Jump to content
SAU Community

Recommended Posts

Hi guys,

Ok here is the problem, a couple of weeks ago i noticed when turning left or right, smtimes even when braking, and esp acceleration the speakers started cutting out, like all sound went to the Right smtimes to Left speaker then came back to normal....Now thou, it is permanantly stuck on the righ side....i tried changing the balance but when i change to full on left speaker there is hardly any sound.

Anyone have any ideas on this?...or could identify any key areas where the problem might be...the speaker connections or the headunit connections?

oh and just like to clarify that my Headunit is perfectly fine, like nothing wrong with CD changer or anything.

Link to comment
https://www.sau.com.au/forums/topic/269175-speakers-going-haywire/
Share on other sites

clarify this fault - it happens when, under what rules, what source? radio and CD or CD only.

if so then it looks like you DO have a CD issue. it will drop an ENTIRE side. if you are losing it under both sources then the problem is still in the radio just in a different spot.

autosparky wont have a clue. unless you have the radio service manual ( I do) then you wont get a lot of help.

clarify this fault - it happens when, under what rules, what source? radio and CD or CD only.

if so then it looks like you DO have a CD issue. it will drop an ENTIRE side. if you are losing it under both sources then the problem is still in the radio just in a different spot.

autosparky wont have a clue. unless you have the radio service manual ( I do) then you wont get a lot of help.

Chris,

ok, well NOW it happens continuously, i.e its been like this for days ( the sound being stuck on the right side speakers. )

...and reading your post i went out and checked, it only happens in CD mode, in RADIO mode it is fine...so CD ONLY.

hope it clarifies it.

Chris,

ok, well NOW it happens continuously, i.e its been like this for days ( the sound being stuck on the right side speakers. )

...and reading your post i went out and checked, it only happens in CD mode, in RADIO mode it is fine...so CD ONLY.

hope it clarifies it.

it does. I have a car in the workshop now with the same issue. I have to tear it down on monday and the 'fault' lies in the CD section (where it runs through 4 different paths.)

I can fix it anyway. looks like a good time to roll out the reworked/retuned radios that I have here.

can you play your CDs in your DVD player?

If so... I have just fixed your car.

Check or money order will do fine :)

umm, i dont have the option with the screen, so i only have the CD player.

it does. I have a car in the workshop now with the same issue. I have to tear it down on monday and the 'fault' lies in the CD section (where it runs through 4 different paths.)

I can fix it anyway. looks like a good time to roll out the reworked/retuned radios that I have here.

umm ok, so this is definitely not a job in which you can tell me to "try this" and then 'try that' and it 'should be all good?'...because your in brisbane and im in sydney?....and what do u mean its a good time to roll out the radios?

nope - its all internal to the radio. I have a fellow that sent me one via reg post ( Hi Hillbilly) with the same issue. I'l going to do a service on that one whilst I have it.

in saying that I should probably knock up a chargeable jig (that way I get it back) so you have A/C and no radio.

if you want to pull the radio and send it to me (RADIO ONLY- NO PANEL!! ) I'll fix it for you.)

as for my comment I've been quietly working on 'new' radios for these both bose and non bose versions that tune correctly and display correctly - only issue is price as I literally rebuild the stacker at the same time. ( they are roughly a $750-800 radio.). these are the original radios recal'd and reworked.

Yep, have the same problem. Haven't fixed it yet, but it seems the cheapest solution is to work around it, with an Ipod adapter.

See post below:

http://www.skylinesaustralia.com/forums/Bo...mp;hl=prdreilly

thanks prdreilly, but i have a question, can you do the ipod connector thing on a NON-bose system?...i rmbr chris putting up a DIY for connecting an ipod...or was that on g35driver....but yeh can you?

bit of interesting info and I'm going to need chassis numbers to confirm.

the car have here has a PN2613E in it. those have an ENTIRELY different CD mech in them. this is in a may 2004 coupe.

the 2413/14 twins (bose/nonbose) have the same issue but its in a different spot. this one looks like a component issue.

those with the above problem can I grab chassis numbers please. that will tell me if yours is fixable or not.

Hi Chris,

i got the same issues i send you PM last week to get a quote

now my Car is 2004 Series 1 70th Anniversary coupe, Chassis number 6U9000CPV35507647

As for the Sydney guys...

here is a video on how to remove the head unit, so you can send to Chris....

http://www.infinitihelp.com/diy/gcoupe/pro...t_procedure.htm

I will be getting my DVD installed and Speaker Fixed Chris..just got to wait till 900 to arrive.... :P

bit of interesting info and I'm going to need chassis numbers to confirm.

the car have here has a PN2613E in it. those have an ENTIRELY different CD mech in them. this is in a may 2004 coupe.

the 2413/14 twins (bose/nonbose) have the same issue but its in a different spot. this one looks like a component issue.

those with the above problem can I grab chassis numbers please. that will tell me if yours is fixable or not.

Hi Chris,

My VIN is CPV35-508342.

I'm inclined to go for the IPOD option for cost reasons, but out of interest am happy for you to forward a quote.

Hi chris,

here is my Vin number : CVP35507357

could you also quote me on fixing the radio when sent to you?...and im also interested about that refurbished radio you are working on, just to clarify when you meant everything is displayed correctly does that also mean there is no need for the FM modulator anymore?

