Jump to content
SAU Community

Recommended Posts

Ran my 32 gtr at heathcote today.

1st run i ran a 13.4 @ 113mph 2.38 60ft :(

2nd run was a 12.3 @ 109mph 1.86 60ft

3rd run i ran a 12.1 @ 108mph 1.74 60ft

Was kind of dissapointed i didn't break 11's today but it's my 2nd week owning the car and my first launch of the day was my 3rd time ever launching this thing... was also my first time at a drag strip.

On the first run i was shifting at 7k and the other 2 i was shifting at about 8, so obviously 7k is the sweet spot. How far into the 11's do you think i could go shifting at the right spot with a 1.7 60ft? Obviously i would be getting over 113mph.

Car is making 330rwkw

Link to comment
https://www.sau.com.au/forums/topic/271540-heathcote/
Share on other sites

Tyres, suspension and ride height................ all have major effect at the drags.

Well i mean running it exactly the same as i did today but with a higher mph. 108 is pretty gay considering i got 113 with a poo 60ft. Cbf adjusting my suspension atm

Edited by topher_
Link to comment
https://www.sau.com.au/forums/topic/271540-heathcote/#findComment-4614042
Share on other sites

Well i mean running it exactly the same as i did today but with a higher mph. 108 is pretty gay considering i got 113 with a poo 60ft. Cbf adjusting my suspension atm

Thats how it works... generally MPH is lower if the 60ft/ET is faster.

Sadly though, you dont have 330rwkw with only 108mph/1.760ft... much less infact.

Link to comment
https://www.sau.com.au/forums/topic/271540-heathcote/#findComment-4625042
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
    • I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
    • Awesome writeup and details. Thanks for sharing the story so far. I can relate to parts of it with my previous car and some of the issues I had to deal with.
    • Wow the colour matched hard top completely transforms the car. Are there any nice front lip options for the car or is that off the table?
    • Generally yes but for some reason I've been ruthless this time around!  I might even need to do another tip run after the way I've finally been able to hit the delete button on shit I've stepped over, stepped around and tripped over for the past 10 years!
×
×
  • Create New...