Jump to content
SAU Community

Recommended Posts

Guys,

i did a search and none of these came up..i guess...heh

In my never ending quest for more GO, ive got some questions abt turbocharging...

1) in regards to the RB25DE and RB25DET, what are the differences? Am told that the difference with the RB25DE is that the cams have higher lift. What is this? And that the pistons are different. Thats it. If u change the pistons, then it basically is fine then cause the Compression will go down if u change to turbo pistons or is there more than that i shd be aware of?

2) What else in the car differs? besides brakes and gearbox?

3) what kinda power is the Non-turbo gearbox good for?

4) presumably, i slap in a r33 GTS-t ecu, std turbo and manifold. And then an o2 sensor(dont know why but someone told me i shd) and a GTS-t AFM(or are they already the same in the non turbo) i shd be able to run maybe 0.3 bar? with my present 10.1 compression ratio?

5) presumably i buy the GTS-t ecu ahead of all the parts above and put it in, will my car still be able to run with the GTS-t maps?

thanks...and nheh...my knowledge base is limited and based on mainly what i hear around...nth expert wise so...if ne of the above are wrong, i would be more than happy if u wud correct me...thats why i posted...

hehehehe

thanks in advance guys

Link to comment
https://www.sau.com.au/forums/topic/27020-r33-gtss-and-gts-ts/
Share on other sites

better off getting a gts-t. furthermore the price difference is not much.

if you buy a gts, you'd be kicking yourself for not buying a gtst. the mods you have to put on to be on par with a gtst is more than the difference you pay for a gtst. trust me, the gtst would make you smile for quite long in standard form.

The DET engine has oil squirters in the piston bores, which I think the DE doesn't have. If so, you will probably find yourself with a variety of piston overheating problems, which you won't even know about until something ****s up bigtime. ie, it's not just that your coolant temperature gauge will read higher than if you didn't have the squirters.

If you really want to do this, the best way (seriously) is to buy a GTS-t front-cut, transplant the whole front end including gearbox and brakes into your car, then sell all the leftover bits to recoup a few hundred bucks.

A front cut can be had for around $2k I believe, which I think is a bargain compared to buying all the necessary bits separately and then shoehorning them in. The process of swapping everything over should also be a lot simpler than modifying your existing engine.

read the above :( It can be done, and the engine swap is fairly straight forward and the best option if you are so attached to your GTS and really MUST do it. A guy i know has done it to his GTS, seems to have worked ok.

Don't forget the big difficulty of registering, insuring the car and the like if its not fully engineered. Its fine to do yourself, but when you go to sell it you will probably have trouble convincing somebody to buy it. Or in a serious accident you may well be royally *f'ed* when the car is inspected.

will also still only have the smaller brakes of the GTS however, and the diff may be slightly weaker(?).

For $3-4k difference between a reasonable GTS and factory GTS-T to be honest i'd just be selling and trying to pick up a stock GTS-T for around $16k

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've sent JaseR33 a private message in the hope he gets an email and contacts you
    • I have seen a case where the starter motor shorting against the casing caused a massive voltage drop + so much EMI that it caused all the sensors to spew garbage data at the ECU. Test the battery to make sure it has acceptable CCA/capacity first, I have gotten "brand new" batteries before that couldn't even power a 10W light bulb without dying probably because it sat in a warehouse too long without being charged. Only easy way to diagnose this 100% is put an oscilloscope on the battery and also look at key sensors to see if there's any clues.
    • There's a bunch of smaller shops that don't quite attract Singer money but are still hiring from that same pool of labor. Those are the body shops that you go to when you can't afford a Singer, but your old Porsche needs some serious bodywork. You can't exactly take those cars to the usual insurance body shops. When I say restomod, I mean they'll do something other than 100% OEM/OEM-equivalent aftermarket parts R&R. In the Porsche world this would be stuff like taking a 50k 964, doing a bunch of deferred maintenance/unwinding the nightmares the previous owners did to the car because a lot of people that own these cars tended to be penny wise, pound foolish types, then maybe some relatively simple off the shelf modifications to things like suspension, transmission, engine, headlights, etc. and you've spent 130k USD. When even the worst houses in the poor neighborhoods are worth 1M USD and the nice houses in wealthy neighborhoods are worth 3-10M USD suddenly 130k spent on a 50k car seems cheap.
    • Hoping to get a few ideas to help troubleshoot this issue, I'll try to keep it short.  A mate popped the motor in his 2018 LDV T60 with the 2.8 turbo diesel motor. He swapped it and I was his phone a friend when he got stuck.  The new motor is in, however it won't fire. The battery is literally brand new, when you crank it the volts very quickly (say 2 seconds of cranking) drop to 8 volts and the engine stops turning over. Watching the belts, I'd say they move about 5cm before coming to a stop. We put a booster pack on, no change.  The only potential issue I'm aware of is, when we pulled the motor the grounding strap was still attached. The strap copped a thrashing before we realised what was going on. It looks okay-ish but it's going to be replaced to rule it out.  The main challenge is, I wasn't there for 90% of the work. This is his first time doing any major work on a car and he was learning as he was going. He thinks everything has been put back together properly, however I'm not entirely confident that this is the case.  It would be good to get some ideas about what else to check. The car isn't spitting any codes so that doesn't help.  I've attached a photo, because why not lol.   
    • I mean an N1 came with a minimal paint thickness compared to dealer models. It’s probably had a ton of vinyls and stuff possible a race paintjob or two over the years. you don’t buy an N1 for its stunning good looks or comfort 🤣 you buy it to send it and measure how much air you can get on the hill at Bathurst
×
×
  • Create New...