Jump to content
SAU Community

Recommended Posts

I'm looking to remove the wiper soon. It's not JDM, its just crap. (Useful tho - does look homo but).

I was gonna just go to clark rubber and see if I can find something to suit. Anyone on here still selling the plug to fit?

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

You can buy a gromet like that from most auto stores (I bought mine at Autobarn) that fits it perfectly.

Never leaked water once and no one ever noticed it unless I pointed it out. I like the cleaner look without the wiper. Each to their own.

You're embarrassing.....and gay like a rear wiper on a R33

2021355_o.gif

And you got 2 gay wrestlers on your screen. Whos more gay. YOUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU, And if you own a toyota, please f off as this is Skylines Australia. LOL 1000000 times in your face.:whistling::domokun::nyaanyaa: :nyaanyaa: :nyaanyaa: :nyaanyaa: :nyaanyaa: :nyaanyaa: :nyaanyaa:

I'll have a look this weekend as to how to remove the bloody thing. I've always looked at it and thought "nah looks difficult".

Flip up the cap on the wiper arm, there's a bolt under there for the arm. The motor is just in under the pacel shelf in the boot, think it's a couple of bolts. Haven't removed mine but that's what I remember from looking at it.

Just reading over this thread, I was always under the impression rear wipers were standard on the series 1 33's? But I don't think I've ever seen a series II with one? Seems like I'm in the minority with a series II without one?

They came with a wiper standard but it was an option to have one w/out.

Very easy to get rid of using a grommet to fill the two holes.

I use rain x on my rear window to help stop water beading. 99% of the time there is NO need for a wiper.

If the water continues to bead then drive faster.:thumbsup:

Use the heater to de-mist it.

Flip up the cap on the wiper arm, there's a bolt under there for the arm. The motor is just in under the pacel shelf in the boot, think it's a couple of bolts. Haven't removed mine but that's what I remember from looking at it.

P306152220110306_0005.jpg

P306152320110306_0006.jpg

P306152920110306_0012.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...