Jump to content
SAU Community

Garage Cleanout - Gtst Sii

stealth
 Share

Recommended Posts

stealth Enthusiast

stealth

Posted
Posted

1. RB25DET head and manafold $750

2. Std Nissan fly wheel, pressure plate and clutch plate $600

3. Head covers and bottom cover $400

4. Cam pully $60 (looks in good condition)

5. Std exhaust manifold heat shield $15

6. Std Nissan fuel rail and injectors $150 (Could get these "hi flowed" to get the larger reliable capacity)

7. Std Nissan throttle valve $80

8. Cam covers $60

9. Std Nissan RB25DET Turbo including dump pipe and oil connection pipe $380 (taken of stock at 70,000km)

10. Turbosmart Plumback BOV $300

11. Cam timer $50

12. Front pipe to turbo $60

13. R33 Standard BOV and gasket $50

14. R33 crossover pipe including HKS silicon connection pipe $80

15. Race Pipe - custom $350 (Used on track days. Just dropped the std exhaust and connected this baby straight on where the catalytic converter connects and it exhausts out to the side. Sounds brilliant)

16. Original Nissan air intake to air filter box $25

17. R32 crossover pipe (will fit R33) $25

18. Original automatic radio antenna $20

19. Original Nissan air intake to turbo piping 2x @ $25 each

20. Nissan 2500 coil cover 2x @ $25 each

21. Bride" racing seat. Fits straight into R33 $450 (Harness not included. Has wear mark otherwise excellent)

22. Turbo manifold gasket $15

23. Original Nissan coils and coild brackets 6x for $80 (replaced with spitfires)

24. Potenza RE540S - 225/50R16 on AVS Alloy mag wheels 16". Pearl white colour $450 (1 tyre blew out. Other 3 good for a couple more track runs. Great track tyres. Mags - Very good condition. No chips or cracks. Light weight compared to std wheels look good on car)

25. Silverstone" S-585 - 235/45R17 track tyres 2x @ $50 each (not a lot of tread for street but would still do a couple of track runs)

26. Advan" 255/40 Z R17 4x @50 each (Good track tyres. Still good for a couple of track days)

27. 300ZX original alloy wheel $25 (good condition. No cracks or major scrapes)

28. Brake pads BMXP - front wheels (Std brake pads, plenty of meat left. Use them to replace the noise track pads when on the street)

Have photos on request. Please PM for any further deatils (notecan only chk PMs at night)

Located Brisbane - Morningside

Link to comment
https://www.sau.com.au/forums/topic/271489-garage-cleanout-gtst-sii/
Share on other sites
stealth Enthusiast

stealth

Posted
  • Author
Posted

1. RB25DET head and manafold $750

2. Std Nissan fly wheel, pressure plate and clutch plate $600

3. Head covers and bottom cover $400

4. Cam pully $60 (looks in good condition)

5. Std exhaust manifold heat shield $15 SOLD

6. Std Nissan fuel rail and injectors $150 (Could get these "hi flowed" to get the larger reliable capacity)

7. Std Nissan throttle valve $80

8. Cam covers $60 SOLD

9. Std Nissan RB25DET Turbo including dump pipe and oil connection pipe $380 (taken of stock at 70,000km)

10. Turbosmart Plumback BOV $300

11. Cam timer $50

12. Front pipe to turbo $60

13. R33 Standard BOV and gasket $50

14. R33 crossover pipe including HKS silicon connection pipe $80

15. Race Pipe - custom $350 (Used on track days. Just dropped the std exhaust and connected this baby straight on where the catalytic converter connects and it exhausts out to the side. Sounds brilliant)

16. Original Nissan air intake to air filter box $25

17. R32 crossover pipe (will fit R33) $25 SOLD

18. Original automatic radio antenna $20

19. Original Nissan air intake to turbo piping 2x @ $25 each

20. Nissan 2500 coil cover 2x @ $25 each 1x SOLD

21. "Bride" racing seat. Fits straight into R33 $450 (Harness not included. Has wear mark otherwise excellent)

22. Turbo manifold gasket $15

23. Original Nissan coils and coild brackets 6x for $80 (replaced with spitfires)

24. Potenza RE540S - 225/50R16 on AVS Alloy mag wheels 16". Pearl white colour $450 (1 tyre blew out. Other 3 good for a couple more track runs. Great track tyres. Mags - Very good condition. No chips or cracks. Light weight compared to std wheels look good on car)

