Jump to content
SAU Community

Tyres.. Etc

bluejeans

By bluejeans,
in Victoria

 Share

Recommended Posts

bluejeans Veteran

bluejeans

Posted
Posted

tonight driving home from work of couse I was flagged into the booze bus area

and thats when I had about 3 police go over my car - telling me my tyres were 'bald' - I got new tyres 6 months ago, i drive like a grandma everywhere due to the police attention already..

I was told my rego was taken and if im pulled over again with my current tyres they will take my car off the road..

so is there anything I can do to stop this? especially considering my tyres are pretty damn new and definitely have enough tread...

or do i just have to shut up and accept it and buy new tyres since they are the law?

rwc was done 1 month ago - passed.

same tyres.

Link to comment
https://www.sau.com.au/forums/topic/272228-tyres-etc/
Share on other sites
htial Grand Master

htial

Posted
Posted

Go to a couple of your "big name" tyre places and just double check with them. Also the place you got them fitted and just make sure they are still in good condition.

Get your balance and camber checked as well. A mate of mine got pulled up and one of his rears was bald on the inside. Someone had messed up the balance and camber last time he had his car serviced and it just ripped the tyre apart.

And last. Get a tyre gauge. Or some matches. If you stick a match into your tread and you CAN NOT see any of the red head, you should still have enough tread on the tyre. Also learn where the tread depth mark is on your tyres. There is usually a small triangle on the sidewall. If the tread grove is broken, meaning the depth mark is flush with the tread, then it is time for some new rubber.

Link to comment
https://www.sau.com.au/forums/topic/272228-tyres-etc/#findComment-4623499
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 GTR EV? The leaf of the Godzilla's!

      By Duncan · Posted

      I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      Quick side trip into the engine externals, alternator and PS were in place including tensioned belts, but the PS was dry (my guess is he had the steering rack reco-ed). Filled it up with Transmax Z but it will need more bleeding once the engine is running no doubt. BTW I've said before, I don't know what kind of soft animals you have in the city, but out here they breed the rats tough. I bet they were disappointed when they tasted synthetic ATF.... Coilpacks are Splitfires with a factory loom in reasonable condition. I didn't pull one put I bet the spark plugs are new as its a new engine
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      Onto intake pressure test. I have a Raceworks (damn brand thieves!) pressure test adapter that lets you apply pressure through a standard tyre valve and comes with a pressure gauge.....I just blocked off the other end immediately before the throttle body. Applied 30psi....and the turbo intake immediately popped off with a bang. Sorted that but it was still leaking, turns out there is a pinhole leak at the BOV adapter that I'll have to find a local place to TIG up. I'm sure it makes SFA difference with such a small leak but I want it to be right. Everything else up to the throttle body was good. Also cleaned and oiled the KNX cone filter, and this is the AFM if anyone can identify it (car runs a PowerFC)
×
×
  • Create New...