Jump to content
SAU Community

Lowering Springs

i like beer
 Share

Recommended Posts

i like beer Apprentice

i like beer

Posted
Posted

hey every 1 i was wondering if i could get some advice on good springs for lowering my car, i hav an r34 skyline sedan with kyb adjustable shocks. i see places around advertising $400 to get your car lowered with king springs, is that the best way to go? cause at the moment it looks like a 4 wheel drive its so high so i need it lowered asap.

cheers

:ninja:

Link to comment
https://www.sau.com.au/forums/topic/272595-lowering-springs/
Share on other sites
2LV8ETR Mentor

2LV8ETR

Posted
Posted
is the price much different in the two? i would rather fork out that bit extra cash to get quality springs, and will the shocks be good enough to handle the car being lowered?

If you prefer to fork out the cash to get the better item, go the coilovers.

If you can't afford it, the Kings will do but make sure your shocks are in fairly good condition. If they've been in the car for a while, swap them out too. The only issue if you have to swap them out, is that you'll be close to the price of a set of coilovers.

I ran with Kings for a while and I was happy, until I put the coilovers in. BIG difference.

Your call.

Wacky Dee Veteran

Wacky Dee

Posted
Posted

which coilovers though? There are so many different ones. I hear Tein's Superstreet (Aust Spec) are awesome. Shame I'd been convinved to get Bilsteins + stock springs when i was changing mine .. not happy with this setup (too rough a ride)

2LV8ETR Mentor

2LV8ETR

Posted
Posted

I'm running HKS Hiper-D's, a mate is running Tein's and another mate is running Cusco/Ohlins.

All are excellent and make a big difference.

I have heard of others using different brands, but you need to take into account reliability and availability of parts for rebuilds.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 power steering

      By GTSBoy · Posted

      49719 is the cooler loop. Right at the front, LHS of that diagram. Return line from rack (LP side) goes to cooler loop on RHS front of car, then back under engine and returns to bottom of tank. 49717M is feed from tank to pump. HP line out of pump is thick rubber, followed by the hard line that runs down to crossmember and runs in parallel (but opposite flow direction) to the LP return line. Nothing goes anywhere near the firewall or interior of car. The closest they get to that is the connections on the rack.
    • drifter17a
      R34 power steering

      By drifter17a · Posted

      Thanks, plan is to drain all fluid tomorrow and do smoke test to find out the leak.   Appreciate your help and want to understand how the system work. So cooling is achieved by the long loop not any rad? The diagram seems to suggest it connects to somewhere inside the cabin and I thought that is a cooler inside firewall. If you look at the diagram it seems to show it connects to something inside firewall. I tried chasing it but not easy unless I take loads off   i am confident pump is good as fluid goes in and it gets soft( steering) but as soon as I turn engine off , loads of bubble come to surface and overflow. When engine is on , fluid level is below minimum but when off it shoots off and thinking it is sucking air in. I suspect aluminium pipe may have a crack line or whole   smoke test with no fluid should be a good start and if needed will remove the pump   In addition, the one going under the engine bay is high pressure line and one directly connecting from pump to resorvoir is return/ low pressure?   finally I searched and suggestion is to use dexron 2 but that is discontinued so bought dexron 3 as all research suggest it is compatible and shouldn’t cause any issues/ blow seals. I bought two liter of dexron 3 motul atf
    • GTSBoy
      RB25 S2 Idles but doesn't want to rev

      By GTSBoy · Posted

      Don't worry about. Just don't try to drive hard enough to make boost and you'll be fine.
    • GTSBoy
      R34 power steering

      By GTSBoy · Posted

      Yes. This has already been said. It is a loop of hardline in front of the radiator. Because.... the pump is on the LHS and the steering rack hydraulic connections are where they always are on a RHD steering rack....on the RHS. The high pressure line goes down under the engine, along the crossmember, like it does on all Skylines. Don't just throw expensive braided hoses/other kits at it. Work out what is wrong and fix that.
    • Trilbyte
      RB25 S2 Idles but doesn't want to rev

      By Trilbyte · Posted

      Still got the afm on the intake, clamps are shut tight, only loose hose is the one that goes from the j pipe towards the IACV, since it's next to impossible to find a factory hose and the barbs are different sizes (I'm still using clamps on this hose to try and help it seal on the iacv side) I've ordered parts to make up the hotside of the intercooler pipes, I'll plumb it in and see what happens in a few days I suppose The turbo's internally gated, can I just unscrew the tension rod to let the gate open?
×
×
  • Create New...