Jump to content
SAU Community

Massive Parts Sale - Brakes, Semi's, Wheels, Brace


Recommended Posts

Hi,

Have the following items for sale;

324mm Brake Upgrade Kit

S14 Calipers and rotors drilled to 4 stud

R32 GTR Front Calipers

Yokohama Advan 235/45/17 Semi's

RE 55's 235/45/17 semi's

17 x 7.5 + 35 ALT Wheels

16x7 & 16x8 Blitz Wheels

Whiteline Front Strut Brace

Info below.

All items located in Sydney.

All prices are near offer! Need these gone!

Can be contacted by PM or 0403 434 495.

BRAKES

Selling all these brake items as I am looking to upgrade to an AP Racing Kit.

1. 324mm Big Brake Upgrade Kit for S14/S15/R32/R33/Z32 300ZX

Price: $480 ono

This kit can be used with your standard calipers. You bolt this kit on to use a 324mm GTR Brembo sized rotor which not only looks better but provides better braking ability. This was only used for approximately 5000km. I have not used it I have only fitted it to make sure it all fits up which it does.

I bought the kit to use with the R32 GTR calipers but they did not fit.

Kit contains;

324mm GTR sized DBA 4000 rotors

Brackets to mount the caliper in the new position

All bolts, nuts and washers to fit

Ferodo Formula Pads (Standard sized pads can also be used and are recommended by some)

This is the same kit as this on ebay which sells for $900

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...em=130094159891

IMG_3743.jpg

2. S14 Brake Calipers with S14 rotors that have been redrilled to 4 stud.

Price: $350 ono

S14 calipers in reasonably good condition with rotors. Can use these on S13/180SX without having to do a 5 stud conversion. These were on my car for 25000km and did quite a few track days. They stop really well and I had no problems whatsoever with them. The rotors were machined approx 3000km's ago. The rust is from water that fell on the rotor - this will come straight off after a light drive.

Will throw in Lucas TRW pads that have only done one track day ie 400km's.

Caliper pics above ^^^^

IMG_3819.jpg

3. R32 GTR Front Brake Calipers

Price: $280 ono

R32 GTR front calipers that I bought but never used. Was told they came off a 1992 R32 with 70,000km's. Bought off a respected member on here. I have painted them with the intent to put onto the car.

These do not fit with the 324mm brake upgrade kit (I was told they did ) which is why I bought them.

IMG_3801.jpg

SEMI SLICKS

1. Yokohama Advan AO48 235/45/17 Full Set of 4

Price: $300 ono

OK condition, good for a few track days. Bought these a little while ago but never got round to fitting them up. Have been stored in my garage.

IMG_3802.jpg

IMG_3804.jpg

IMG_3806.jpg

2. Bridgestone RE55's 235/45/17 Full Set of 4

Price: See below

Still have a few track days in them maybe more. I changed to 5 stud so could not use the wheels they were on. They are still on the wheels.

IMG_3809.jpg

IMG_3816.jpg

WHEELS

1. 17x7.5 + 35 all 4 ALT Wheels

Price: $600 ono with the RE55's semi's

Some gutter rash, but they made great track wheels and or drift wheels. Have the Bridgestones semi on them.

Would prefer to sell together with the RE55's but can separate at buyers expense.

IMG_3814.jpg

IMG_3812.jpg

Worst of the gutter rash

IMG_3815.jpg

2. Blitz Rims 16 x 7 and 16 x 8 I think +35 and + 38

Price: $250 for all 4

One of the 16 x 8 rims has a chunk missing on the inside of the rim (probably 5-8cm wide) that would need to be repaired. Not knowing this I drove on the rim from Wakefield Park to Sydney and it drove fine, no wobble or sign of a buckle nor leaking tyre.

No pics but they look like these; not in as good nick though!

http://www.japanautoswrec.info/DSCF0861.JPG

STRUT BRACE

1. Whiteline Adjustable Front Strut Brace

Price: $100 ono

Don't need this as I have a Cusco Brace. Bought off a NS.com member. Came off a 180SX SR20DET.

IMG_3807.jpg

IMG_3808.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • There are fixes for this. In industry we use compressed air for everything. It is frequently wet, and many things cannot tolerate it. So there are various forms of driers available that you can install. The simplest option for something like this would be a dessicant drier. Much cheaper to replace some silica gel than actuator cylinders.
    • That's a solid update mate, well done at WA FOS. You may already know this, but the actuators on the paddle shift are a service item and are sadly not that reliable. As I understand it they collect water from the compressor (condensation) which then rusts the bores/pistons in the actuators. A mate of mine had no end of trouble with them in one if his circuit cars, apparently it's a 'known issue'. Buy a couple of spares at great expense to ensure you never have any problems with the ones you've got! Any clues about what the new WTAC rules might be? While faster cars are cool the Pro class arms race has got to the point where you wouldn't even bother entering without a $1m budget and even then I don't think you'd win.  
    • https://nissan.epc-data.com/skyline/er34/3945-rb25det/trans/317/31940N/ The pictures of the part you're talking about is clearly not just one solenoid. You can see another picture of it here: https://www.alltranz.com.au/shop/drivetrain/automatic-transmission/RE5R01A/product/9305/ The 4 speed automatic in the GTT is Nissan corporate stuff. You can search up similar jobs done on a Frontier or Pathfinder with a RE4R01B to get an idea for what the internals are going to look like and the procedure like this:   
    • Hi Chris,   long time since your post, just wondering if you have the Pinout for the v35 stereo plugs, I bought the roem nis2 harness but it doesn’t match the v35 connector. any help appreciated, I can work out the grn and power constant. But the rest might be hard. thanks Tyson
×
×
  • Create New...