09GTR Posted June 29, 2009 Author Share Posted June 29, 2009 Victory at last!I managed to launch twice cleanly without LC by stabbing the gas very quickly, revs shot up to 2850RPM and 2950RPM, let go of the brakes and got 3.9 sec both times! 0-20 m 2.254 and 100m 5.278 sec. I then managed to rev to 3000RPM, let go of the brakes, revs shot up to 3200RPM and got a neat 4.0 sec. Lastly, stalled at 2500RPM and it went back to 4.4 sec. So it seems that the launch "sweet spot" is somewhere between 2850 and 2950RPM. Auto trans with 3 "R" settings. Shell-V-Power and K & N Filter back in. If the revs don't go up to 2900-3000RPM immediately, there is no point waiting : the clutches just start slipping as the revs try to slowly creep up from 2000RPM. Disengage back to neutral and try again by stomping on the gas very quickly. Thanks for the advice mate! I am glad to hear it! Still reckon there should be a 3.7 or 3.8 lurking there somewhere.... Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-4686147 Share on other sites More sharing options...
genosse Posted July 2, 2009 Share Posted July 2, 2009 I recorded the following 0 - 100kph times using a GTech pro RR device (settings RRR):Automatic mode with launch control 3.764 seconds -flat surface Automatic mode with no launch control 3.900 - flat surface Manual Mode with launch control 3.820 -flat surface Manual mode without launch 4.064 - uphill This is for an ADM, premium, 22 degrees. Tests were conducted at the track. When the HKS 570 kit and Cobb custom tune (Croydon racing developments) are installed next week, I will post the enhanced 0- 100kph numbers for comparison purposes. NICE!! Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-4692410 Share on other sites More sharing options...
Gibbo_R35 Posted July 2, 2009 Share Posted July 2, 2009 Victory at last!I managed to launch twice cleanly without LC by stabbing the gas very quickly, revs shot up to 2850RPM and 2950RPM, let go of the brakes and got 3.9 sec both times! 0-20 m 2.254 and 100m 5.278 sec. I then managed to rev to 3000RPM, let go of the brakes, revs shot up to 3200RPM and got a neat 4.0 sec. Lastly, stalled at 2500RPM and it went back to 4.4 sec. So it seems that the launch "sweet spot" is somewhere between 2850 and 2950RPM. Auto trans with 3 "R" settings. Shell-V-Power and K & N Filter back in. If the revs don't go up to 2900-3000RPM immediately, there is no point waiting : the clutches just start slipping as the revs try to slowly creep up from 2000RPM. Disengage back to neutral and try again by stomping on the gas very quickly. Thanks for the advice mate! Someone has to show me this method....I am getting bogged at 2,000revs. Are you guys holding the brake pedal, stomping the gas and waiting for the revs to build, or are you one the brakes, stomp the gas and release just as the revs climb towards the 2,700 mark. I just seem to have the car fighting the brakes, there is no progression past 2000 revs. Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-4693287 Share on other sites More sharing options...
GT-Ricer Posted July 3, 2009 Share Posted July 3, 2009 (edited) Someone has to show me this method....I am getting bogged at 2,000revs.Are you guys holding the brake pedal, stomping the gas and waiting for the revs to build, or are you one the brakes, stomp the gas and release just as the revs climb towards the 2,700 mark. I just seem to have the car fighting the brakes, there is no progression past 2000 revs. It is pretty tricky and does not work 100% of the time.It took me quite a few tries to figure out what the other guys were trying to explain. 1. Press the brake hard with your left foot and hold. 2. Stab the accelerator as fast as you can: the ECU reads that speed of the gas pedal movement to the floor. You should get 2800-3000RPM in 70% of attempts. If you press the gas pedal just a bit slower, it may seem fast enough, but your revs will only climb to 2000-2200RPM and stall. 3. If you get the 2800-3000RPM at the first attempt, let go of the brake before the revs stall at the limit and hold on to the steering wheel! You should hopefully record 0-100 in under 4 sec. If the engine stalls at around 2000-2200RPM, you won't get any lower than 4.1-4.3 sec. The 0.2-03 sec difference is in the first 20m. Good luck. Edited July 3, 2009 by GT-Ricer Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-4693696 Share on other sites More sharing options...
Gibbo_R35 Posted July 3, 2009 Share Posted July 3, 2009 Cheers...will let you know. Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-4694019 Share on other sites More sharing options...
666DAN Posted July 15, 2009 Share Posted July 15, 2009 On a similar note you're always at the mercy of the dealer playing with the tune. Of note was my mates Typhoon last week that went in for the subwoofer to get fixed....they took it on themselves to reflash his ECU and wiped the tune that was on there, he went to pick it up and it was blowing smoke rings as the car had larger injectors, fuel pump etc etc. All worked out in the end as on sale they had agreed to give a full 5 year FPV warranty on the modded rom and all accessories. They paid to get it retuned Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-4715484 Share on other sites More sharing options...
