Jump to content
SAU Community

Installing Polyurethane Bushings

jnr_chin
 Share

Recommended Posts

jnr_chin Collaborator

jnr_chin

Posted
Posted

when installing the front control arm bushing (the one with the balljoint to be sure) it says to keep in the sleeve.

when installed it has some amount of play is this normal?

i also just used my hand to install them no vice or press

if too slack isnt this gonna make my car handle bad?

Link to comment
https://www.sau.com.au/forums/topic/268973-installing-polyurethane-bushings/
Share on other sites
bigmikespec Veteran

bigmikespec

Posted
Posted

If you can push it in with your hand it is no good. What type of polyurethane bushes do you have?

I would love someone on here to confirm 100% whether you need to remove those sleeves in the control arms (or leave them in) when installing new bushes like Whiteline or Superpro.

Mike

jnr_chin Collaborator

jnr_chin

Posted
  • Author
Posted
If you can push it in with your hand it is no good. What type of polyurethane bushes do you have?

I would love someone on here to confirm 100% whether you need to remove those sleeves in the control arms (or leave them in) when installing new bushes like Whiteline or Superpro.

Mike

i have energy suspension bushings but they did not have r32 bushings so i used the s13 silvia but it seems like they are not identical majority works but i am having a bit of slack in the front control arm ones.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      RB25DET Solid lifter conversion

      By TurboTapin · Posted

      I've unfortunately never been as they're on the complete other side of the continent and another country that isn't currently letting us in as easily as they use to. I even heard their stop signs over there actually say "Stop" instead of "Arret". If I decided to trek the 48h drive, I wouldn't know when or where to stop haha. Whenever I order parts from UP Garage, I order from Japan as it's cheaper. Same with GKTech... oddly enough, it's cheaper shipped from Australia then it is the US.  UP Garage Japan operates their US leg though, unlike Tomei. If Tomei JPN had the power to close down Tomei USA, I'm sure it would be done in a day. They're two completely separate entities. Tomei JPN messed up somewhere originally agreeing to its creation and got sacked big time. 
    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      I asked someone about this and he told me about the Audi 1.8T engine. But I think it would be difficult to swap
    • MBS206
      The Cool Tools Thread

      By MBS206 · Posted

      I don't know that machine specifically, but I'd personally go for something with a little more kick than 130amp. Around up to 180 would be good. At the 6mm range, you're really pushing the machine hard and don't have a long period you can run for with out needing to give it a rest. Lots of MIG machines come with a regulator and hose. A lot will come with a starter roll of wire too, but it isn't too expensive to buy. I'd recommend NOT buying a massive roll too, as you don't want it sitting around FOREVER in the machine between uses and potentially going to shit. For thin sheet metal, get a roll of 0.6mm if you're doing over 3mm and above, switch over to 0.8mm wire. Even by 2mm you'd probably really want to switch. As for gas battle, it's all swap and go style now. You'll pay a bottle deposit, and then X amount to swap for a full one. I think it's like $200 or $300 for a D Size bottle upfront as "deposit", and like $110 to $150 per swap. My D size CO2/argon bottle lasts a fair bit of welding on the MIG. And I run an E size bottle on the TIG. For DIY MIG, stick with a D size bottle. If you really start to get into a LOT of welding and doing it really regularly, then upgrade. If you're like most DIY car guys, one D bottle will last you 2 or 3 years easily. I think I've been on my current bottle about 5 years. It is starting to get low, but I've been smashing it a lot more the last 6 months.
    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      SR20s came with cars like the Bluebird and Primera, but the RB20 never came. The ones in Turkey were either brought in specially or from abroad. That's why RBs aren't as common as SRs. And if a part breaks or I need to replace it when doing maintenance, it's harder to find parts for RBs.
    • GTSBoy
      SR20 to cefiro

      By GTSBoy · Posted

      I would suggest equally difficult to find, perhaps edging to the SR. Turkey has almost exclusively Euro market cars, some Korean, few Japanese other than pedestrian shite. I guess they're probably losing the fight against Chinese shit like we are now too. I would vote for a BMW V8, found in a 540i in a wrecking yard somewhere in Deutschland (or possibly Albania).
×
×
  • Create New...