Jump to content
SAU Community

Need A F.a.s.t Check Asap

dose_it

By dose_it,
in Engines & Forced Induction

 Share

Recommended Posts

dose_it Enthusiast

dose_it

Posted
Posted

hey need a fast check done and i no alot of you have downloaded i unfortunatly cant get it and cant wait till tomorrow to call up, all iv got is a vin number will this be enough?? wont post vin over net pm for details,,

cheers keith

Link to comment
https://www.sau.com.au/forums/topic/270792-need-a-fast-check-asap/
Share on other sites
paulr33 Grand Master

paulr33

Posted
Posted

yes post the VIN and someone will check it for you

theres nothing super secret to be obtained from the VIN, so posting it up, reveals nothing

it doesnt need to guarded or kept secret, its ok to post it here dude

Rekin Grand Master

Rekin

Posted
Posted

Just saying that the r32 is a type-M. Type-M package usually includes larger brakes on the front, different front bar, factory sideskirts etc. The factory options varied from dealer to dealer in Japan so there is no clear explanation for type-M

Basically nearly all r32 turbo's are type-M, havent seen a non type-m

lloydy_23 Newbie

lloydy_23

Posted
Posted (edited)

ah ok thanks you have been very helpfull.. Tho was startin to think i was onto something special when type m came up lol cheers for your help

Woops didnt no had 2 different accounts.. I think my phone automatically logs into this one

Edited by lloydy_23
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jacobzking
      Pipe from Greddy FMIC to Greddy intake manifold (RB25)?

      By jacobzking · Posted

      Does anyone sell a pipe that's made to go from the Greddy FMIC kit for ECR33 (RB25DET) to the Greddy intake manifold? 
    • niZmO_Man
      Borg Warner EFR Series Turbo's V 2.0

      By niZmO_Man · Posted

      Not that I know from experience, but in theory you'd want your gate spring to be as close to target pressure as possible, so you'd go with the higher gate spring?
    • Borci88
      Borg Warner EFR Series Turbo's V 2.0

      By Borci88 · Posted

      Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
×
×
  • Create New...