MISS32 Posted July 15, 2009 Share Posted July 15, 2009 sweet Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-4716144 Share on other sites More sharing options...
JDM-35 Posted August 12, 2009 Share Posted August 12, 2009 Maybe a little off topic, but has anyone done any 0-400m times yet? Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-4764797 Share on other sites More sharing options...
GT-Ricer Posted August 13, 2009 Share Posted August 13, 2009 Maybe a little off topic, but has anyone done any 0-400m times yet? You did...c'mon, don't be bashful, tell them what you got... Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-4766626 Share on other sites More sharing options...
JDM-35 Posted August 14, 2009 Share Posted August 14, 2009 Did 11.3@123mph Stock except for Willall Y-pipe and stage 1 generic flash Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-4767313 Share on other sites More sharing options...
HEKT1K Posted August 14, 2009 Share Posted August 14, 2009 Did 11.3@123mph Stock except for Willall Y-pipe and stage 1 generic flash amazing result! you must be stoked... well done Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-4768006 Share on other sites More sharing options...
caraddict Posted April 29, 2010 Share Posted April 29, 2010 I recorded the following 0 - 100kph times using a GTech pro RR device (settings RRR):Automatic mode with launch control 3.764 seconds -flat surface Automatic mode with no launch control 3.900 - flat surface Manual Mode with launch control 3.820 -flat surface Manual mode without launch 4.064 - uphill This is for an ADM, premium, 22 degrees. Tests were conducted at the track. When the HKS 570 kit and Cobb custom tune (Croydon racing developments) are installed next week, I will post the enhanced 0- 100kph numbers for comparison purposes. White R35 GTR completely stock 0-100KMH 3.5SEC Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-5205896 Share on other sites More sharing options...
domino_z Posted May 17, 2010 Share Posted May 17, 2010 (edited) The first second and a half after launch it feels like stretching an elastic band as the boost builds up and then all hell breaks loose. I am wondering if the brand new clutches need to bed in more because it feels very laggy from a dig, until a second or two after launch when it goes berserk. i noticed this too on all the youtube vids ive been watching - there is this initial pause, the revs seem to rise up to 2000, pause there momentarily, then the car starts accelerating, very strange and only can assume its VDC cutting the power ? my car only has 380km on the clock atm, but i will be giving it a shot once i get more kms on it even after mod'd Edited May 17, 2010 by domino_z Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-5237732 Share on other sites More sharing options...
domino_z Posted May 17, 2010 Share Posted May 17, 2010 The JDM cars are getting 3.3 seconds because they are running 15 psi compared to the ADM 12 psi. 4 days into ownership and i have ALOT to learn care to fill me in, or point me to another thread Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-5237736 Share on other sites More sharing options...
LSX-438 Posted May 17, 2010 Share Posted May 17, 2010 I dunno about the JDM vs ADM 12psi vs 15psi thing. Anyway here is a recent 0~100km/hr run in my ADM (four wheels spinning mind you) mods are catback + e85 tune Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-5237768 Share on other sites More sharing options...
N1GTR Posted May 17, 2010 Share Posted May 17, 2010 What did you use to log those numbers? Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-5237922 Share on other sites More sharing options...
LSX-438 Posted May 17, 2010 Share Posted May 17, 2010 What did you use to log those numbers? Driftbox. It's usually quite accurate, compared to the dorian system around a circuit anyway. Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-5238116 Share on other sites More sharing options...
1q2w3e4r Posted May 17, 2010 Share Posted May 17, 2010 4 days into ownership and i have ALOT to learn care to fill me in, or point me to another thread Made the leap to the R35 aye Sam? What are your thoughts on it? Be pretty keen to hear your impressions on it and real world running costs further down the track. Gotta post pics up! Especially on e46.f! Still got the 7/2? Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-5238439 Share on other sites More sharing options...
N1GTR Posted May 17, 2010 Share Posted May 17, 2010 Driftbox. It's usually quite accurate, compared to the dorian system around a circuit anyway. Thanks Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-5238446 Share on other sites More sharing options...
Kujotk Posted May 18, 2010 Share Posted May 18, 2010 I dunno about the JDM vs ADM 12psi vs 15psi thing.Anyway here is a recent 0~100km/hr run in my ADM (four wheels spinning mind you) mods are catback + e85 tune Good work mate, 3.16 is a truely epic time for such minimal mods. Next thing.... do you throw on some drag tyres on the car and risk stripping the box for a better time or is that a good enough 0-100 for you? Is there any info of the higher speeds? Link to comment https://www.sau.com.au/forums/topic/270400-0-100kph-times/page/4/#findComment-5239522 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now