Jump to content
SAU Community

Running In Engines

baron25
 Share

Recommended Posts

baron25 Proficient

baron25

Posted
Posted

So a friend of mine just bought herself a brand new RAV4, and will have it for a total of three weeks before she was planning on driving it to SA from Melbourne (1500km round trip). Just a quick question, if it's new new, and she would still need to run in the engine properly, bed in the brakes etc, is it a good idea to tow a boat almost to Adelaide or not?

Link to comment
https://www.sau.com.au/forums/topic/270630-running-in-engines/
Share on other sites
Benzino33 Experienced

Benzino33

Posted
Posted
So a friend of mine just bought herself a brand new RAV4, and will have it for a total of three weeks before she was planning on driving it to SA from Melbourne (1500km round trip). Just a quick question, if it's new new, and she would still need to run in the engine properly, bed in the brakes etc, is it a good idea to tow a boat almost to Adelaide or not?

Do u mean is it a good idea to tow a boat with the new car? And yes, if it is a brand spankin new engine u will need to rin it in properly, dont think towing should be a problem, as you wont be revving the crap out of it

Benzino33 Experienced

Benzino33

Posted
Posted

hmm ok, welll wen I did mine in I had to pretty much stay off boost for about 1000km's. I did I didnt baby it too much though, just drove long distances and in different conditions

baron25 Proficient

baron25

Posted
  • Author
Posted
Do u mean is it a good idea to tow a boat with the new car? And yes, if it is a brand spankin new engine u will need to rin it in properly, dont think towing should be a problem, as you wont be revving the crap out of it

Yeah, that's what i mean. She'll still be running in the engine at that stage, I was unsure it towing a boat, motors and all our race gear across the country would be a good idea on an un-run motor.

Benzino33 Experienced

Benzino33

Posted
Posted
Yeah, that's what i mean. She'll still be running in the engine at that stage, I was unsure it towing a boat, motors and all our race gear across the country would be a good idea on an un-run motor.

nah dnt think its a bad idea, its jus a bit of extra weight,, wont mess the engine up

baron25 Proficient

baron25

Posted
  • Author
Posted

If I had an owners manual for sure, but seeing as it came out of a conversation we had the other night, and she's not scheduled to take delivery of the car (and by extension, the aforementioned owners manual) for another week. I thought it might be a good idea to ask around here, figuring someone would have an idea on the answer.

br3ndan Mentor

br3ndan

Posted
Posted
Most cars off the shelf are already run in at factory.

Different story for those who do a re-build - but brand new generally don't need running in.

Thats my take on it.

It was advised when we got the 300c srt 8 that it didnt need running it, as it was run in from factory. =)

Benzino33 Experienced

Benzino33

Posted
Posted
lol! yeah do a farken burnout carnt!

Umm well a guy i know with a recently rebuilt RB25DET NEO motor is having to run it at a 4000rpm limiter and keep off boost for the first 2000km?

yeah thats what my rebuilder tols me to do,,but for 1000kms till the first service. was the most boring week ever

BezerkR32 Veteran

BezerkR32

Posted
Posted

everybody has mixed opinions on this, factory engines are pre-run in so just get into it. Im also a believer of the harder you drive it the better it performs as mentioned earlier.

As for running in built engines, this is how i ran in mine.

yeah thats what my rebuilder tols me to do,,but for 1000kms till the first service. was the most boring week ever

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Rb26 iron block limit

      By GTSBoy · Posted

      Which is why I didn't mention that hardness testing, and specifically mentioned the bore and deck thickness testing. Yeah, not really. The bore temperature will be a lot more even around the top half inch or so, where the material distribution is dominated by the deck, and which is the only place where the bore surface temperature heating any gas in the cylinder is likely to have any effect on detonation. Think about it. Another inch or so down the bore, you might have a hotter spot. The gas there might get a bit hotter, then the piston rises squeezes that gas away from there at high speed and mixes it with other gas from nearby. Instant dilution of the problem. I'd be surprised if it was an issue at any time other than in racing engines or OEM dev engines being run at the ragged edge of tuning. Say what now?
    • joshuaho96
      Rb26 iron block limit

      By joshuaho96 · Posted

      https://dsportmag.com/the-tech/education/engine-tech-material-hardness-testing/ The PRP testing on block hardness I'm not sure how much it actually can be trusted. The thinner cylinder walls on RBs is a bit of a problem vs 2JZ but it really depends on the design goal. Siamesed cylinder bores like a 2JZ cause uneven cylinder wall temps too, which means a bit of distortion induced by that + the hotspot can affect knock margin. Something that actually gives me a bit of pause with the PRP block, whether super thick cylinder walls are going to keep it from being drop-in compatible on an otherwise OEM rebuild. 
    • Sleepergm
      Hks race car install

      By Sleepergm · Posted

      Yeah very valid point. I am waiting for one of the other tuners to come back from vacation so he can help me a bit when the cat is installed again. In the meantime I am going to finish up my polishing and ceramic coating that I have started myself.    N45 Dr Beasley product is highly recommended for a paint primer / polisher. Using this EXO Gtechniq also for the ceramic but next time might use the light serum before hand also. Looks great. 
    • joshuaho96
      Hks race car install

      By joshuaho96 · Posted

      Running rich in conditions where it shouldn't probably won't do great things for catalytic converter lifespan. I would fix that sooner than later.
    • GTSBoy
      Rb26 iron block limit

      By GTSBoy · Posted

      Yes, important point. Watch the Motive videos with Herman thickness testing the bores and deck. You do not want to push the unlucky (thin) block as hard as you can push the average block.
×
×
  • Create New...