Jump to content
SAU Community

Wtb: R33 S1 Standard Shocks

mosquitocoils

By mosquitocoils,
in Classifieds

 Share

Recommended Posts

mosquitocoils Veteran

mosquitocoils

Posted
Posted

Hi guys, as the title says I'm chasing a set of shocks from a series 1 R33 GTS-T in good condition... no leaks etc.

Anyone with them or with info on where I can find some should PM me here or email me at [email protected].

Let me know condition, price, and location and I'll consider it... cheers guys.

Link to comment
https://www.sau.com.au/forums/topic/269527-wtb-r33-s1-standard-shocks/
Share on other sites
maniekan Collaborator

maniekan

Posted
Posted

hey im not selling shocks but im selling brand new springs for a series 1 R33 king springs if your interested, might as well put them on if your putting new shocks in.

heres the link if your interested im on the gold coast, postage is cheap like $10

http://cgi.ebay.com.au/Brand-New-R33-skyli...93%3A1|294%3A50

Copy that into your address bar

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MidnightR32
      RB20DET lean on cold start

      By MidnightR32 · Posted

      I have one and it was at ~43.5PSI.
    • GTSBoy
      RB20DET lean on cold start

      By GTSBoy · Posted

      Put a pressure gauge on the fuel rail.
    • MidnightR32
      RB20DET lean on cold start

      By MidnightR32 · Posted

      I've uploaded logs / the current map to Gdrive if anyone has any ideas. https://drive.google.com/drive/folders/1FPnr22Z-EilG7tYdHSi0Qb07P2jfFLKV?usp=sharing
    • luke gtr
      Spotted on the street....

      By luke gtr · Posted

    • MidnightR32
      RB20DET lean on cold start

      By MidnightR32 · Posted

      I'm running a Haltech Platinum Pro with the stock map for the RB20DET + tweaks for my build. When I started it this morning, the IAT was at 32F/0C (Outside temp was ~42F) and the AFRs went off the scale for my AEM gauge. I let it run for ~30 seconds then turned it off. I then did a smoke test, by hooking into a vacuum line directly behind the throttle body, and confirmed there was no leaks ( i let the smoke tester run for ~5 minutes / confirmed it was generating smoke before hand ). I then started the car again, after fixing a power steering leak.... and it seemed to be happy for ~30 seconds (was at ~11/12), but then seemingly shot back up to ~18 again. I then let the car run for a few minutes, thinking this was just cold start related, but the AFRs never came back down. I didn't let the car fully warm up, so maybe this makes sense, but I'm not sure what to do? The AFRs, when I last ran it, were normal, but because of personal reasons I haven't been able to break in the car. It was rebuilt last year. Engine / Mod list: Supertec pistons Spool rods Kelford 270 cams and Springs Stock crank Deatschwerks 900cc injectors Walbro 255 (Wired directly to the battery relocated in the trunk) NKG Audi R8 Coil packs + Conversion Harnesses from Wiring Specialties Holset HY35 turbo Haltech Platinum Pro ECU Haltech boost controller (wired in for high boost RB25 Neo transmission + needed bits for the speedo to work  
×
×
  • Create New...