Jump to content
SAU Community

Recommended Posts

  • Replies 383
  • Created
  • Last Reply

Top Posters In This Topic

ask and ye shall receive.

http://www.japaneseimportspares.com.au/par...riescoilovers/2

potenza 10/10 coilovers for 33/34 GTR, $950. get on it!

Never heard of potenza shocks, any good? Was looking at super streets or greddy somethings which are closer to $3k :D

hi guys, sorry for the lack of updates. i have been overseas on holidays recently and only now getting back on top of things/email.

as you all know the trackday course is three weeks away. you should have all paid the balance / full amount by now, so i will post up the list of paid drivers (as confirmed with John Bowe Driving) in the next few days. you've only got a couple of weeks to do servicing, check all fluids, tires and pads, so please get on to this asap. you don't want to be doing that sort of stuff the night or morning before the event! hopefully no one has any problems at this point.

  • 2 weeks later...

ok, here is the list of people who are all paid up for the trackday (from John Bowe Driving):

1. moodles2

LukeENR34

TypeVU

Heslo

scandyflick

joshDC

Hostile

Nightcrawler

Krishy

32godzilla

Inline6

writeoff

ripp3r

14. bengi

you should all have received a confirmation email and invoice/receipt from Dean at John Bowe Driving by now.

i just need to hear back from Red Back (sorry, i don't know his real name) and Chalon as to whether they have paid the balance and received their receipt from Dean at John Bowe Driving. if anyone knows how to get hold of them quickly to confirm, please let me know!

cheers

I dropped off my car at Manta on Monday with a LONG list of things to get fixed before this event. I dread the bill I am going to receive but I need my 4WD, ABS, PFC, intercooler, brake ducts and engine working properly plus a stack of other things. The rest can wait until after the big day. Hopefully the GTR will be ready and I won't have to take the Pug.

all sorted. chalon has emailed me and will sort out his stuff today.

Krishy - i have asked Dean to re-email you the receipt.

looking good guys - i will send out / post some pre trackday tips and meeting point suggestions next week to help with finalisation of your preparations.

cheers - Kim

i would like to go but my car is still getting work done to it so no go for me. :D

really good opportunity to gain better driving skills and to learn how your car will react.

anyway have fun guy's it will be a blast.

Krishy - i have asked Dean to re-email you the receipt.

Cheers mate

i would like to go but my car is still getting work done to it so no go for me. :D

really good opportunity to gain better driving skills and to learn how your car will react.

anyway have fun guy's it will be a blast.

Yeah i cannot wait and see what the car is like on the track....also hoping that someone can get some good shots

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...