Jump to content
SAU Community

Recommended Posts

personally i wouldnt touch a jeep, the missus wants a wrangler and i am spewing, terrible fuel economy, parts are expensive and depreciation is one of the worst on the market.

it depends though, if you only drive her once or twice a month and you dont care about fuel consumption get a 100s v8 land cruiser

$20k should get you a nice one

my cousin has been towing his 1800kg boat in his ls1 wh statesman for years and it purrs along the freeway

$5-10,000

07 v6 hilux dual cab sr

15-20.000

id take a hilux anyday of the week over a navara, triton, colorado or mazda for that matter

even a v6 territory you can have for around the 10-13k mark for a decent one

but def no jeep

Your vehicular knowledge knows no bounds.

Mate has a JK Wrangler Rubicon Petrol, returns 14lltrs per 100k's towing on 35" tyres. Most reliable 4wd in our group of tow car's.

I use a GU Patrol, awesome for it, also on 35" tyres so struggle's a little on hills, but after towing with it, i will never use anything smaller.

  • 2 weeks later...

As long as the GPS did not direct you to drive into the sea :)

On the Challenger, looks like the auto has a dual cooling system, through the engine radiator first then to it's own radiator. Crowded in front of the engine radiator - a/c, IC and auto cooler.

FYI, Navara D22's are on sale.

Top spec STR dual cabs are rolling out at under $28k drive away with 12 months rego. Bloody good buying I reckon. The D22 is a much better thing since getting the 2.5L donk. Still some way short of a D40 to drive, but at virtually HALF the price.........

2800kg towing capacity.

http://www.nissan.com.au/Cars-Vehicles/Navara-D22/Offers

FYI, Navara D22's are on sale.

Top spec STR dual cabs are rolling out at under $28k drive away with 12 months rego. Bloody good buying I reckon. The D22 is a much better thing since getting the 2.5L donk. Still some way short of a D40 to drive, but at virtually HALF the price.........

2800kg towing capacity.

http://www.nissan.co...vara-D22/Offers

... but do they have stock? Probably... I guess that's why they are on sale.

The last time I looked at them (about 18 months ago) all I got was attitude and you " you need to wait".... at the full RRP.

... but do they have stock? Probably... I guess that's why they are on sale.

The last time I looked at them (about 18 months ago) all I got was attitude and you " you need to wait".... at the full RRP.

My local dealer has 2 in stock. Next dealer along has 3 apparently......

You not driven a Great Wall?

I'm not buying a D22, but they're much better than a China ute, and now they're priced like one.

I've heard a horror story about the Navara (not sure if D22), multiple transmissions, multiple diffs, spent most of its warrantly life in the dealership.... The guy said the arrogance and lack of care by the manufacturer scared him away from Nissans forever.

Not sure if blackrex had similar issues. Maybe its worth staying away from one?

Then again, I guess most brands will have horror stories.

Mine kept on failing in the front suspension, snapped two torsion bars (they lose their spring after about 10k k's, and the car rides on the bump stops after that) I could never keep the bolts tight in the suspension linkages, even after lockwiring the nuts/bolts in place and the engine wore out the bores after 80k k's. The car was always serviced by Nissan at the correct schedules, but it was never really reliable.

not really a tow car story

but...

Took the q7 to Stockton beach on the weekend good fun

Did it easy even on 20's and 40 psi

Front lip was in danger a few times though. many funny looks from fellow 4wd's (while ripping hellis)

image_zps8366bfbb.jpg

GPS freaked out as well

Me old Jeep had a really easily removed front lip spoiler (no tools required).

3rd gear, low range (to fully disengage stab control), and rev limiter. :D

DSCF4050-1.jpgDSCF4047.jpg

was talking to one of the regulars at work today. his mate has a new Q7 in NZ. he had it for about 2 weeks before his missus clipped a gutter and shagged a tyre. $1300 later........... then the following week a vallet at a carpark hit a gutter or something and shagged a rim (took a big chunk out of the lip of the rim). also within the first month of having it he had the bike rack on the back and accidently hit the boot release button and it opened up into the bike rack, putting 2 dings in the boot door. i guess that's a bit of karma catching up after he won 31 million in lotto at the start of last year............

My old man has a 2004 D22 navara STR with the 3.0lt turbo diesel, manual 5 speed box, and it has been the most reliable car he has ever had. It is a work vehicle that tows 2 tonne regularly (once a week), and has done 250000 without anything major gone wrong. Perhaps it is the 2.5cr that isn't as good?, He tested both at a similar time and he said the 2.5CR (common rail) didn't "feel" as good as the 3.0. I also heard that the 2.5CR was primarily manufactured in Spain, while the 3.0 was made in Japan. Whether that has anything to do with build quality is anyone's guess.

Edited by Grimesy

was talking to one of the regulars at work today. his mate has a new Q7 in NZ. he had it for about 2 weeks before his missus clipped a gutter and shagged a tyre. $1300 later........... then the following week a vallet at a carpark hit a gutter or something and shagged a rim (took a big chunk out of the lip of the rim). also within the first month of having it he had the bike rack on the back and accidently hit the boot release button and it opened up into the bike rack, putting 2 dings in the boot door. i guess that's a bit of karma catching up after he won 31 million in lotto at the start of last year............

yea i bought a bike rack that is spaced so thats not a problem

mind you when the bikes are on the car is about the length of a football field then

marlin

have done lots of hoops in jeeps they skid hard

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks again, really helpful chap from alpha omega wanted to speak to me, little concerned if this is meant to he aero alloy/ airospace quality and car sitting on drive has caused this.  Airplane are subject to much more changing temp and conditions than road salts! My caliper, many other components much older have surface rust but never eating part of the metal   Had I not seen it , could have been a disaster! specifically on rear part of bracket coming off like biscuit will update on what they say, helpful people so far
    • January or Feb is it booked in for turbo fitment?
    • The MX5 has had some annoying rattles in both front doors over bumps So I installed fancy pants door bushings, which stopped all of the rattles with the windows up, but........with the windows down there was still rattles, so after some googling,  and a chat with MX5 Mania, I got some new door to glass weather seals, all the rattles, windows up, or down, are gone now Shout out to MX5 Mania, the weather seals were on sale, and when I head to Dural to pick the up they even fitted them for me for free I did see a "really" nice Blue NA sitting out front   and this Black NC PRHT that looked like it has sat in the sun for its whole life and never had a wash, the clear coat was non-existent, an it looked horrible, really horrible, but, it had a nice turbo kit with over 200kw, the thing went like a cut snake, bagging the rears through the gears and dosing like a champ 😍 But, as I've always stated, I am keeping my NC na, I'm happy with the current power the car makes In other news: MX5 Mania do a drive in drive out turbo kit, the only minor additional part recommended for boosting my car, as it sits now, is a oil cooler, and that bonnet vents are definitely required for track use Aftermarket version look a bit to "racecar" spec I wonder how Focus RS bonnet vents would look?????
    • Paint is only structural when applied to the outside of Chinese and Indian cars. Otherwise it should never be present between mechanical joints that were intended to be metal to metal. Pain slips, slides, cracks, compresses, and add thickness that wasn't intended to be there. It comes firmly under the category of "just no".
    • appreciated it thanks   There are threads on the adaptor. I rear re anodising but didn’t know it will reduce strength   re mating services needing to be flat/ not painted, why would that be? I am devastated as car been off for a year, fixed power steering then installed bm57 master cylinder and just before driving it this came up. So annoyed   worried and afraid to drive it, no fun caliper coming off    
×
×
  • Create New...