there.   Just the bursting enthusiasm that comes with ADHD when you hit something that gives you dopamine dumps can come across like you think everyone else is wrong or don't matter. But yeah, I'm a software engineer by trade and also do tuning in weekends and 100% have long had a reputation for  quickly making connections when resolving problems or forming solutions that I've sometimes had to take people form a long walk from start to end to explain how I ended up where I did when it's seemed "too simple" when I've stated my initial case, and had the "WTF" type reaction when they've realised how much was actually considered haha.   My reward is that I get all the curly problems thrown at me.
×
×
  • Create New...