Jump to content
SAU Community

Recommended Posts

same clip hosted on another site, just an experiment.

<iframe src="http://player.vimeo.com/video/26498836?title=0&byline=0&portrait=0&autoplay=1" width="398" height="224" frameborder="0"></iframe>

Ok, this is the code to embed th clip, what am I doing wrong???

Edited by Noddy

MG Car CLub let you through scrutineering with bonnet vents? What class were you in?

They threw the book at me for that last year. As I drove into the pits in the morning, a scrutineer followed me to my pit and accosted me about the vents before I even got out of the car!

Edited by hrd-hr30

^^^^^^ That kinda shit makes me see red.

It's happened a few times now, and each time it has literally taken all my willpower to stop from ripping their head off and shitting down their neck.

Maybe I have issues, but I like to be made felt welcome when I pay to be at an event. If I'm outside the rules, then sure, come and talk to me, but don't yell and scream at me in front of a crowd.

Ok, lest see if this works...

This is what I make when I get way too drunk and cant sleep, some times. I wake up some time later and with hand in head, mutter those famous words, "Never Again"

Harry, I've had that bonnet on the car for....7 years. Never had 1 scrutiner question it.

http://www.vimeo.com/26529089

Edited by Noddy
  • 2 weeks later...

Just got done with doing my first track day at Zandvoort, Holland. Good track, with an EPIC back section where you are 6th going over a blind crext into a mega fast 5th right hander roller coaster. This section of the track makes it the goods :worship:

I had booked an R300, which has 40hp more then the Superlight in the vid, better suspension and roll cage...but a guy binned it at Spa on Tuesday on me...and the spare R300 they brought on the trip from UK punctured its fuel tank at Spa :(

Had to buy a GoPro the day before the event and they dont like beign in open top cars. took a lot of effort to get the wind noise as low as in the vid (which is still pretty bad)

fuggin awesome, just went to visit zandvoort a couple of weeks ago with my mate during the week, just epic to see the undulation, mega jelly of you getting to drive it man!

sweet vid russ, car looks freakin fun to drive. nice steer job

Edited by scooby36

Finally have some footage I feel like sharing. This was done at MDTC in Marulan, NSW. Tight little track but a whole lotta fun.

Before you say anything, I don't know why I started driving one handed later in the day. Was doing alright earlier. For some reason started holding on to the gear lever like a 3yr holds his... well you know. I guess I must have scared myself into regression :teehee:

Thanks for the tips on dashware - great little piece of software. Way better than RaceChrono2AVI for this kind of work. Data was collected using QStarz lap timer. Strange was 0.1 difference between the laptimer and Dashware.

<br /> Data was collected using QStarz lap timer.  Strange was 0.1 difference between the laptimer and Dashware.<br />
<br /><br /><br />

im stoked we got you using dashware Eric. very easy to counter any sync issues too.

Perhaps you can build some GTR style gauges to use? :)

  • 4 weeks later...

Hey Guys

This is my vid from my outing at Lakeside Park on tuesday. It was my first time on semi's and my second sprint at LS, and my first time breaking the 60 second barrier as well. Thought I'd post up here to get some pointers from the guru's as to where I could cut some further time out of my laps and any other hints you guys have to offer as well :)

Thanks Guys :)

good one Ian. Welcome to the sub 60 club! I like the look over at the wall after that warm-up oops! lol

these would be my tips:

1. Carousell - not wide enough in the middle of the corner to get a good exit which is important for the back 'straight'.

2. Turning in a bit too early for the bridge, which is why you end up wide right out at the edge of the road.

3. Hungry - use all the road. you're coming in far too tight. Should be over near the gaurd rail before you turn in.

4. Eastern Loop. Looks like you're coming in too hot and just washing out to no-man's land. Fast line is right the way round the inside.

5. might be turning in a bit too early on Shell corner too (onto the front straight), but that's not a massive problem with the widened front straight.

watch scooby36's vids for a masterclass in Lakeside's lines.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi everyone, just looking to see what's available in the GTR seat options, testing the waters on what's available. Wanting a driver's seat to replace my old school OG jap race seat, going to re-register the car so need a factory seat. Prices currently seem to go from $300 to $2k for a driver's seat. What's options are there, that's good condition and actually a realistic price? Located Brisbane. Thanks
    • Are these a plug and play setup, and do they need a tune, like a haltech ecu etc? Thanks
    • Nice work on the paint. Those 3 studs are long as. 
    • Hi everyone, still chasing a bunch of this stuff. Thanks
    • Been over 2 months since I have done anything on the S15 and had a day off today so got stuck into mounting the radiator and intercooler. I ended up using factory bottom mounts as bolted in and I did order some gktech top brackets but didn't work with the PWR radiator so made up some with aluminium flat bar. Spent way to long on them but pretty happy how they are. Next job was the intercooler. Used some more aluminium flat bar and did the bottom mounts first. Top was easy as just one long piece and 2 90 degree coming off rad support and welded them on. The bumper support required some notching to let the outlets sit where I want so will add some reinforcement later to strengthen it. I have also bought ecu and waiting for it to arrive. Went with a Link g4x Xtreme but will be adding a ptmotorsport expander to add a few extra inputs over CAN. Went through a few different configurations on pclink to get what I want to allow future expansion for sensors and gearbox upgrades. Ordered gktech rear arms but looking at the hardrace lower control arms to have some extra adjustment too will see how the alignment looks after first setup. Got 2 more weeks of work before shut down and will have almost 4 weeks to work on this so planning on hopefully firing up mid January.   Also bought a 2015 brz with a heap of good gear, did noosa hill climb a month back. Owned it for 3 days changed alignment and sent it. Finished the weekend 2nd in class and only .3 off the 180sx best time last year. MCA Red coilovers, gktech rear lca, bolt on lock kit and tie rods, whiteline toe arms, cusco 1.5way diff and 4.5 ratio, endless brake pads, headers, exhaust, perrin intake and e85 tune. Electronic steering adjustment, nankang crs with koya wheels 17x9 +35. Have bought rear traction arm and relocation kit, extended studs and v3 tie rod kit. Planning on also getting flex tune as lucky to get 300km a tank with e85 and short ratio. Car is a heap of fun to drive and super easy to work on. AC in the line up at Noosa was mint in 35degree weather.
×
×
  • Create New...