Jump to content
SAU Community

Stock Rs4 Springs

Race__24
 Share

Recommended Posts

  • 2 weeks later...
  • 2 weeks later...
wolven Contributor

wolven

Posted
Posted

hey guys looking for some stock S1 Rs4 springs to borrow as I plan on taking them to Cartorque and getting them to arrange a custom set of King Springs. If you can part with them for a short while (im assuming wost case a month) i would very much appreciate it and would try and make it worth your while :O.

Spoke to dave at cartorque and he is willing to discuss a groupbuy if anyone is interested i know there are more and more stags coming into adelaide and off the shelf parts just wont do so please help!

cheers

BensDR30 Experienced

BensDR30

Posted
Posted
hey guys looking for some stock S1 Rs4 springs to borrow as I plan on taking them to Cartorque and getting them to arrange a custom set of King Springs. If you can part with them for a short while (I'm assuming worst case a month) i would very much appreciate it and would try and make it worth your while :) .

Spoke to dave at cartorque and he is willing to discuss a group buy if anyone is interested i know there are more and more stags coming into Adelaide and off the shelf parts just wont do so please help!

cheers

Once Car Torque get my S-tune Bilsteins back from Heasmans (rebuild) & I fit them along with the S-Tune springs, my RSFV springs will be available. I plan on getting an ETA update on the rebuilds early next week.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Papichulo96
      Rb head oil drain dimensions

      By Papichulo96 · Posted

      Bump on this to not make another post, had a ‘head drain’ leak on me and have the engine out as we speak. Planning on just putting a new freeze plug back in , plug the tapped holes and just be done with that headache.    Now I still want to relieve pressure to allow oil to pass down the blocks returns easier. I’ve seen catch cans with multiple vents help folks with this issue on this forum.  I’m wanting to make my own. I have some pictures here of my setup if anyone can help how I should plumb and design the catch can I would deeply appreciate it !   rb25 Oil upgrades: 1.0mm restrictor n1 pump/billet gears extended crank collar  extended sump with trap doors/w welded fitting    
    • GTSBoy
      Need AC Compressor for R32

      By GTSBoy · Posted

      The Frenchy's kit is the way to go forward. A modern compressor that weighs about 1/2 as much, is at least twice as efficient, and will do a good job on R134a. And of course the kit has everything else you need to connect it up and have it work properly.
    • Zabuza
      Need AC Compressor for R32

      By Zabuza · Posted

      Hey all , I am in the process of having the AC system in my r32 GTST converted from r12 to r134a and I’m being told my compressor has gone bad and I will need a new one. I was wondering if anybody has any suggestions for what is the best route to go aside from dropping $1500 on a new oem one? I did see that Frenchy’s performance garage offers a kit to mount a Toyota compressor, has anybody actually used this kit on their car? Or is there anywhere I could purchase just a clutch? Any help is appreciated.
    • GTSBoy
      Help Understand GTT Boost Setup

      By GTSBoy · Posted

      Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • Sxnjeet
      Help Understand GTT Boost Setup

      By Sxnjeet · Posted

      yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
×
×
  • Create New...