Jump to content
SAU Community

Recommended Posts

would also like to add, this is a r34 gtr with low km's. not very old. it would not be suffering from coil pack issues yet.

yes but it is 10 years old, and the engine is making alot more power than the standard engine, and the coilpacks just cant handle it anymore.

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

would it not be worth it to upgrade the coilpacks anyway... they are 10 years old, the engine is making 150kw more than standard... bakes has spent alot of the folding stuff on all this gear... even if they didnt need to be done, it would be a worth while upgrade.

what happens if he swaps some coils for someone else's... and the other person's cant handle the power and break down... then bakes is up for 2 sets of coils instead of one. the only way to rule out the coils is to get new ones.

Bakes

I am having the same issue as you with my car - exactly the same - will occasionally miss on or off load - and yes, sounds exactly like a WRX when started up sometimes.

The problem is pretty intermittent for me - and seemed to resolve itself after I replaced the plugs - then it came back again - but not as frequently or as bad.

I do find that once the car has warmed up a bit it will come good.

I've been pondering the Splitfire coilpacks or one of the HKS ignition kits as a possible solutions.

So let us know how you go on once the coils go in.

Bakes

I am having the same issue as you with my car - exactly the same - will occasionally miss on or off load - and yes, sounds exactly like a WRX when started up sometimes.

The problem is pretty intermittent for me - and seemed to resolve itself after I replaced the plugs - then it came back again - but not as frequently or as bad.

I do find that once the car has warmed up a bit it will come good.

I've been pondering the Splitfire coilpacks or one of the HKS ignition kits as a possible solutions.

So let us know how you go on once the coils go in.

Seriously man, I have to agree, sounds EXACTLY the same. Ive ordered the Splitfires today, Ill let you know how it goes. Might be able to put them in late next week depending on when they arrive at my door.

HKS use stock rb26 coil packs on the drag car. runs 7's ?

wow - i had no idea...i have a standard set on my gtr & another standard set from my previous aust delivered gtr :(

i guess i wont be upgrading for now if there is no real benefit other than age/wear & tear

I would suggest to try some ones elses coils first. I had a miss firing problem, I tried the coils, didnt fix it, yet I still got charged for them. Anyway, in the end for me it was a leak in the gaskets. Run a smoke test through your valves and see if there are any leaks. Soon as I sorted my gaskets out, the car was so smooth again :(

HKS quite possibly change their coilpacks as often as they do plugs.. which is after 7 seconds.. i have no doubt that the standard coilpacks are capable, when new.. but i think id rather cough up $600 for splitfires than $1500 for a new set of stockies.

HKS quite possibly change their coilpacks as often as they do plugs.. which is after 7 seconds.. i have no doubt that the standard coilpacks are capable, when new.. but i think id rather cough up $600 for splitfires than $1500 for a new set of stockies.

where do you get that price from? i had no idea they were that expensive

where do you get that price from? i had no idea they were that expensive

the only place you can get them from... nissan. last I checked their 26 coils were about $300 each retail. why do you think people buy splitfires when their standard coils fail? it's not for the pretty blue colour that's for sure!

Last time i was at my tuners he said he had a pretty worked 34 gtr on the dyno. It was making ok power but not what everyone expected with the setup it had (I don't know details of setup). He said it wasn't missing/hesitating or anything but they decided to throw a set of split fires in as well as a set of HKS plugs. Straight away the car made 100kw more. He said the same thing as R31Nismoid, that the late model coil setup on 33's and 34's are just shit and he recommended his customers with late model skylines to change them, or keep this in mind, even before the car goes into the workshop. Anyway, my 2c.

well one thing I'd look at is plugs. as you run more power and more boost you need to think about the heatrange plug you are using. for a standard car 6s may be ok. personally even with light upgrades I'd go to 7s and with more boost and different turbos you may even need 8s. my silvia will miss heavily as it ramps onto boost with 7s, but runs amazingly well with a set of 8s in there. I know coppers are cheap and are "ok". i was a big fan of using cheap $3 NGK coppers and changing them a lot. but now having used true high performance Greddy and HKS plugs I can tell you there is a big difference. Since they use irridium tips they can run a very fine 0.6mm tip which is a good thing. high performance car should have high performance plugs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If it's magnetic what is stopping you from using a magnet on a thin wire from fishing it out?
    • Those 2 solenoids in that assembly I mention, are the PWM solenoids for torque converter lock-up clutch & EPC (line pressure control) ~ when most folks hear of 'solenoid failure', the tendency is to think electrical failure...but fact of the matter is, especially wrt the EPC solenoid (which is moving/running all the time), you can have an electrically 'good' solenoid, that's absolutely broken/worn out mechanically inside...ie; valve plunger return spring rubbing against spring retainer plate, lowering preload pressure.. ...and the solenoid armature extension limit spring wafer with bad wear/broken off petals... ...and if there's ever been any metal flying about, damage to the valve plunger end itself... ...the stuff one never really sees, unless you go the whole 10yards trying to answer the question "why is my line pressure screwy, but TCU isn't flagging any EPC solenoid fault?"...and carefully dissect the solenoid. Worst (and most probable) scenario is when the plate spring petals break off, they get held by the magnetic flux, get mashed up by the armature into little bits, which end up in the space between the armature & shading core bore, and things get stuck or randomly jam up, and your line pressure goes flat and doesn't change...and the TCU never sees it, as it doesn't actively monitor LP... ..then it gets into insidious land, if you end up with lower than expected line pressure...lets say high clutch..and the lower pressure causes it to slip ~ when I say 'slip', think say 2000rpm on the drive plates, and 1800rpm on the driven plates, because the slip is making them under-rotate by 200rpm ; you get all the usual nasties like heat and band/clutch wear, but even if it's only 20rpm slip the same thing happens...and... you'll hardly ever pick this up driving the thing with the torque converter active as it effectively masks these sorts of slippages that are line pressure related ...(the newer TCUs can detect clutch slip rate)...just  FYI as it were...  
    • There's nothing that some paddle pop sticks and extra cable ties can't fix.
    • Hey guys, so Golebys has good prices on Bosch injectors, and also sell an adaptor to go from 1/2 length injector to standard with the Nissan 10.5mm top seal.  Does anyone know if that adaptor is to suit the 14mm or 11mm injector tops?  And re. The bottom seal, to suit my standard RB20 intake, would I be right in saying I can just slip the 14mm square section O ring over the bottom of the new injector and done? Thanks in advance guy, Cheers, Rowdy
    • F my life. I was changing the oil on my R32 GTR today as usual and ran into a bit of a snag. I drained the oil out and was getting ready to finish the job by tightening the drain plug, however The stupid magnetic oil drain plug snapped in half, right at the magnet part. After about an hour of trying to remove it, I used a drill bit, which unfortunately pushed the magnet all the way into the pan, and just leaving the hollow threaded part of the bolt remaining. I was able to remove the hollow portion of the bolt from the oil pan with some pliers but the magnet is still in there.  So, the question is, should I drop the oil pan to get the magnet piece out, or is it okay to leave it in there? I really dont want to drop the pan, i'm about to go nuts.  PSA: Do NOT buy a BLOX magnetic drain plug. This is the one i had.    https://bloxracing.com/products/magnetic-oil-drain-plug-m12x1-25mm?variant=37131252859052&country=US&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&gad_source=1&gclid=CjwKCAjw47i_BhBTEiwAaJfPpgti1D2JwO7TDuMpXuqeQPCuIQSAfwxpWQH5rF9MD7sm5SCZDWLR_RoC_YoQAvD_BwE    
×
×
  • Create New...