25. Silverstone" S-585 - 235/45R17 track tyres 2x @ $50 each (not a lot of tread for street but would still do a couple of track runs)

26. Advan" 255/40 Z R17 4x @50 each (Good track tyres. Still good for a couple of track days)

27. 300ZX original alloy wheel $25 (good condition. No cracks or major scrapes)

28. Brake pads BMXP - front wheels (Std brake pads, plenty of meat left. Use them to replace the noise track pads

post-9127-1243672751_thumb.jpg

post-9127-1243672804_thumb.jpg

post-9127-1243672909_thumb.jpg

post-9127-1243673062_thumb.jpg

post-9127-1243673189_thumb.jpg

post-9127-1243673277_thumb.jpg

post-9127-1243673567_thumb.jpg

post-9127-1243674607_thumb.jpg

post-9127-1243674681_thumb.jpg

post-9127-1243674969_thumb.jpg

post-9127-1243675131_thumb.jpg

post-9127-1243675225_thumb.jpg

post-9127-1243675580_thumb.jpg

post-9127-1243675718_thumb.jpg

post-9127-1243675819_thumb.jpg

post-9127-1243675953_thumb.jpg

maniekan Collaborator

maniekan

Posted
Posted

hey bud yeah im still interested in the turbo just curious is yours the nylon compressor wheel i heard on another forum that the later model series two turbos are basically R34 replacement turbo's which have the nylon compressor wheel better for heat dissipation

Im on the gold coast, just give me a call and we can discuss further 0404803660 thanks man my names Chris

stealth Enthusiast

stealth

Posted
  • Author
Posted
hey bud yeah im still interested in the turbo just curious is yours the nylon compressor wheel i heard on another forum that the later model series two turbos are basically R34 replacement turbo's which have the nylon compressor wheel better for heat dissipation

Im on the gold coast, just give me a call and we can discuss further 0404803660 thanks man my names Chris

Hi Chris

Can you tell by looking at the compressor wheel?

It was taken off a very clean Series II engine.

I'll attach a photo if this helps.

Maybe I can meet you half way on the coast on weekend to deliver?

Cheers

Dave

post-9127-1244023888_thumb.jpg

post-9127-1244024055_thumb.jpg

post-9127-1244024132_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      ugently need expert / experienced opinion

      By Duncan · Posted

      Certainly. It is probably broken under the wire style clamp. At least that one is easier to get at than the front one.   Sounds like it isn't a major leak, I'd start with backing off the the water feed and return banjos into the turbos half a turn then tightening properly. Hardlines can still crack over time, either in the tube (particularly when turbos are changed if the banjo is siezed in the the tube) or at the brazed joins between the lines and the banjo fittings. A coolant system pressure test will reveal all. BTW you'd be able to get a sump without exchange, it will just cost more as they will have to source another stock one for the next customer. If you want to address the sump a much better option is something like this https://www.hioctanedirect.com/hi-octane-racing-sump-extension-nissan-rb26 that you weld in locally (and add the oil return fittings at the same time)
    • Duncan
      Fourth gear grind

      By Duncan · Posted

      Pretty sure you are thinking of the throwout bearing there (which you should change when you change your clutch), when they are worn they will get quieter if you put your foot on the clutch. An input shaft bearing is turning/noisy at all times.
    • GTR_JOEY
      Comfortable replacement seats for R32 GTR

      By GTR_JOEY · Posted

      I’ll have more of a look into Recaros over the weekend. It’s taken me 2 days to figure out which Bride seats suit my application haha.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I am aware of their presence, but the product page looked like that conversion will eliminate the AWD capability. Fact remains it's kind of a hassle to send my oil sump halfway around the world and buying an extra one is expensive and unnecessary. Before I go hat route I'd explore more local options.    Would you recommend I just pull the engine and renew as many things as possible since I'm already having problems with some leaks? Would have to get an engine crane first though.
    • DRoc81
      Shifting questions

      By DRoc81 · Posted

      Are there any indicators that the vehicle is in limp mode?  Any dash light, or something.  Or is it just lack of acceleration?
×
×
  • Create New...