Jump to content
SAU Community

When Some Fkr Does Graffiti On Your Bonnet

Munkyb0y
 Share

Recommended Posts

Munkyb0y Grand Master

Munkyb0y

Posted
Posted (edited)

Found my gf's lancer this morning, looking like this. The poor girl was in tears, and she's pretty damn tough!!!

090520091186.jpg

Yeah, they got it on there pretty fkn thick!!!

090520091187.jpg

So I thought, hmmm (after the urge to kill subsided), what can we do about this? Prepsol !!! (or any generic wax and grease remover)

A little bit of elbow grease, and a few clean cotton tshirts later.

090520091190.jpg

i think i got it on the camera lense :down:

090520091191.jpg

And finally ... its all gone. Even the caked on thick parts which i thought would never come off.

It could use a good buff and polish now. But it looks pretty damn good for 60 mins work.

090520091192.jpg

so now you know. if this happens to your car, grab some prepsol, poor it over the offender, and light them on fire.

or if you cant find them, just use it to clean the paint off

Edited by Munkyb0y
R33_Dude Rising Star

R33_Dude

Posted
Posted

Hmm thats a pretty good effort! This happenned to me once, I said screw it, cracked out the paint stripper and primer and got an uncle to spray paint it. Then I looked at the other panels and realised the bonnet looked better than the rest of the car.

It turned into a full body respray :s

Slow S13 Proficient

Slow S13

Posted
Posted

had this done too a while back.....

both comments are correct,

1. people who graffitti cars should be shot.

2. prepsol works a treat,

alternatively rather than shooting them you could follow them home and give there car a thin coat of brake fluid

Yo-Yo Grand Master

Yo-Yo

Posted
Posted

well done son top effort

Bet it earned you more than a few brownie points with the missus :)

Man I'm glad I got around to cleaning out the garage, used to park my car on the street/driveway, never again after seeing that

WET-25T Collaborator

WET-25T

Posted
Posted

That sucks for her. It doesnt matter where you park. About a month or two ago on a friday night/saturday morning i was parked on my front lawn at the front of my house. They egged my car. Out of 4 eggs only 2 hit.

Lesson learned was never park on the street or at the front of my house on weekends when all the sad people go cruising and causing trouble.

PM-R33 Grand Master

PM-R33

Posted
Posted
had this done too a while back.....

both comments are correct,

1. people who graffitti cars should be shot.

2. prepsol works a treat,

alternatively rather than shooting them you could follow them home, crack them in the back of the head with a shovel so they get knocked out, tie them to a chair and then cut their hands off with a hacksaw so they can never do it again (you can use a chainsaw if you prefer).

Fixed it for ya.

Munkyb0y Grand Master

Munkyb0y

Posted
  • Author
Posted

hahaha. ohhh man. it always boils down to a blow job doesnt it :D

and yeah if i had caught the kunts that did it, i would have used their faces to clean the paint off. then set them on fire.

dunno why, but i like the fire idea. seems somehow befitting

eeiko321 Experienced

eeiko321

Posted
Posted
had this done too a while back.....

both comments are correct,

1. people who graffitti cars should be shot.

2. prepsol works a treat,

alternatively rather than shooting them you could follow them home and give there car a thin coat of brake fluid

well luckily for this individual the bonnet had graffiti with spray can....

a mate of mine with a WRX STI... parked it at Telstra Stadium one time.....

and some Bogan REdneck Aussie...Scratched the bonnet with a Knife "f**king Leb"....... And the owner was actually Asian.....

eeiko321 Experienced

eeiko321

Posted
Posted
Alternatively rather than shooting them you could follow them home and give them a thin coat of hydrochloric acid.

Sorry, thought id add my own fix looks bout right now.

ive seen Hydrocloric acid done on a pain job.....

it doesnt do as much damage as you think it would....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      What brakes on R34 GTT(Europe)

      By MBS206 · Posted

      For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      Sorry, just assumed that talk of coloured pads meant EBC red/green/yellow/shit stuff. I don't know the DBA pads, but it's a reasonable bet that they will be OK. DBA make good stuff generally. Those 4000 series rotors I linked to are very good. I may well replace the RDA rotors I have with those when required.
    • joshuaho96
      Unpeeling the Orange

      By joshuaho96 · Posted

      The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      All I hear is ROADTRIP!
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
×
×
  • Create New...