Jump to content
SAU Community

Recommended Posts

Hey people,

Just wanted to get some peoples opinions on this, maybe find out what i would actually need to do in each case... I am currently putting money away for one of these ideas.

1. I have always wanted an R34 GTR. So in a few years i could just buy one straight out, possibly get it imported if the currency is behaving.

2. I am considering just doing a turbo conversion on my R34 GT, making it a GT+T. What parts would i need for this and how much am i looking at? I am assuming that after everything is done, including labor and parts and everything, it would cost around $10000???

3. Someone on here gave me the idea of doing a complete engine swap. Then i saw another member selling his GTR V-Spec II engine for $8800 or something like that. So my last idea is to buy a GTR engine, and put it in my GT. DO NOT KNOW ANYTHING about this sort of thing though lol, so would the engine fit, what problems am i looking at, who in Perth would do it for me, etc?

Any thoughts or suggestions would be appreciated,

Cheers :)

Link to comment
https://www.sau.com.au/forums/topic/269291-engine-swap-or-turbo-conversion/
Share on other sites

uuuusually to budget for a engine conversion you budget 2 to 3 times the cost of the engine to put it in.. but as this is a 26 replacing a 25 the engine part of the conversions shouldnt be too much or too hard, but all the supporting components will have to be brought up to spec, ie driveline, transmission, brakes etc..

for instance i got quoted $16,000 to put a s6 13btt in my mx5, the cost of the engine was $3,500.. and this was by the best workshop qualified to do this conversion.. the reason the price was soo much was because the only thing that was going to be mx5 at the end of the conversion was the shell..

You could build a engine for $8800 and it would be better then a Vspec engine

only advantage vspec has is the 24u block? (i think)

or you could buy a rb25 half cut for around $3500-4000 then swap it in should come well under 10k

as for buying a R34 GTR you can just save up but it would resale better then your current modded/converted R34

however if you want boost now a engine swap would be more sensible

hmmm engine swap would be teh way to go cause the GT+T would be high compression + turbo hmmm its ok i guess but wouldn't be able to pump high horse power....i did and engine swap mine was NA stuff started to break....e.g gear box etc so i hadd to replace everything sooner or later even did a 5 stud conversion and diff etc......lots fo money wasted if i had a choice i'd sell out and buy a GTR too :) hope that helps

Save your money and get the GT-R.

If your paying a workshop to do the whole lot, you'll be paying out the ass, It won't be the same as a GT-R and you'll have all the other issues with a modified car. Plus you wont get any of your money back when you eventually sell it.

A stock 34 GT-R wont make all the strange noises, will be easier to sell when youve finished with it and will generally be nicer.

My 2c.

have u considered selling ur gt and buying a gtt? ull save more money for sure. then have fun with the gtt while u save for a gtr. but if its the gtr motor u want for now, get many quotes and go the swap.

what i think would be the best idea is.. grab a gtr motor but keep ur rb25 motor around and when it comes to buying a gtr u can swap ur old rb25 back into the gt then sell it as a whole? then ull have ur sic gtr motor to wack into the new gtr. plus u can sell the stock gtr motor that comes with the car.. ya dig? just a thought

Edited by 1R34SON

Well if i sold the GT and bought a GTT, i would be spending about $10000 just to get the same mods i have on the GT... I might just leave it NA hey, see how much power i can get out of the RB25DE without wearing it out too much. Then get they GTR in a couple of years

You spent 10k in mods on a non-turbo? how? why?

Have a look at the Naturally Aspirated section of the forum, there are people in there who, for some unknown reason, love their N/A RB's.

My opinion, cut your losses and stop wasting money on the non-turbo.

Yeah, the fact is dude, not to rag on you or anything, but if you don't know how to do it yourself it's EXPENSIVE to get someone else to do it. Generally cos you always get these stupid little issues that slow things down, then you cant get a part, then your cars in their garage for a few weeks, *goes downhill*

Did you spend 10K on minor engine mods, stereo, kit and rims? Or was that 10K all engine work?

Sell the GT, get a GTT or save money now and get a GTR soonish. N/A is silly if its a skyline. Remember whatever mods you put into a car expect it to not increase the value of the car by much at all. aka Money Pit

You spent 10k in mods on a non-turbo? how? why?

Have a look at the Naturally Aspirated section of the forum, there are people in there who, for some unknown reason, love their N/A RB's.

My opinion, cut your losses and stop wasting money on the non-turbo.

listen to this man :D

how much is an R34 NA manual worth? 11-13kish?

sell it, buy R34 GT-T, few years buy GTR

best bet

I was going to convert my NA R33 to turbo, but realised it'd be cheaper to sell and get a GTSt.

Could have sold it for $9k, but unfortuately only got $8k for it because someone hit the side of it.

Bought my new 300hp Series 2 for $15k, only a $5k difference for better brakes, suspension, engine, more power, better body, and better interior.

Just save for the GTR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...