Jump to content
SAU Community

Recommended Posts

yeah my chrome fail comment was a little broad

As long as its not a genuine m3, has altezza tail lights but no engine mods and 3 tv's per vehicle occupant, those rims are acceptable..

their those CCW wheels yeah? they look damn good and are pretty cheap too

Last time I priced up a set of CCW classics (when I still have the Celly), I was looking at a little over $6k shipped...

Last time I priced up a set of CCW classics (when I still have the Celly), I was looking at a little over $6k shipped...

really? on theyre site it says theyre $2500 a set. how much was the shipping?

edit: even if you went the powder coat and arp stud route youd only be adding around $850

Shipping was was an astronomical amount. Somewhere around the $1500 mark. 22lbs a wheel, in customs sizes and specs with upgraded hardware. Though it 'starting at $2500' 3 years ago when I was looking at them.

  • 1 month later...

I am getting so f**king excited about this car and everything it represents. Starting weight of 1180kg for the base model, and 1240kg for the range topper, with the same power as the last locally delivered S15, and all with fuel economy good enough to make it suitable for daily duties... Yeah, I'm pretty keen.

Has been confirmed by Toyota for sale in Australia, and Subaru won't be far behind when they figure out how they're going to market it without their symmetrical all wheel drive safe tag, Tom's and TRD are already looking at warmed up versions, Toyota themselves want owners to modify and personalise theirs. So refreshing.

388144_281225668581543_185851534785624_731367_1982929347_n.jpg

375364_281298231907620_185851534785624_731511_2001148231_n.jpg

381677_280072305363546_185851534785624_728861_1561423421_n.jpg

383248_280888908615219_185851534785624_730782_1393857537_n.jpg

386822_279975552039888_185851534785624_728403_240486790_n.jpg

388144_281225668581543_185851534785624_731367_1982929347_n.jpg

Non turbo 2.0 litre boxer direct engine with 147kw, STi BRZ may be turbo, 6 speed manual, or 6 speed paddle shifted auto, LSD, rear wheel drive, and all in a 1200kg package.

As for price, Toyota is aiming for the low $30k range.

Yeah according to Speedhunters, they have already released info to the Nippon Aftermarket Committee so manufacturers and tuners can start production of aftermarket parts! New car owners will have the option to change out the suspension and add aero mods on day 1 of ownership!

I am getting so f**king excited about this car and everything it represents.

THIS!!! What a revolution. Best thing a car company has done in a long time.

Cant believe Nissan tried their darndest to exclude the GTR from the aftermarket scene, why not encourage personalisation and stimulate the aftermarket economy!

In short, the car gives me a hard on. Looks wise, not so much, but the potential.... huge.

I'm a big fan of the way they look.

That second photo I posted shows a couple more or less confirmed options for when it goes on sale in North America/Europe, fixed back seats, harnesses, and TRD gauges.

It's something I would never have expected from Toyota, openly embracing the aftermarket. I imagine the options list will be pretty immense by the time it hits dealer floors here.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Getting Dangerously close to being ready to go back in the car. Rockers in with clearance castings now (and a quick check with the USA for the torque settings for the larger custom bolts) Covers and ported FAST Manifold sitting on there. Not fully tightened down as there's some clearancing required for the water pump with the earlier LS1 water pump styles. Example of the clearancing needing to be done: The body has to be ground a little but I'm struggling finding an actual piece of it. The later variant of water pump resolves the issue as the manifold was designed around it. It only came on the VZ LS1 in Australia, it got a different pulley for Gen4 motors. (it also costs $450... vs... $0).
    • https://files.fm/f/5atwkuvcjd
    • Doing some height adjustment on front suspension on a v35 and noticed this. The passenger side looks correct. So wondering what's happened to the drivers side?
    • Oh...I have the electric mirrors as well iirc ...they're in the same state as just about every other R31 door mirrors, with the 3 plastic screw towers broken/cracked in the plastic molding. All the interior is 'dry', so the mirror switches etc likely all work fine. Some pics below of the trimmer pieces ~ looks to me like previous owner, painted chrome finished trims with black paint ...ergo, the chrome underneath is likely a-ok... ...starts to look yukky posting stuff like this, how much did it cost in fuel on your last sortie up this way?...me just thinking aloud, borrow someone else's 4cyl to cut costs, come do your own pick'n'pull like before to save me some bother...hehe.. but whatever, I'll just earmark bits I know you want, because the way this is all panning out, I'll be able to retire the R31 from daily duty at long last, replacing it with a Subaru wagon I'm lining up in the wings...ergo, my attitude towards the donor pinny shell is starting to wane a bit, and I'm more than happy to help you out there... Like you say though, no rush...and I'll guarantee we won't be moving too far from this locale at any rate 馃槑
    • Cool, I鈥檓 just down Sydney today. Not much time to get online.
  • Create New...