Hey Chris,

I haven't been using my Ipod for a while and this week when I started playing it in the car I noticed sound was only coming out of the right speakers. No sound from Left. Switched it back to CD and MD and its fine, both speakers work. Could it be a loose wiring caused when u pulled my center console apart few weeks back? This is in the blue car.

ok this is more FYI than anything else.

the issue seems to be with the PN2613/14 twins (13 being non bose.). unlike the 2413/14 versions (2001-2003) this thing is ENTIRELY different. that said if there is a CD mech issue in the 2613/14 - its a LOT easier to fix than the otehr one.

2413/14 - its a radio issue and not a CD one.

the dropped audio fault lies in the CD mech itself and requires a total strip of it. there are 4 boards in there and 3 places that the audio routes. on one there is usually a dry joint- its NOT a job for the beginner and unless you have a service manual I STRONGLY sugggest NOT attempting it.

Edited by Chris Rogers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, thumbsup from me. The distant shot of the bay just looks same-same as before.
    • Dad had a court case drag out with them from 1998 to 2004. He was in a not at fault accident, NRMA were the ones who covered the other person. They tried to blame his neck injuries on the fact he'd had an injury in 1981 on his extreme lower back where he slipped a single disc right near the bottom. Had been all cleared from that injury for years. This accident destroyed his shoulder, and f**ked a heap of discs in his neck, and he still has major problems with it to this day. Sarah's sister while on her L plates had a small Suzuki Alto, she had stopped to give way to an ambulance, and someone changed lanes behind her because there lane was also slowing, and rear ended her at 80km/h. (She had been stopped for a few seconds already too!). Car was completely f**kED. NRMA sent the vehicle around to 3 different workshops as they kept claiming "We believe it can be repaired, and not written off, we just need to find the correct workshop". It took 3 months, and a lot of arguing before they'd concede and wrote it and paid out. About two years later her sister had a Lancer, someone pulled out of a stop sign without stopping (in an 80 zone). Her sister swerved, hit the front of the other persons car (Instead of dead t-boning the drivers door), which ramped her Lancer, and made it roll multiple times down the road. It hit every panel on the way through. Her sister had slid her self out of the car, and remembers the ambos walking to the accident (They'd been sitting at a set of lights just down the road and witnessed it) and they were saying "Well, this ones going to be a fatality, no way you can walk away from that". Well, she did. And then NRMA sent two assessors out to look at the car, both of which wrote it off. They tried to send another assessor out, except a HUGE uproar was raised, and they FINALLY paid it out. That was on a car, that had damage to EVERY panel, you could see from 100m away the whole car was also twisted, roof bowed etc. Nah, we'll try get out of needing to payout on a $10,000 car... Her sister ended up with major shoulder reconstructive surgery being required, and was permanently limited in her ability to do her job as a nurse after that, as she can't (And was told before surgery too this would be guaranteed to happen) regain full strength in that shoulder. However, there was no choice to not have it, as she could barely use her arm, which was her dominant one, and was in near constant major pain. (And she's the type of person that would try and walk off a broken leg!) NRMA did the biggest run around on the personal injury side too for about 18 months, even to the point of trying to put 100% blame of the accident on Sarah's sister, even though the other driver admitted she didn't look, and didn't stop, and was charged by the police. Sarah used to have a Barina insured with them. It was a policy setup, paid all 12 months in advance. At the end of the 12 months, Sarah was living with me, I reviewed the renewal, it clearly stated "If you do nothing, your policy will cease on XYZ date". We did nothing, as we moved her insurance in with all of mine and I was with Shannons. We find out 10 months later, NRMA decided, because he DAD had a car insurance policy at the same address as what Sarah's mailing address was (Garaged address had been changed), that they'd put Sarah's (What should have been non existent policy) onto her Dad's month to month charges on his credit card. We had to jump through hoops, to get a refund. They didn't care that we actually found the letter that said "If you do nothing, your policy will cease" they made us prove we had NON COMPULSORY insurance else where before they'd issue the refund, and after they agreed to the refund, it still took another 6 weeks and 3 more phone calls for them to actually process it. They also had two insurance claims from storm damage, and they were an absolute cluster to get resolved as well (one vehicle, one house). Some how, up until about 3 years ago, her parents were still loyal to NRMA too, and we were like "How the hell are you so loyal to staying with them, when other places are so much cheaper, and they've f**ked you over every time you've ever had to make a claim?"
    • I got the four AN10 fitting welded up to the cam covers and started up making the head to sump breather/drain lines. The front passenger side cover I used a 45 up top and a 90 at the bottom into the stock VCT head drain spot (3/4" BPST to AN10 adapter) thats unused on the RB25DET NEO with some speedflow flame shield to protect it from the manifolds heat.   back passenger side was a 90 up top with some flame shield and 45 at the sump end. The rear drivers is 45 at both ends   the front drivers fitting is capped off for now but ready to go if i want to try moving the breathers around. I was told by the fabricator to leave all the welds raw for now to make sure there are no pin hole leaks. A lot of cleaning up, re bundling looms and degreasing to go as well as final assembly on the cam cover baffles. The first real test will be 28th March at a Circuit event. added complexity and more spots for leaks but overall looks relatively neat imo
    • Yeah i think the dash needs to come out. To get the loom or maybe just climate control and radio cluster. My mirrors are done i think the motors don’t work so well after flood haha i need the ac fan, you said you wanted to keep it for your 31 and interior loom not including boot. The wiper motor. I’m not sure how good the window surrounds are on the exterior on the pintara.  I will message you to get your bank details shortly 
    • Just another barrier put up to stop cars being modified. When we're all driving Chinese sewing machines, you won't want to modify it anyway, and you'll likely already have slashed your wrists and be locked up in a padded room for your own protection.
×
×
  • Create New...