Jump to content
SAU Community

Assorted Genuine And Aftermarket Gtr / Rb26 Parts, Engine Parts, R32 Body Parts, Nismo R34 Gtr Exhaust Wheels And Lots More


Recommended Posts

Hi Guys

This is a "evolution" of an old post - sold stuff has been taken off, prices have been updated and some more stuff added. I will add photos as I find them.

Engine parts:

post-a191811-RB26-Block-1.jpg

R33 RB26 Block - Standard 05U

Standard 86mm bore size

Will need "tunnel bore" as cradle is off another block

$300

R33 RB26 Block - 05U

87mm Preped by ADVAN (stamped into block)

Turbo oil feed has been re-enforced

Has crack around one head stud

Came out of running car

(I bought this off another forum member apparently can still be used - but I havent investigated any further)

$250

post-a191796-GTR-Rods.jpg

RB26 Standard Rods

Good Condition

Ideal Upgrade for RB25 apparently?

$150 set

RB26 Standard Rods

Good Condition

Fitted with ARP Studs

$200 set

post-a191787-Cam-Gears-1.jpg

Adjustable Cam Gears

Suit RB20 / RB26

Inlet and Exhaust

$150 pair

post-a191788-Cam-Gears-3.jpg

Adjustable cam gears

(exhaust just cnc slotted)

$120 pair

post-a191789-Cam-Gears-Stock.jpg

Stock Cam Gears

RB26

$50 pair

post-a191815-Sump-With-Diff.jpg

RB26 Sump With Diff

Came off R33 (suits R32 as well)

$450

post-a191817-Turbos1.jpg

Rebuilt R33 GTR Turbos

New Bearings and Seals

360 degree thrusts

N1 Exhaust Turbine

Never Used

$POA Arriving Soon

(pic)

GTR Group A Turbos

Modified Housing

Fully Rebuilt

Came of a car prepped by Mines

Available soon

$POA

Suspension parts:

post-a191791-Cusco-Tops.jpg

Cusco Pillowball Tops

Suit BNR32

Suit many types of suspension

As is

$150 set

(pic)

Cusco F Upper Control Arms

Suit BNR32

Stronger and allow more neg than stock arms / good upgrade for worn stock arms

$POA Available soon

ELECTRONICS

post-a191782-AFM-s-2.jpg

Z32 80mm AFM's x 2

$450 pair or $500 with plugs

post-a191790-Chip.jpg

Japaneses Chip for R32 GTR ECU

Fujitsaki SPL (?)

Chip Only

Have used this chip and it works well on our fuel and 18psi

$80

post-a191813-STOCK-ECU.jpg

Stock GTR ECU

Missing top and bottom lid (not as pictured)

(I put them on my power FC...)

$150

post-a191802-IMPUL-ECU.jpg

IMPUL ECU

Suit R32 and R33 GTR

Good upgrade if you are running intake and exhaust mods

Good AFR's

$250

(pic)

R32 GTR Gauges

Three Gauge Cluster from centre console

$100

post-a191808-Oil-Pressure-Gauge.jpg

JDM "LMOO" Oil Pressure Gauge

Mechanical includes braided line

$50

R32 GTR Body Parts

post-24243-1243422957_thumb.jpg

Nismo style sideskirts

Rear Section only

(fit up / over factory skirts)

$150 pair

post-24243-1243423023_thumb.jpg

Trust style read pods

$150 pair

or both Nismo skirts and trust posds for $250 the lot

WHEELS

post-a191797-GTR-with-Technos.jpg

Technomagnesio

Magnesium alloy 5 spoke rim

17 x 9 +25 (suit GTR32)

Just been Stripped

can powdercoat in your choice of colour

$POA Available soon

post-a191810-rays-volk-TE37G-lg.jpg

Rays TE37

17x8 / 17x9

GTS-T offset ( +30 ish)

Just Been Stripped

can powdercoat in your choic of colour

$POA Available soon

post-a191824-Tyres-255-1.jpg

17" Tyres

255/40 hankooks (?)

70%

$150 pair

post-a191818-Tyres-255-2.jpg

17" Tyres

255/40 Yokohama Advans

70%

$200 pair

post-a191794-GTR-Air-Box-1.jpg

Stock R32 GTR Airbox

$150

post-a191783-Air-Filters-Apexi.jpg

Dual 140mm Apexi Power Intake Filters

Suit GTR with 80mm AFM's

$120 for the pair

(pic)

Stock GTR Intercooler

$200

(pic)

ARC Intercooler

Sut R32 and R33 GTR

(R34 with small mod)

$1250

EXHAUST

post-a191792-Dumps-std-.jpg

Stock RB26 Dump Pipes

$50 pair

post-24243-1243422678_thumb.jpgpost-24243-1243422697_thumb.jpg

NISMO cat back exhaust

R34 GTR

Stainless 80mm piping

Very good condition

2pce can be shipped

$500

SEATS

post-a212936-BRIDE2.jpg

Bride GIAS "Style" Seat

Exactly like GIAS / Low Max seat

Just doesnt say bride anywhere

$500 each (2 seats only)

Open to offers on some stuff - other stuff I 'm not

No lowballers please. Available for pickup in melbourne or will ship at buyers expense.

PM or email me [email protected]

Edited by Antimatter
Link to comment
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • TBF, I had 9.5 +27 on the front (and rear) of a 34 which most consider to be much the same as a R33. It fits exactly where a 18x9+30 otherwise would, if you run the same size tyre on either rim. I had a 265 on the front of mine and the tyre sidewall on the inner is the limiting factor.  I ran like -1.5 camber. I am putting 9.5 +30 into the 'feasible' camp. Will still be 18mm inset from the 18x9.5 +12 on the back though. I suspect one of these wheels is not the wheels in the original post, or it looks wonky. Pictures plz, OP  
    • hmm, thanks mate. I'm not sure how else to reduce them without loading them as attachments; the problem is some of the migrations in the past have resulted in lost pics in threads so I'd rather host them myself. Does the size cause a problem? David the driver assist stuff is one reason for the ? in the thread title (along with durability of the auto box even with rebuilding).  In theory everything can be turned off but in practice it will be a hassle as you have to remember to turn traction control off and set either Sport+ or Personal mode every time you start the car. Even when we were racing the 350z back in the day you would have those frustrating moments where you'd leave the line and it would not let you turn the TCS off until it stops interrupting for a moment. Other option is to pull some fuses and see how much it complains. There are a few modern cars in prod cars these days like M3, A45 etc. The BMWs are running OK but the A45 has been a non stop issue. And the auto Mustang that did the Bathurst 6 hours ran well but killed the trans 5 hours in.
    • The Bogan sports car goes in for it's tune tomorrow, I did bite the "I'm to lazy to do it all myself" bullet, and justified it to myself as I don't have the time but I have the coin, so I am getting them to install all the parts that have been amassed over the last few weeks In other news: "someone" reversed it into the Honda, the Honda is fine, but the MX5 now has a small ding in the rear bumper now, not enough to worry about fixing, but just enough to trigger me when washing the car 😢
    • I am amazed that you have 9.5 inch wide rims on the front! What size tyres are they paired with? How much negative camber do you run? What has been done to the guards? 
    • I have never had to think about this before but that makes sense. Too much boost bleeding off going to the wastegate actuator will overwhelm the atmospheric vent.
×
×
  • Create New...