Jump to content
SAU Community

What Will Win


Recommended Posts

I care, competitive fun between two mates.

Beemer is nice but has over twice the km and only 2 doors. Cost a fortune to fix and more expensive to buy.

You got the extra two doors at the rear to weigh you down. :(

Link to comment
Share on other sites

Hehe!

Lets just say, don't go easy on him...

Which version M3 has you mate got?

3.0L Inline 6, 24 valves.

155 mph (249 km/h) (electronically limited)

U.S. 179 kW

0-100 km/h - 5.6 sec

3.2L Inline 6, 24 valves.

155 mph (249 km/h) (electronically limited)

U.S. 179 kW

0-100 km/h - 5.5 sec

And the car weights abour 1460 kg's.

You got a Skyline R34 GT-T.

2.5L Inline 6 Turbo, 24 valves, 206 kW's and it weights about 1410 kg's.

Give a decent launch to get the turbo spooling and full throttle all the way.

DONE AT A RACE TRACK!

NO STREET RACING!

Ok you can give it a quick squirt at the lights... Jokes

Thank you :)

Link to comment
Share on other sites

Hehe!

Lets just say, don't go easy on him...

Which version M3 has you mate got?

3.0L Inline 6, 24 valves.

155 mph (249 km/h) (electronically limited)

U.S. 179 kW

0-100 km/h - 5.6 sec

3.2L Inline 6, 24 valves.

155 mph (249 km/h) (electronically limited)

U.S. 179 kW

0-100 km/h - 5.5 sec

And the car weights abour 1460 kg's.

You got a Skyline R34 GT-T.

2.5L Inline 6 Turbo, 24 valves, 206 kW's and it weights about 1410 kg's.

Give a decent launch to get the turbo spooling and full throttle all the way.

DONE AT A RACE TRACK!

NO STREET RACING!

Ok you can give it a quick squirt at the lights... Jokes

Thank you :D

Wish i found that info its good.

Well. I beat him.

rolling start at 30 and 70 i won numerous times.

Then a few off the line. Lets just say even at top end he was sitting at my mirrors. So not much between us. Seemed that my launch and rolling start (thanks boost) gave me the advantage, but at the end of hs gears he would catch, but not enough to get past me.

Its the 3 litre version e36.

If he could get a good launch down i believe we would be dead even. When i went a little easier and just took off without launching (him with wheel spin) we were side by side. Ended up agreeing despite me being ahead marginally that the cars were too close to call a real winner.

His car is seldom driven hard while mine is driven a little more enthusiastically but by no means thrashed.

And yes, track.

Edited by pos513
Link to comment
Share on other sites

Wish i found that info its good.

Well. I beat him.

rolling start at 30 and 70 i won numerous times.

Then a few off the line. Lets just say even at top end he was sitting at my mirrors. So not much between us. Seemed that my launch and rolling start (thanks boost) gave me the advantage, but at the end of hs gears he would catch, but not enough to get past me.

Its the 3 litre version e36.

If he could get a good launch down i believe we would be dead even. When i went a little easier and just took off without launching (him with wheel spin) we were side by side. Ended up agreeing despite me being ahead marginally that the cars were too close to call a real winner.

His car is seldom driven hard while mine is driven a little more enthusiastically but by no means thrashed.

And yes, track.

Hehe!

Sounds like you did well.

As much as I like the BMW E36 M3, I still prefer turbo(s).

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Oooohhh man did not bloody know that, that's amazing thanks heaps for sharing mate, bookmarked it!
    • In case you haven't come across it, there's also https://nissan.epc-data.com/ Go by VIN or drill down into your specific model and year and it'll have references for pretty much all the OEM parts. In very similar diagrams. Linked against amayama as well for ordering. Though they can be a bit slow and can be better to search around to get the parts locally.
    • Just in case anyone finds this in the future, here's a diagram sent to me by Nissan to identify these hoses. I ended up finding them through EFI Solutions though because Nissan reckons they need to order it from Japan, with a total cost of approx $110 inc. So it as cheaper with EFI anyway. https://www.efisolutions.com.au/blow-by-hose-rb25det-r33-wc34-c34-c35 https://www.efisolutions.com.au/blow-by-rocker-cover-hose-rb25-r33-wc34-c34-c35  
    • This is an older post of mine but I just thought I should update it and explain what the problem was. Long story short the friction plates were below their service limit. New they are around 4mm, and service limit is (according to OSG) 3.5mm In addition the crank seal gasket wasn't sealing 100% anymore and that led to an oily clutch. Not sure what came first and why the clutch was worn after just 10,000km .. but all good now. OSG refresh kit via Nengun            
    • My r34 GTT auto transmission is slowly letting go, slipping every now and again, tiptronic deciding to not keep it in 1st / 2nd when flooring it, taking longer to shift so I’m going going flush it and replace the filter and hope it lasts a bit longer.    I’ve got 10L of Penrite ATF FS at home and I’m going to use it for it unless ye completely recommend against it.  Penrite list it as compatible. i understand I should be using Castro Transzmax however it’s quite expensive and I already have 10L of the ATF fs. Has anyone here used atf fs for there got or heard of anyone? Or am I silly for even considering anything other then Castrol  Thanks for your advice 
×
×
  • Create New...