Jump to content
SAU Community

Sk Bilstein R33 Gtst Suspension, S1 Front End, Ems, Headlights,

J'z-R33
 Share

Recommended Posts

J'z-R33 Grand Master

J'z-R33

Posted
Posted

Hey guys,

All parts are located in Westmead (Sydney's West) all parts are used unless specified. Pick up is prefered but I can arrange freight at your cost.

R33 GTST related:

R33 GTST Ntk o2 sensor, brand new $77 delivered..

Sydneykid Bilstein R33 GTST suspension set up ready to go F+R. Used for 5000-8,000kms paid $1600 Sell $1000ono

S1 front head lights, with eyelids and are in good condition. $400 pair

S1 bonnet, few dents and will need a spray. $100

Front Fenders L+R $250 pair (midnight purple)

Drivers front fender $125. (gun metal grey)

S2 Drivers Airbag $200. please note it is only the airbag not the steering wheel.

R33 S2 interior carpet $80 in top condition not tears etc.

R33 GTR related:

Greddy oil cooler with braided lines $700 came off a R33 S3 used for unknown kms.

EMS Stinger 4424 with loom attachement and PC cable. Came with my GTR but have replaced with a Haltech.. $800

http://www.enginemanagement.com.au/product...products_id=107

Other stuff:

V35 steering wheel in good condition, no airbag $200

Genuine Bosch 1 x 040 or 2 x 044 $220 each delivered

Haltech E11V2 brand new, $1450 with a generic harness or $1500 with a plug n play patch loom.

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

Pm me with your email address as the pics take way too long up upload here.

No low ball offers please & dont waste my time, If your cousin can get them cheaper go buy them off him.

Cheers,

Johno

Messiah Mentor

Messiah

Posted
Posted
Hey guys,

R33 GTST related:

...

S1 front head lights, with eyelids and are in good condition. $400 pair

Drivers front fender $125. (gun metal grey)

...

Cheers,

Johno

Can i get pics of the headlights and the gunmetal quarterpanel?

J'z-R33 Grand Master

J'z-R33

Posted
  • Author
Posted

Could you please Pm me with your email addresses. Pics take way to long to load up here.

Cooler mounts behind the BOV's (passangers side) on a GTR. No thermo or relocator sorry.

Cheers,

Johno

J'z-R33 Grand Master

J'z-R33

Posted
  • Author
Posted
headlights sold..

Bilstiens back up for sale, buyer fell through.. items will not be held, first with cash gets it.

Cheers,

Johno

J'z-R33 Grand Master

J'z-R33

Posted
  • Author
Posted

Items SOLDHeadlights SOLD

Bilstiens SOLD

S2 Drivers Airbag SOLD

Prices dropped

S1 bonnet - $80

R33 GTST Ntk o2 sensor - $77 delivered

Front Fenders L+R $200 pair (midnight purple)

Drivers front fender $100 (gun metal grey)

R33 S2 interior carpet $80

Greddy oil cooler $600

EMS Stinger 4424 $700

Genuine Bosch 1 x 040 or 2 x 044 $210 each delivered

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

V35 steering wheel $100 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

More stuff to come.

J'z-R33 Grand Master

J'z-R33

Posted
  • Author
Posted

Prices dropped

S1 bonnet - $80

R33 GTST Ntk o2 sensor - $70 delivered

Front Fenders L+R $200 pair (midnight purple)

Drivers front fender $100 (gun metal grey)

R33 S2 interior carpet $80

Greddy oil cooler $600

EMS Stinger 4424 $600

Genuine Bosch 1 x 040 or 1 x 044 $210 each delivered

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

V35 steering wheel $100 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

J'z-R33 Grand Master

J'z-R33

Posted
  • Author
Posted

Front Fenders L+R $200 pair (midnight purple)

Drivers front fender $100 (gun metal grey)

R33 S2 interior carpet $80

Greddy oil cooler $600

EMS Stinger 4424 $600

Genuine Bosch 1 x 040 $210

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

V35 steering wheel $50 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

J'z-R33 Grand Master

J'z-R33

Posted
  • Author
Posted
Front Fenders L+R $150 pair (midnight purple)

Drivers front fender $75 (gun metal grey)

R33 S2 interior carpet $50

Greddy oil cooler $600

EMS Stinger 4424 $500

Genuine Bosch 1 x 044 $210

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $180

V35 steering wheel $50 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

few price drops..

J'z-R33 Grand Master

J'z-R33

Posted
  • Author
Posted
Hey mate do you still have the ems stinger forsale?

hey mate

yeah its still for sale... if you like give me a call on 0401466244

cheers

johno

J'z-R33 Grand Master

J'z-R33

Posted
  • Author
Posted

Sorry mate, only selling whats listed.

Front Fenders L+R $150 pair (midnight purple)

Drivers front fender $75 (gun metal grey)

R33 S2 interior carpet $50

Greddy oil cooler $600

EMS Stinger 4424 $500 EMS sold pending pick up..

Genuine Bosch 1 x 044 $210

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $180

V35 steering wheel $50 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

  • 2 weeks later...
J'z-R33 Grand Master

J'z-R33

Posted
  • Author
Posted
Front Fenders L+R $150 pair (midnight purple)

Drivers front fender $75 (gun metal grey)

R33 S2 interior carpet $50

Greddy oil cooler $600

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $180

V35 steering wheel $50 no airbag.

Haltech Platinum Sports 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Well, this is probably where a wiring diagram and a multimeter come into play.
    • Jarsky
      gauge needle removal

      By Jarsky · Posted

      I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Jarsky
      R33 GTST Axles

      By Jarsky · Posted

      Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Jarsky
      R34 Speedo not working after manual swap

      By Jarsky · Posted

      Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Rezz
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By Rezz · Posted

      Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...