Need Help

[Rits2.0tpig]

dose any one have tips getting an hcr32gtst past epa

convered all back to standerd

excepet spit fire coils

10psi actuator

3inc cat back

frount mount and piping

no bov

standard ecu( insted of mines ecu)

standard fule press reg ( insted of sard ajustable )

still with walbro 440 fule pump

standard injectors

new plugs

new oil 0w40 castrol edge

standard turbo & manafold (insted of t51 high mount)

standard air box mounted on angle due to intercooler piping(removing washer bottel to fit)

NEED HELP

wont pass on idle

DBs ok got down to 89db

ARGGG

dont know what else to do

[bozodos]

well putting recirc BOV back on would be a start, and maybe a standard exhaust if you can find one or another/more restrictive muffler.

[All_OVR]

dose any one have tips getting an hcr32gtst past epa

convered all back to standerd

excepet spit fire coils

10psi actuator

3inc cat back

frount mount and piping

no bov

standard ecu( insted of mines ecu)

standard fule press reg ( insted of sard ajustable )

still with walbro 440 fule pump

standard injectors

new plugs

new oil 0w40 castrol edge

standard turbo & manafold (insted of t51 high mount)

standard air box mounted on angle due to intercooler piping(removing washer bottel to fit)

NEED HELP

wont pass on idle

DBs ok got down to 89db

ARGGG

dont know what else to do

A guy i know got busted for his zorst being too loud he put a plate with a smaller hole between the flange on the cat it passed

[ydr030]

yep, and a compliance cat 2

[Rits2.0tpig]

A guy i know got busted for his zorst being too loud he put a plate with a smaller hole between the flange on the cat it passed

exhaust is now fine

still wont pass!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

disconced varex canon did the trick

and yes it now has an adr aproved cat

all before i went for the test!!!!!!!!!!!!!!!!!!!!!!!!!

dose any one have a clue!!!!!!!!!!

Edited June 9, 2009 by Rits2.0tpig

[bozodos]

Haha I'll let you know RE the exhaust, girlfriend just got an EPA notice for her Datto ute being too loud, will probably try drilled out bits of metal between flanges since it apparently already has 2 mufflers :S. I have had a flange put after the last bend of my pipe so I can swap over a cannon if need be.