Jump to content
SAU Community

Recommended Posts

makes a toolmaker / fitter and turner look like an easy job these days in comparison to the old days.

just looking at those photos makes me cringe, im glad i've never had to machine stuff like that.

makes a toolmaker / fitter and turner look like an easy job these days in comparison to the old days.

just looking at those photos makes me cringe, im glad i've never had to machine stuff like that.

Not alot better these days with some of the large transport ships

post-59638-1246918062.jpg

post-59638-1246918088.jpg

post-59638-1246918104.jpg

post-59638-1246918117.jpg

Some facts on the 14 cylinder version:

Total engine weight:

2300 tons (The crankshaft alone weighs 300 tons.)

Length:

89 feet

Height:

44 feet

Maximum power:

108,920 hp at 102 rpm

Maximum torque:

5,608,312 lb/ft at 102rpm

Not alot better these days with some of the large transport ships

post-59638-1246918062.jpg

post-59638-1246918088.jpg

post-59638-1246918104.jpg

post-59638-1246918117.jpg

Those pics are insane. I would have thought for something that big that they'd mount all the bits together inside the boat itself

-D

apparently they make enough power to power a small town or something to that effect.

there ya go

Each submarine is equipped with three Garden Island-Hedemora HV V18b/15Ub (VB210) 18-cylinder diesel engines, which are each connected to a 1,400 kW, 440-volt DC Jeumont Schneider generator.[56][121] The combined electrical generation capability of each submarine is 4.2 megawatts.[130] The Hedemora diesels were chosen because of modular construction, which made servicing easier; they could be installed three across in the available space, while other contenders required at least two banks of two; and they ran with turbochargers driven by the exhaust gas.[88] Fifteen diesel fuel tanks are located throughout the submarine: they must be used in specific sequences to preserve the submarine's trim.[131]

1.21 gigawats :down: V18 apparnetly maybe i heard wrong. No pics though, cameras not allowed here

but theres this from public collection

http://en.wikipedia.org/wiki/File:Mark_48_...edo_testing.jpg

Edited by Inline 6
apparently they make enough power to power a small town or something to that effect.

there ya go

Each submarine is equipped with three Garden Island-Hedemora HV V18b/15Ub (VB210) 18-cylinder diesel engines, which are each connected to a 1,400 kW, 440-volt DC Jeumont Schneider generator.[56][121] The combined electrical generation capability of each submarine is 4.2 megawatts.[130] The Hedemora diesels were chosen because of modular construction, which made servicing easier; they could be installed three across in the available space, while other contenders required at least two banks of two; and they ran with turbochargers driven by the exhaust gas.[88] Fifteen diesel fuel tanks are located throughout the submarine: they must be used in specific sequences to preserve the submarine's trim.[131]

1.21 gigawats :) V18 apparnetly maybe i heard wrong. No pics though, cameras not allowed here

but theres this from public collection

http://en.wikipedia.org/wiki/File:Mark_48_...edo_testing.jpg

Yeah those engines are just used to generate electricity, the final drive motor is all DC... the big ship engines have the crank directly connected to the screw, which is why they have something like a max rpm of 300 but still do 100,000 odd horsepower ;D

-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So my R32 GTST has been sitting around at my old mum and dad's place for a few years now...and it's time to bring it home. Main issue I have is that she hasn't been started in about 5 years or so, so I'm not too keen on just kicking it over and hoping that RB20 reputation for being un-killlable extends to long periods of neglect. My plan is to get it running there so I can move it around,  then get it towed back to my place where I can start working on it properly. The old folks driveway is a bad place to start a project like that. I'm getting old too and also haven't stuffed around with cars since forever, so kinda learning this stuff again. So far I've siphoned out all the shitty old fuel and topped up the coolant (thought it was fully dry but took 2 litres to fill the radiator). Planning on hitting the rusty rotors with some brake cleaner in case the tow truck driver gets a bit gung ho loading it up. As far as oil, it's got plenty although it's now dark in colour and obviously needs a change sooner rather than later. Was doing some YouTube research and was planning to hand-crank the motor from the harmonic balancer with a 37mm socket and breaker bar, removing the spark plugs and spraying some "fogging oil" in the holes but there's not much room to get in there with the radiator fan right up against it. Jacking the car up takes too long and I can't leave it half done between visits. So now I'm was thinking of cranking a few times it using the starter (removing plugs and spraying oil first). Reckon there's any chance it will do more damage that way if something's stuck inside the motor? Should I really change all fluids completely before I go any further? Grateful for any other advice you guys have to get her going safely too.      
    • Well, that's just wierd. Amongst a string of seemingly benign introduction and request for help threads, we have this one with a link.... to another, unrelated thread inside this forum. Colour me suspicious.
    • Sorry to say, I think that is a pretty long shot on this forum.....
    • sorry, "info" from Lumley here: https://www.lsvcarinsurance.com.au/about-nrma-insurance
    • So it looks like Lumleys are closing other than in Victoria, with the kind offer that another brand from the evil IAG multi-glomerate (NRMA) might offer insurance under their price and conditions if they want to, as an alternative. Lunmleys was good for us because they covered JDM and USDM imports, had 2 car "stable" insurance (ie, insure many cars but max of 2 can be driven at once), covered mods, reasonable overall prices. So, with them gone, who else should I consider? Shannons is last on my list, we used to be insured with them until we found they were helpful at taking premiums but much less helpful at claim time.
×
×
  • Create New...