Jump to content
SAU Community

Which intercooler to pick for a R34 GT-T

adznight

By adznight,
in Engines & Forced Induction

 Share

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

adznight Newbie

adznight

Posted
  • Author
Posted

The cooler kit cost me $1500 delivered. Although it's a bit more expensive than the equivelent HKS item in my eyes after seeing the quality of the ARC cooler it was money VERY well spent. The ARC cooler is not as big as the HKS Type S in size but it's power rating is more than enough for me. I'd be max 250kw.

Speak to dAVE in the Vic section for more details on them.

adznight Newbie

adznight

Posted
  • Author
Posted

Abo Bob - I know this may sound strange but after I put the cooler in I took it for a quick spin and it seemed to come onto boost with a lot more of a punch. I mean it wasn't boosting harder but just seemed to come on with more of a surge and there was a little bit more noise.

It's hard to tell what difference it made as I had the Power FC, FrontDump pipe and Bleed valve installed at once so it's now running 10psi after a dyno tune.

The power is pretty good and the delivery is awesome but I still want more. I don't really know how much more I can do without looking at a turbo upgrade though.

Dyno Sheet -

Cooler-10psi-Power%20FC-dump%20pipe.jpg

Have a look how restictive the stock dump pipe is! -

Dump%20pipe%20and%20Front%20pipe.jpg

You can see round the flange how small the pipe joining into it is. Around 2" would be my guess compared to the 3" I have on now.

Guest Robo's

Guest Robo's

Posted
Posted

Put some more boost into it. I repeatively done back to back runs from 10-13psi and we were gaining 10-15 up high, but midrange was like 20rwkw more, thats were you feel it. Just tell ICE you want some more boost. If you want more power, this is a fix until you get used to it.

adznight Newbie

adznight

Posted
  • Author
Posted

Had the car checked on the Dyno on the weekend, turns out was running far to lean at high boostRPM. Looks like my fuel pump had had it :cheers: I need a Bosch 975. Best price so far is $280. With it running a little richer is now making 190kw but boost curve drops at high end. Need to fit a HKS EVC to fix that. With a new controller should be around 200kw. Will post a dyno sheet.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Zabuza
      Need AC Compressor for R32

      By Zabuza · Posted

      Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was ￡307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • sonicii
      V35 Overheat + Coolant Boil & Overflow + Engine not Starting

      By sonicii · Posted

      As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...