Jump to content
SAU Community

Recommended Posts

Wouldn't you know it. After this never having happened to me in the 9 months I have had my Stag.... Upon reading this threat the other day and becoming aware that this was possible.. my wipers began doing the same thing!

DAMN YOU MURPHEY!!!

  • 4 years later...

I hate to bring this topic back to life but I have the same problem, studder when using intimidate setting. I have replaced the blades and both linkage arms but still no success. I pulled the wiper arms off and ran the motor with just the linkage arms and it still studders. Any help greatly appreciated. 

  • 2 weeks later...

I read somewhere that the motor can benefit from a refresh and I’m sure there’s a how to on a US G35/V35 forum somewhere... I just fixed my stutter with some new blades but have fresh linkages ready to go in just in case. Was really hoping it was one of the two and not the motor! Sounds like you might be unlucky :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...