Jump to content
SAU Community

Recommended Posts

I have dynoed my 09 GTR ADM - its putting out 295.5 kilowatts at all four wheels.

The Jap Spec car on the same dyno (at Croydon Racing Developments) put out 310 kw

Why the difference?

Because the ADM is running 12 psi boost, the JDM (stock) is running 15 psi!

That is why Jap cars are recording 0 - 100 in 3.3 seconds

My HKS 570 kit will be installed in a week. I look forward to bringing you the numbers...

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

hmmm only 14.5kw difference? thats nots too bad.

also this your car? http://www.skylinesaustralia.com/forums/in...t&p=4615239

will be interesting to see the gains after the kit is installed.

Why would Nissan Oz do this - we have same quality fuel in Oz now, and there is simply no excuses to de-tune our cars. I call BS.

PS: 14.5kW is not little, its a fair ammount. Is it possible that 08 model had higher boost, compared to 09 ADM's.

Well 14.5kw is about 4.5% - i've seen that sort of variation merely due to weather in some cars. I dont think it's that much really. Still, if the boost is clearly down, that is black and white i guess. thanks for posting the results, much appreciated! :)

My HKS 570 kit will be installed in a week. I look forward to bringing you the numbers...

Why didn't you go with the HKS GT600 kit? Are you doing the rest of the Exhaust as well?

Cheers

Marty

Why didn't you go with the HKS GT600 kit? Are you doing the rest of the Exhaust as well?

Cheers

Marty

kit availability, price etc. The 570 kit is a pretty bare minimum mod. One could look to turbos, coolers, brakes, suspension etc down the track. I will use a Cobb custom tune as well. Not that keen to fork out the big bucks for a rear exhaust yet...will see what gains the 570 system makes without the rear system (plus don't need the extra noise), and then decide.

I reckon the 570 plus cobb tune without the rear exhaust will be a nice mod that unleashes the potential of the car without being too crazy.

A little off topic here but I have a question for the R35 GTR owners... How do the R35 GTR's compare to the earlier model GTR's as far as being a drivers car goes?

One of the best driving experiences in a GTR ive had was in a lightly tuned R32, the balance and response of the car and how easy it was to control once the car was pushed beyond the traction limit of the tyres was inspirational. Pushing it past understeer into power oversteer balancing throttle and steering etc. My R34 comes very close and will hopefully be as good as if not better with a few alterations I am working on.

I recently saw the new Jeremey Clarkson film called Thriller, and he doesnt like the GTR at all. He tends to lean to ferrari and the lambo's, but I cant help but think he just isnt a good enough driver to push the limits of the R35 GTR. They didnt show him geting the car sideways once on that film.

So I was wondering, how does the R35 GTR feel when pushed to the limits of traction and beyond?

the 35 is every bit a drivers car. you just have to understand it has much higher limits than most and drive accordingly. turn off all TC/ESP and enjoy. It's very easy to slide and great to balance and steer it on the throttle. You can hold nice long, high speed slides in it and even pluck gears mid-slide without un-balancing the car. sure on road you don't get much sense of it as you can't sanely drive i fast enough to get it moving around, so in that respect on road you could argue a honda DC2 type R is more of a drivers car, or a 2 litre 1984 alfa GTV, BUT get the 35 on the track where you can exploit it's strenghs and it's character comes out. you just have to squeeze it a bit. :action-smiley-069: steering is very comunicative, the engine is super responsive and the chassis does what you ask of it, with good pads and rotors the brakes are great too. it has all the boxes ticked really for a good driving experiece. and i'm a hack and I still find them easy to slide around. just ask russ! lol.

the 35 is every bit a drivers car. you just have to understand it has much higher limits than most and drive accordingly. turn off all TC/ESP and enjoy. It's very easy to slide and great to balance and steer it on the throttle. You can hold nice long, high speed slides in it and even pluck gears mid-slide without un-balancing the car. sure on road you don't get much sense of it as you can't sanely drive i fast enough to get it moving around, so in that respect on road you could argue a honda DC2 type R is more of a drivers car, or a 2 litre 1984 alfa GTV, BUT get the 35 on the track where you can exploit it's strenghs and it's character comes out. you just have to squeeze it a bit. :) steering is very comunicative, the engine is super responsive and the chassis does what you ask of it, with good pads and rotors the brakes are great too. it has all the boxes ticked really for a good driving experiece. and i'm a hack and I still find them easy to slide around. just ask russ! lol.

My old 2l. Alfetta GTV gets a mention in this company??? Woot!

Pity my exhaust manifold had a sneaky habit of unscrewing from the block!

