Jump to content
SAU Community

Blown Diff In My R33gts-t

Big beer
 Share

Recommended Posts

Big beer Rookie

Big beer

Posted
Posted

Hi guys

I have blown my standard diff and after a full gtr rear end for my gts-t as i break drive shafts regularly and diff has finally let go this time!

So i figured i would change the lot over!

Which model gtr rear end diff shafts etc would be best suited for my car, what changes have to be made to accomdate this set up any info will be much appreciated as i gotta get it runnin again for rego which is very soon!

cheers

Link to comment
https://www.sau.com.au/forums/topic/269479-blown-diff-in-my-r33gts-t/
Share on other sites
skylinekid Proficient

skylinekid

Posted
Posted (edited)

my understanding of it all is u need the entire arse end from rotor to rotor the bodies are the same so the suspension just bolts in. im not sure if the tailshafts flanges are the same tho sumthing i never really checked... ne one correct me if im wrong

just outta curiousity wat are u doing to break shafts and wat sorta power are u pushing

Edited by skylinekid
Big beer Rookie

Big beer

Posted
  • Author
Posted

OK so would it be beta to get the 33 gtr rear end? Its blown a couple at the dragest leavin the line it is manual so its expected to snap something! the lastest shaft and now the diff was done on the street only makin just over 400 bhp cant remember torque exactly tho but it makes a fair amount off that to!

Big beer Rookie

Big beer

Posted
  • Author
Posted

Ye its the stock gear box manual with a jim berry special heavy duty clutch!!!!

I purchased a r33 gtr rear end complete today all gettin ready to go in now but i do have a question if anyone knows about this conversion....

HOw do u go about connectin the tailshaft to the diff as the gtr diff is 5 bolt and the gts-t is 4???? can u change the flage off the gts-tdiff to the gtrdiff or what happens????

skylinekid Proficient

skylinekid

Posted
Posted

i think u can just change the flange im not 100% sure on that but there all r200 diffs sum just long snout and sum short but i couldnt tell ya... if ya capable enough to pull the cradle out on ur own then u should be capable enough to check if that can be changed over... let us know neways and let me know how that gtr rear end goes... ive seen cars up here with semi slick launching one fully stock arse end and never breaking a drivehshaft.... car had bout 500hp tho

Big beer Rookie

Big beer

Posted
  • Author
Posted

Ye im gonna find out shortly where i can change my original yoke(flange) over to the gtr one or not all depends on the spline inside if its the same or not or a can get a flange made up to suit the gtr diff but also fit my tailshaft depends on the length difference to the shaft!!! or i modify my tail shaft to fit the gtr diff few options i have will find out soon enough!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      WA PITS: Am I screwed?

      By Butters · Posted

      I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Degzy
      WA PITS: Am I screwed?

      By Degzy · Posted

      Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Ozdavroz
      One of these is not like the others 😂

      By Ozdavroz · Posted

      Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...