Jump to content
SAU Community

[tas] 17" Work Equip - 5 X 114.3 Approximately 40+ Offset

twr7cx
 Share

Recommended Posts

twr7cx Contributor

twr7cx

Posted
Posted

Item: 4 x 17" Work Equip 3 piece wheels (this is the model that Starcorp Racing make replicas of, but these are the real deal)

Location: Eastern Shore of Hobart, Tasmania.

Website: Check out http://www.workwheelsusa.com/category.php?category=43 for more information.

Item Condition: Used, but in good condition, no buckles or dents or anything. Some gutter rash.

Reason for Selling: They are for sale as I only recently purchased them to fit to an old Valiant, however even with 35mm hub adapters there's rubbing issues, so these arn't going to do the job - I've since found a set of Simmons from another Valiant and am selling these to raise the funds for the Simmons. I also tried on my Falcon, but the wheels won't fit over the 343mm front brake rotors and 4 piston AP Racing callipers.

Price and Payment Conditions: Asking around $1,000.00, but open to offers.

Extra Info: They are 5 x 114.3 PCD which is the Falcon, Skyline etc. stud pattern. The offset is somewhere around 40+ which is correct for these type of vehicles too (you can use the Wheel Wizard on Tempe Tyres website to work out what your vehicles offset and PCD is if your not sure - http://www.tempetyres.com.au/wheel_wizard.asp ). Front 2 must be around 8" wide as they have 235/45 R17 tyres fitted, while the rear 2 have 255/40 R17 wider tyres. Tyres are in good condition.

Pictures:

p5110140.jpg

w640.png

p5110138.jpg

w640.png

p5110137.jpg

w640.png

p5110136.jpg

w640.png

Contact Details: Reply here, PM me or 0439 815 079.

twr7cx Contributor

twr7cx

Posted
  • Author
Posted
Arhhh nice wheels shame bout the offset.

Thank you for that valuable input. Not sure why you don't like the offset. 40+ is what AU onwards Falcons, Magnas, S14 and S15 Nissans, 350ZX, some of the Skylines (e.g. R32,33,34 GTS-T), some RX7's etc. use.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Turn signal wiring question

      By Dose Pipe Sutututu · Posted

      Convert to dual filament bulb   FWIW, it will look odd - I dare say a bit dumb as it looks like your flasher relay has shit the bed.
    • GTSBoy
      Possible swap on R34 RB20DE NEO?

      By GTSBoy · Posted

      If the RB20 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • GTSBoy
      Turn signal wiring question

      By GTSBoy · Posted

      Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
×
×
  • Create New...