Pity the rubber Uni joints would crack every 30xxxKm

Pity my Alfa Romeo Umbrella would form abrasion holes after what ....10 outings??? wtf lol

I had my car 'Endrust' treated the day after I bought it = No rust when I sold it lol

THIS CAR TAUGHT ME THE ART OF PERSEVERENCE! ;)

I would have expected more than 14.5kw difference for 3 psi boost.

why? if the turbo's are already at the limit of their compressor efficiency (highly likely given Nissan obviously wanted the target power with the lowest transient response times possible), winding in 25% more boost isn't going to add 25% more power due to the fact the tiny wheels just rapidly start heating the air (and lowering the charge density) instead.

Guys...one thing to remember...every engine is hand built, you will get "strong" engines and also "weaker" ones. the 14.5kw is nothing.

i really doubt it- given the quality control and ultra-high accuracy of the tolerances, i'd be surprised if you saw factory-spec VR38's running outside of + or - 5hp at the fly when tested under identical engine-dyno conditions

I agree with Shawn. The whole point of hand assembly in climate controlled rooms is to achieve a high degree of repetition in tolerances. When something measures up out of spec it goes into the rubish bin as a rejected component.

Now if it was australia that was making the R35 you wouldnt want an engine that was built on a monday or a friday. Hopefully that wont apply to the R35 being built in japan.

And thanks Beer Baron, I suspected Nissan had just raised the bar with the R35. Clarkson probably wasnt game to push the car to ITS limits because of the neck injury he got when test driving the R35 in Japan.

Edited by GTRNUR

Well on the weekend at the ATC held in Vic there were 2 dead stock ADM R35 GT-R's that when both used LC in Auto R/R/R over an 800m drag on the Holden Proving Ground Speed Bowl were nearly 1s different in times. Each car had 4 runs and all 4 runs for each car were basically exactly the same time BUT the 2 cars were around 1s different (and around a 10km/hr terminal speed difference). Car 1 did it in around 18.2s with top speed of 250km/hr and the 2nd car was 18.9s and 142km/hr.

So not all R35's are created equal even when comparing ADM v ADM let alone ADM v JDM.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • $53.35 and a double din Pioneer head unit that I have...
    • Put a camera facing your dashboard so you can film the gauges. Head out to a straight but of road, and filming it as you go from a stand still at wide open throttle to as fast as you can/feel comfortable doing. Then film the dash board as you for example accelerate like normal onto a freeway. This will give us an indicator from Speedo of your expectation of slow, and will give us the rpm reading too to see if it's shifting. (Auto still has tacho from memory)
    • Buy yourself the cooling system pressure tester. Being able to pump it up, and have a gauge on it, AND have a cold engine makes it much easier / practical to diagnose. Additionally as the engine isn't running, you can listen for pin hole leaks as well as watching if pressure drops away. In addition, you can pressurise and while doing so, watch all the little rubber hoses. Some fail very brittle, and will just leak, while others can end up very soft and bulge. While a bulging hose isn't necessarily leaking, one of those small ones starting to stretch / expand in a bad way is an indicator that you'll be looking to replace that one soon   Depending on if this is a project car, or you'll be dailying it in the summer months would alter how I'd be most comfortable with driving the car and how I'd replace. If you're planning to use it as a daily, with no backup, I'd pull the engine, and replace all the external oil/water lines in one big swoop. At the same time do the timing belt, water pump, tensioners etc. Do not open the engine at all. We just want to replace all the things that are inexpensive as a single item, but a PITA when they go. By doing the above, you've made the car from a bunch of age related issues more reliable. If it's a project, and you like swearing while trying to reach into dirty hard to reach places to replace a single hose that may or may not be the leaky one. Just replace the leaking/bad ones as they need it. If it's a project and you'd rather swear at the car once and enjoy it as much as possible, then refer to the process I mentioned in how I'd want to do it if it were a daily. However, the approaches above do come down to how much spare pocket change you have. Pulling the engine and dropping over a thousand dollars on parts, may not be practical for you. Oh, if engine outing, I'd replace as many silicon/rubber inlet joiners as possible too.
    • Yeah, they're pretty dumb though...ie; they'll throw a solenoid error if the solenoid is dead, shorted, wiring is open circuit, or even if the driver transistor has failed (they can't self-diagnose much, they can only test inputs/outputs)... but if you wanted to try, I believe it's this protocol....(uses a long pulse indicator with short pulse counter)...    
    • Yeah I'll do what I can without taking off any major parts for now. If it becomes clear I won't get far with the engine in the car I'll have to think about the next steps. I am not too stuck on keeping everything 100% OEM, if there is better solutions, like converting most lines to braided with AN adapters, I'd rather do that than buy overpriced new "shit" parts.
×
×
  • Create New...