Jump to content
SAU Community

Recommended Posts

Just got a phone call from the guys at Boost Magazine, I entered a competition at Compak Attak by subscribing to Boost magazine for a set of Kelford Cams and I won!

Woohoo!!

Details of the cams that are available to me are here..

http://www.camshaftshop.co.nz/index.php/vm...l-products.html

I think I will be going with the 264 with 9.35 lift because the engine only turns to 7300rpm MAX and has stock balancer and a N1 oil pump, or should I go 270's??

So cheers to the guys at Kelford Cams & Boost Magazine, my car is finally going to get some cams. Will do some install pics and before after Dyno Sheets to send back to kelford for feedback.

HL182_A_Camshaft_492bb66580485.jpg

Link to comment
https://www.sau.com.au/forums/topic/268855-won-a-set-of-cams-for-my-rb30det/
Share on other sites

yeh we have 264 and 272 also...Works well.

Congratulations mate...I bet you feel awesome! Nothing quite like winning shit...especially car stuff and ontop of that real performance car stuff!!! Fark im jealous now!

cheers ppl.

I am going to stick with the 264's. I do not rev this car so the smaller the better.

I was going to race the car this weekend but I will put it on hold untill the cams are in!

I aint sure I even needed the extra power but this is going to be a great test!

how much difference would the 270's to the 264's be

seeing that the lift is the same then it would be just change the revs where the power cuts in. I need the power to cut in as soon as possible.

Unsure if you have modified the inlet yet but with a nice exhaust manifold and inlet manifold mid 260's make their peak power around 7000rpm.

Look at Al's RB30det for example, nice inlet and exhaust mani with baby 256 cams but that too also holds well to 8000rpm and with some absolutely ripping mid range.

Mine with 265's idles baby smooth but if slightly leaned out on idle it will start to cam over 'slightly'. So tune it slightly lean on idle and then enable the o2 to pull it in when you want it to idle smooth. :D

Mine went from ~14degree's on 17psi to ~20-21degree's at peak power and made an extra ~30rwkw on pump.

Went from nosing over after it made peak power at 6000rpm to holding power flat for an extra almost 1500rpm, when tweaked with gears peak power is up 500rpm and still holds just as well with no loss in power to 7500rpm (my limiter is also at 7300rpm as Im still running the factory balancer)

The ramp rate on my 265's are a little more aggressive that the grind you will be getting

Mine have 227.9 degree's at 1mm vs 216degree's at 1mm for yours so mine run a ramp rate similar to their 270degree grind.

hrmm.. In stating that I'd almost be inclined to run the 270's. ;)

Edited by TheRogue

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Standard GTRs are boring and there plenty of them, do what ever you want to it and just remember nothing about them is cheap anymore and if you’re picky about how you want things done it gets even worse.    if it’s an n1 or something very limited then maybe care more about it’s heritage 
    • Alright guys, I've got good odds the motor survives due to a majority of spare parts. Who's taking bets on clutch, who's on transmission, and who's go diff? Happy to also take bets on if it still overheats in traffic or not 😛     Car looks amazing by the way. I've never been a fan of R34 rears, so really, I don't think any body kit etc solves that for myself, but the front end looks amazing!
    • As an ex-skyline owner Going off how these things are now "modern classics", I would keep the twins and just "refresh" bits that are required for reliable power and have a car you can take out for a cruise whenever you get the itch As a idiot who cannot leave things alone Going deep into the "rabbit hole" is a easy thing to do, as previously mentioned, once you start it becomes a slippery slope, wirh lots of supporting mods, and possibly rebuilds, and unless you have a bottomless pit of funds, the car can spend most of its life sitting in the garage,  broken, waiting for parts, or building more funds For a classic like a R32 GTR Basically, a reliable OEM+ refresh, that isn't a broken garage queen, is alot better than a car that you build, then break, then fix, then break again And it isn't just the engine you need to worry about, these beasties are getting on in age, and all parts are getting, and have got, expensive, the days of picking up cheap replacement engines and other driveline parts are well and truly over The funds not spent on going a single with quality parts, and with all the other other bits required to make it happen, could be spent on refreshing alot of other parts A wise man once said "If you cannot afford 2 GTR's, you cannot afford 1", I also believe he said this about 20 years ago when you could pick up a clean R32 GTR up for around $20k My advice for a R32 GTR (the one and only true Godzilla in my mind) is to think holistically about the whole car, the body, the power train, the suspension, the brakes, and the driveline SAU is a wealth of knowledge with decades of Skyline experience,  from stock, to OEM+, to modified to varying degrees, to full on or weekend or dedicated racecars, as well as full on money pits that rarely leave their garage Treat the old girl nice and give her what she deserves, you are a lucky man to own such a classic car  
    • For that price you could buy the hypergear turbo (big fan as I run one) and the Haltech ECU..
    • +1 for the Elite 2500. Get some new knock sensors while you are at it (pretty cheap), look up the TAARKS Nissan knock sensor kit. You may also want to get new coils (R35gtr) while your at it (assuming your on stock ones), as they are a liability. Mine started right up and idled fine on the base map. Also go MAP over MAF, as said above, Haltech make this super simple right out the box. Another fanboy of DBW here, Outsider Garage from your neck of the woods make some nice conversion gear for the R33 (that’s where I got some of my gear from).
×
×
  • Create New...