Jump to content
SAU Community

Recommended Posts

Ok, time to part out my car, been tryin to sell for 7 k whole but now i think its time to share its fruit around.

So heres the list

HKS GT2530 turbo and lines - $1,100

Hybrid front mount intercooler - $500

Standard Air flow meter - $100

Stainless steel intake pipe - $30

ISC coilovers - $800

Front Adj. Camber arms - $100 pair

Rear Adj. Camber arms - $100 pair

Adj. Castor rods ( one bent) - $50

HKS external wastegate with screamer pipe - $ 500

DBA slotted and drilled rotors in Very good condition - $500 for all 4

ceramic track brake pads - $100 for all.

Tomei 2 way diff - $800

oil catch can with lines - $ 40

ADjustable fule pressure reg. -$ 90

front seats - $100 per seat

Late model headlights - $200 each

All parts are still on the car so keep that in mind.

PM me for any other stuff that you may want or need.

or call or msg me on 0405 300 245

Cheers, Josh.

Edited by R32z all da way
Link to comment
https://www.sau.com.au/forums/topic/271523-parting-out-my-r32/
Share on other sites

any chance of a pic of the front headlights/indicator??

hey bud not gona bother with a pic of the headlights, they are imaculate late model ones, someone said they looked like GTR ones but who knows, 300 bucks for both headlights and both indicators. cheers

  • 2 weeks later...
  • 2 months later...

Appologies for not keeping this thread up to date!!

Only things i have left are

Front bar $ 200

Rear bar $ 100 as a few scratches

Reo bar $50

tail lights $150 for pair

boot lid, no spoiler holes. $ 180

bonnet $200

one headlight $90

passenger seat $ 50

rear seat $100 (seat base and upright section)

both doors with trims , Passenger side is damaged from accident. $ 150 for good one, $ 50 for damaged one.

need all these parts gone asap, need to put a car in the garage :)

msg or call 0405 300 245 is best way to contact me.

cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Great interview on damper settings and coil selection by HPA https://www.facebook.com/HPAcademy/videos/30284693841175196/?fs=e&s=TIeQ9V&fs=e
    • Yeah, it was a pretty deep dig.
    • The values for HID colour are also defined ~ see https://www.legislation.gov.au/F2006L02732/latest/text  ~ goto section 3.9 onwards ....
    • So, if the headlights' cutoff behaviour (angles, heights, etc) are not as per 6.2.6.1.1 without automatic levelling, then you have to have to have automatic** levelling. Also, if the headlight does not have the required markings, then neither automatic nor manual adjusters are going to be acceptable. That's because the base headlight itself does not meet the minimum requirement (which is the marking). ** with the option of manual levelling, if the headlight otherwise meets the same requirements as for the automatic case AND can be set to the "base" alignment at the headlight itself. So that's an additional requirement for the manual case. So, provided that the marking is on the headlight and there is a local manual adjustment back to "base" on the headlight, then yes, you could argue that they are code compliant. But if you are missing any single one of these things, then they are not. And unlike certain other standards that I work with, there does not seem to be scope to prepare a "fitness for purpose" report. Well, I guess there actually is. You might engage an automotive engineer to write a report stating that the lights meet the performance requirements of the standard even if they are missing, for example, the markings.  
    • Vertical orientation   6.2.6.1.1. The initial downward inclination of the cut off of the dipped-beam to be set in the unladen vehicle state with one person in the driver's seat shall be specified within an accuracy of 0.1 per cent by the manufacturer and indicated in a clearly legible and indelible manner on each vehicle close to either headlamp or the manufacturer's plate by the symbol shown in Annex 7.   The value of this indicated downward inclination shall be defined in accordance with paragraph 6.2.6.1.2.   6.2.6.1.2. Depending on the mounting height in metres (h) of the lower edge of the apparent surface in the direction of the reference axis of the dipped beam headlamp, measured on the unladen vehicles, the vertical inclination of the cut off of the dipped- beam shall, under all the static conditions of Annex 5, remain between the following limits and the initial aiming shall have the following values:   h < 0.8   Limits: between 0.5 per cent and 2.5 per cent   Initial aiming: between 1.0 per cent and 1.5 per cent   0.8 < h < 1.0   Limits: between 0.5 per cent and 2.5 per cent   Initial aiming: between 1.0 per cent and 1.5 per cent   Or, at the discretion of the manufacturer,   Limits: between 1.0 per cent and 3.0 per cent   Initial aiming: between 1.5 per cent and 2.0 per cent   The application for the vehicle type approval shall, in this case, contain information as to which of the two alternatives is to be used.   h > 1.0   Limits: between 1.0 per cent and 3.0 per cent   Initial aiming: between 1.5 per cent and 2.0 per cent   The above limits and the initial aiming values are summarized in the diagram below.   For category N3G (off-road) vehicles where the headlamps exceed a height of 1,200 mm, the limits for the vertical inclination of the cut-off shall be between: -1.5 per cent and -3.5 per cent.   The initial aim shall be set between: -2 per cent and -2.5 per cent.
×
×
  • Create New...